LIGHT UP YOUR TRUCK BED!! HOW TO INSTALL BED LIGHTING 5ft BED AUXBEAM
Вставка
- Опубліковано 16 вер 2024
- IN TODAY'S VIDEO I WILL SHOW YOU A CHEAP MOD TO LIGHT UP YOUR BED. IF YOU HAVE A CAMP, A COVER, OR A BED TENT LIKE MYSELF THIS PRODUCT CAN BENEFIT YOU.
Purchase your white 60" AUXBEAM LED STRIP:
www.amazon.com...
OR Purchase your RGB 60" AUXBEAM LED STRIP:
I ASSUME NO RESPONSIBILITY IF YOU DO THIS WRONG. THE WAY I DID IT IS FOR MY NEEDS. THIS IS A PLUG AND PLAY PRODUCT PER AUXBEAM.
For Business Inquiries: jesserizoyt@gmail.com
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
VISIT YOUR ONE STOP SHOP TACOMABEAST WEBSITE:
tacomabeast.com/
I use Viar 300p compressor for up to 33" tires: www.viaircorp....
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
WATCH MY PREVIOUS VIDEOS:
MY 2018 TACOMA ON 33'S REVEAL VIDEO:
• 2018 TOYOTA TACOMA TRD...
2016+ TACOMA HEADLIGHT INSTALL HOW TO:
• 2016+ TACOMA HEADLIGHT...
2016+ TACOMA TRD PRO 2018 GRILL - WITH SENSOR | HOW TO INSTALL
• TACOMA TRD PRO 2016-20...
2016+ TOYOTA TACOMA TRD MBRP EXHAUST HOW TO INSTALL
• 2016+ TOYOTA TACOMA TR...
2016+ TACOMA HIDDEN BUMPER LED LIGHT BAR:
• 2016 2017 2018 2019 TA...
UNBOXING TACO PARTS/MY TACO PLANS:
• UNBOXING ALOT OF TACO ...
2016+ TACOMA LED POD FOG INSTALL:
• 2016+ TOYOTA TACOMA LE...
AJT KEY FOB INSTALL & REVIEW:
• AJT DESIGN INJECTION K...
2018 TOYOTA TACOMA TRD CHROME DELETE (COLOR MATCH)
• 2018 TACOMA TRD CHROME...
MY NEW TRUCK REVEAL:
• 2018 TOYOTA TACOMA TRD...
NOICO SOLUTIONS INSTALL:
• NOICO SOLUTIONS SOUND ...
HOW TO INSTALL AN AMP TO A FACTORY RADIO:
• HOW TO INSTALL AN AMP ...
HOW TO INSTALL FRONT DOOR SPEAKERS ON A HONDA CIVIC
• HOW TO INSTALL FRONT D...
Adam's Polishes Foam Gun | WORTH IT?
• Adam's Polishes Foam G...
Auxbeam LED Review
• Auxbeam LED Review | H...
THE BEST CAR DRYING TOWEL REVIEW
• THE BEST CAR DRYING TO...
EZ LIP REVIEW + INSTALL
• EZ LIP REVIEW + INSTALL
EZ LIP PRO DURABILITY TEST
• EZ LIP PRO DURABILITY ...
THE BEST IPHONE VLOGGING SETUP
• How to turn an IPHONE ...
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
THANKS FOR WATCHING
PLEASE,
Like, Comment, & Subscribe
for more DIY FOR CARS, RANDOM VIDEOS, CAR VIDEOS.
FOLLOW MY INSTAGRAM @_jesserizo
This video never gets old for me! I simply love how easy you explain things!
I'm doing this same install but with a mod that makes the lights turn on when the tailgate opens, only if it's dark enough!
Tried this a few months ago but unfortunately the lights shorted as they weren't fully waterproof. lol
Keep up the great content Jesse, you inspire people like me!
" Now you wanna go ahead " x 1000
Wow.. You have so much knowledge.. The truck looks AMAZING 😍
Thank you :)!!
bro this is why I need to live close to you so I can chill with you and mod my truck
Not gna lie that would be dope 😎 I’d be down!!
Thank you for making it by my channel, Jesse Rizo!
Showing you some love with a _full play_ and a big like from Bits of Real Panther!
May your day be the best one ever, friend!
Jesse ‘like I said’ Rizzo
😁
Jesse Rizo love your content bro! Keep it up!
That will be great on the trails at night for sure! Great install video!
