100% Beginner Step by step how to carve a woodspirit- chainsaw. #2

Поділитися
Вставка
  • Опубліковано 23 лис 2024

КОМЕНТАРІ • 58

  • @Jax9639
    @Jax9639 3 роки тому +3

    You are a natural teacher, no techno babble, easy to follow and understand

  • @ericleong1453
    @ericleong1453 3 роки тому +2

    Like your loud and clear voice with good camera setup viewing

  • @deannaturcotte7827
    @deannaturcotte7827 9 місяців тому +1

    Excellent videos on wood spirit thanx Jordy

  • @ericleong1453
    @ericleong1453 3 роки тому +2

    Step by step fantastic instructions

  • @OzarkArtsandCrafts
    @OzarkArtsandCrafts 2 роки тому +2

    Just getting started with chainsaw carving so watching your beginner chainsaw lessons. Good advice and instructions

  • @jimrodger5341
    @jimrodger5341 3 роки тому +2

    Great vid Jordy I am just starting chainsaw stuff very helpful 👍🏻👍🏻🏴󠁧󠁢󠁳󠁣󠁴󠁿🏴󠁧󠁢󠁳󠁣󠁴󠁿

  • @andrewevans3773
    @andrewevans3773 3 роки тому +1

    Brilliant Jordy Jordy you know you said you were using a battery chainsaw can you also get a petrol one an also a corded one .take care jordy an thanks again for the lesson

  • @clays_carvings8359
    @clays_carvings8359 3 роки тому +1

    Be using these vids when I get my battery saw 👍

  • @jayc3110
    @jayc3110 3 роки тому +2

    Another great lesson, with great camera angles to show us detail. Your simple chainsaw sharpening technique was awesome . Thank you and " carry on!" Will wait for the next lesson. Thank you.

  • @neilfreeman4443
    @neilfreeman4443 3 роки тому +1

    very good videos for me learning thks Jordy

  • @pamelalee1508
    @pamelalee1508 3 роки тому +1

    🍎🍎🍎🍎🍎's for the teacher..👍😊...
    Carry on teach...😘...🌿🌿🌿

  • @fabiaolima
    @fabiaolima 2 роки тому +1

    Thanks for your tips, Jordy! Congrats from Brazil!

  • @tonylawson8116
    @tonylawson8116 2 роки тому +2

    What are you using to sharpen your chain jordy?

  • @rickmeisch472
    @rickmeisch472 3 роки тому +1

    I should'a took classes to be a stylist but thanks for the tips for sure

  • @ricksmith3125
    @ricksmith3125 15 днів тому +1

    Do the battery saws chain run loose compared to a gas saw ? I see you have a pretty loose chain I'd be scared of it flying off

    • @CarvingFusion
      @CarvingFusion  14 днів тому +1

      U have to keep the chain loose on all carvi ng bars because there is no sproket at the end

  • @Bobw2bs
    @Bobw2bs Рік тому +1

    Is there a third video for this project?

  • @evilevilrick
    @evilevilrick 3 роки тому +2

    I'm watchin. Hi jordy.

  • @NorCalSucculentShop
    @NorCalSucculentShop 3 роки тому +2

    Looking better and better. Now I have to carve chins. Hahhahah

  • @charliemedley7699
    @charliemedley7699 3 роки тому +1

    Get er done. Good video.

  • @Blueboy9055
    @Blueboy9055 3 роки тому +1

    Looking good Jordy 👍👍

  • @jeremyromine9718
    @jeremyromine9718 3 роки тому +1

    Awesome. Carry on... Carry on.

  • @augustcalderaro3797
    @augustcalderaro3797 3 роки тому +2

    Excellent presentation Jordy! Thank you!

  • @davidrogers6694
    @davidrogers6694 3 роки тому +2

    Always a pleasure watching and learning from you bro thank you for all you do hope all is well

  • @milwaukeejay
    @milwaukeejay 8 місяців тому +1

    Do you prefer electric because of the less noise, off on, smell.etc. ...carry-on

    • @CarvingFusion
      @CarvingFusion  8 місяців тому +1

      No I prefer gas as they cut faster but it is nice to have no fumes or noise

  • @erickjarquin2355
    @erickjarquin2355 2 роки тому +1

    Jordy you are a Bad Ass Dude!!!
    I will try to replicate your art.
    Thank you for Sharing your Knowledge & Wisdom!!

  • @nonameissafer.8457
    @nonameissafer.8457 2 роки тому +1

    I have two huge oak Stumps. Is it too hard of a wood to carve?

    • @CarvingFusion
      @CarvingFusion  2 роки тому

      Nope should not be but word is it cracks alot

  • @tonylawson8116
    @tonylawson8116 2 роки тому +1

    What size bar are you using on that 140c jordy?

  • @GeoffPSU
    @GeoffPSU 3 роки тому +1

    Another nice video!

  • @billshelton6185
    @billshelton6185 3 роки тому +1

    How can I send you pic. Of Carvings

  • @johnwoods6296
    @johnwoods6296 3 роки тому +1

    Love it, gunna do this, just bought a Stihl170 coz you recommended it in your last video, or should I have bought the electric baby?waiting for it to be delivered after buying st our national fieldays."

    • @CarvingFusion
      @CarvingFusion  3 роки тому

      U will need to put a 1/4 sproket on it and chain for a carving bar

  • @johnwoods6296
    @johnwoods6296 3 роки тому +1

    Also, can I carve my wood spirit in a poplar log coz it’s softer and I have shitloads since it’s growing on my property, tho I can get pine down the road where the damned pine forests are taking over farmland here in New Zealand.

  • @phillipjackson2877
    @phillipjackson2877 2 роки тому +1

    Just wanted to know how long your battery last while carving? I’m considering a battery saw since I live in a residential area.

    • @CarvingFusion
      @CarvingFusion  2 роки тому +1

      Depends really. How fast and hard u carve

  • @garypaulson5202
    @garypaulson5202 3 роки тому +2

    Excellent videos Jordy! Going to try this with my $40 Harbor Freight electric corded chain saw, which I think comes with a pruning bar.

  • @michaelwray4359
    @michaelwray4359 3 роки тому +1

    Wow 🤩

  • @alanterry6683
    @alanterry6683 3 роки тому +1

    Watching…

  • @paulmcquillan9171
    @paulmcquillan9171 3 роки тому +1

    Not bad chainsaw

  • @milwaukeejay
    @milwaukeejay 8 місяців тому +1

    Why do I have alot of kick back

    • @CarvingFusion
      @CarvingFusion  8 місяців тому +1

      Most likely because ur not using the Bottineau tip of the bar

    • @milwaukeejay
      @milwaukeejay 8 місяців тому

      🤔

  • @tomcurran1538
    @tomcurran1538 2 роки тому +1

    After a while you cringe, because it looks like he's cutting a live guy!

  • @arthurh4354
    @arthurh4354 2 роки тому +2

    I believe you try to act or sound like you chain saw friend to much . Be your self. It’s nice you get tips from others but your videos are just parroting other utubers and I think that’s steeling others artistic material and makes you look fooling . Like when you said you made up a word the other utuber did the same thing on his video and you copied him and not I don’t think I’ll watch anymore of your videos and watch more of his . Keep working and doing what ya do but be yourself Bro 😎