Heck yea I went camping last week and it worked out great when setting up my tent lol!! Thank you 🤙
Clicked on this because of that dope thumbnail. I enjoyed this one Jesse, big thumbs up :))
I was really scared, I'm glad you showed us how to splice wires.
Thanks for watching :)
Geez u are so smart and talented! This looks cool!
Thank you :)!!!
Something different lol!!
The lights look so nice and bright! Really cool Jesse :) left a like
Thank you Sophia :)!!!!!
Hey Jesse, you should be able to cut those strips in between the led lights to the length you need. Those led lights usually come in big bales from China so they are made for you to cut it the length you want. Watch a video by Trailrecon where he made something very similar for his back rear window of his Jeep. You just need to use the electrical tape to clean up the end you cut to kestrel out. Planning on using this on mod on my truck as well.
I had asked my source at auxbeam they recommended not to do that that’s y I didn’t even mention it but I believe u can but to me it’s fine there functional so I didn’t even mind that little part thanks though my friend :)
Great video jesse! You're taking off now just like sarah! This is just the beginning for you! Congrats
My good friend Wendy :)!!!! Thank you 😁😁🤞😁, have u talk to her lately? , her channels huge now :0
@@JesseRizo not much. She's on the grind! So happy for her!
I’m with you on that Wendy :)
Looks super luxurious!
Thank you :)!!
Truck looks really good with those lights. Great job. It does look "super simple." Amazing job with the step by step my friend. 🤙🏻😁
Thanks Danny :)!! I appreciate you my friend 🤙
Aye you are the king of car installs! Happy holidays and dipping over to give this gem a full view. Hope you are doing great:)
Thanks tosh 😁😁😁
Hardly a king would have done it correctly..... let’s call this what it is the ghetto install
Thanks bro. Just followed your video, easy install.
Huge difference Jesse, job well done my friend. I like it. 👍🍻
Thank you :)!!!
“Super simple”
Jessie rizo
Lol
Bro that bed looks sick lit up...ive never seen that around where im from. Awesome tutorial
It’s different that’s forsure lol thanks my friend
@@JesseRizo np brother
Dude where the hell have I been, almost 5k?!? That's insane, congrats my friend that's awesome! And cool lights of course😀
U tell me :0 lol!!! U been mia lol, thanks for still sticking around 😁😁😁😁
Couple things. First off, thanks for the video, making a video while doing this install can't be easy. I did this install with my ram but didn't use the switch, I wired it straight to my cargo lights so they just come on with my cargo lights. If you want to tie hot wire it, you don't need to run it all the way to your battery, you can connect it to your fuse box. Wiring it to the cargo lights makes it so you don't have to run it into your cab at all and you don't have an ugly aftermarket switch in your cab. Also, less exposure for the wires, I think you're okay here but use a solder. They're cheap and you're use to get a secure and safe connection. Either way, thanks for the video. Lights look great.
Great job Jesse very helpful video thank u hope u are having a good week
Thank you Amy Iam :) hope u r to
Jesse, another good video and how to!
Looking forward to the next one, thanks for sharing.
Thanks my friend I appreciate that :)!!
Jesus man this is one long video but regardless very informative and creative af. That bed lighting could actually be pretty handy when working at night or late and you're haling maybe wood and stuff on the back or maybe even for a late night truck party. Anyways good installation video jesse keep it up man! :)
I’m thinking a night truck party 😎🤙 lol jk!!! Thanks bro :)!!!
yo man this looks lit! 😸😸 hey real great nstall and I can't believe you did it at night time and the video came out real good. I murdered the like button #96
I was worried it wouldn’t be good to be honest lol, thank you :)!!!!
P.s another giveaway tomorrow ;) if u want to enter lol
Me: damn this is a good channel, I need to subscribe.
Also me: *looks down* oh shit I’m already subscribed.
If I could subscribe twice I would. Five thumbs up!
Great video, looks really sweet! But man.. it hurts my soul to see that nice of a truck so muddy, especially under the hood lol
Thanks my friend :)!! And lol I’ll probably stop getting it muddy atleast for a while it hurts me to believe me lol then it’s a pain to clean 😂 but sometimes when I’m out we hit mud spots that’s why :/
FYI +: Dude, at 11:44 you show the light strip. You can cut 6 of your LED's off at the cut mark and they'll be the right length. Still a good job
Looks good and I will be doing this on my tundra
Awesome it’ll probably fit a lot better since the bed is bigger,
Thanks for watching my friend
Jesse i like your videos. I have 2 of those white light that you have on the floor in my bed and is enough light for me just change batteries when is time.
Thanks my friend :)!!!, that’s true that’s a good light source as well I got those at harbor freight lol
Siiick install I never thought about it.
Just something a little different lol thanks for watching
Great job Jesse!
Thanks my friend :)!!
Ok, loved the video! Great lesson in wiring and pretty well done. Question; why did you run the original led wiring back down the length of the truck bed instead of just running the led strips the opposite direction and having all that wire to run up into the cabin?
Thank you, and because the length of the bed led strips is to long for a 5 foot bed so if I would’ve done it the opposite way the ends of the wires coming out of the led stripped would’ve been exposed in the middle of the bed and would not look good at all so flipping it backwards allowed me to hide the wires if u have a 6 foot bed u don’t have to do it this way since these lights are for a 6 foot bed 👍 I hope that helps
Got it!
Keep up the good work jessee, truck looking amazing and this mod will sure be useful.
Thanks my friend :)!!! Trying my best
Looks awesome Jesse 👌👌
Thanks my friend 😎
Your video installation is done in detail very informative too.
Thank you
Jesse “go ahead and” Rizzo
🤙
Damn it. Now I can’t unhear it
That looks like a doorbell switch 👍
Lmfao true
Jesse! Well done vid/tutorial bro. It looks awesome. Keep up the good work!
Thanks my good friend :)!!
Do a video on tunel cover next! A good budget one. Cool videos!
I will look for one thanks 👍
do you need a bigger battery amp wise? cause with all those lights would hate to go out to truck and it not start or something. awesome video as always
No should be fine I’m not ever really running the lights and the times that Iam I have the car on, thanks Tim :)!
Wonderful video
Thank you :)!!
Like i said........ always bringing awesome new content.. keep it up 🤙🏼🤙🏼
Thanks man :)!!! I Appreciate it 🤙
That look so good bro! Great video!👊🏻
Thank you :)!!
You should modify this mod to wire up to the cargo light switch. Would be informational for me......uh I mean everyone.
Thanks for the idea 👍
Nice install brother why didn’t you put your switch in the bed of the truck ?
i didnt know how waterproof that switch would be
Hi Jesse!!! Wow!!!! I love how it looks at night yessss!!!! I got my snacks so I’m ready for this video lololol!!! I agree it’s not that hard adding or extending the wire because I’ve seen that done before!!! I love how you explain each process of the wiring and splicing!!! Gotta you don’t tape together but separately!!! That’s cool using the wiring cover!!! Black with black and red with the red!!! I definitely agree after all the hard work you don’t want water getting on the wires!!! I loved how you use a clothes hanger!!! Ooh that’s what you did with the harness!!! I love the repetitive of you saying not to tape the wires together and will cause a shortage!!! Sometimes you got to because will do exactly the opposite of what you said not to do!!! Lolol!!! I stayed the end of course to see the difference!!! The LED lights are definitely on point Jesse!!! You are soo talented!!!! I loved your video!!!!! Xoxo Pam 💝💖💖💗
Lol thank you so much Pam :)!!!this defenitly was a little longer to install lol
I have a question, can you connect it to the rear lights so they light up when you turn your headlights on? also maybe add a on/off switch on the wire next to the led lights so you have the option of driving with it on or off
I wouldn’t doubt it I’ve seen a similar install like that before just you will have to do some splicing I didn’t really want to cut into the wires lol but I’m sure u can 👍
You should have poke it thru the gromet .... Up to the insulation sleeve ....then pop the gromet back into the body cavity hole. Then silicone around the gromet wire hole.
I held off on that for now I’m actually doing a cb install on my truck ;) so that hole ima use to run that wire as well I was going to use silicone once that install is done but great thinking my friend :)!!! Thanks for the tip
Couldnt I just plug into the factory wiring underneath the dummy caps for the OEM lighting? That way it’s controlled by the factory door switch and also the bed light switch on the dash.
technically yes you can
Awesome
Thank you :)
This should be title how not to wire..... speaker wire I mean yeah it works but let’s be real use the proper primary wire..... second why cut the connectors off and not use them. I can’t understand why people constant cut them off and never use them, the proper why would have been cut off the connector leave a good 2 inches or so added your wire then use the connector for it’s intended purpose. Third a coat hanger coke on use something that won’t cause damage use a ac and heater 6 foot cable tie. They don’t damage anything and are flexible that they don’t need much room to get thru. Fourth why not use the cavities in the bed to run the wire properly I mean all you have to do is look for where the factory harness goes.fifth runs wire thru a hole that has an edge then sticks the grommet over it pinching the wires... you could have just gone thru the hole in the fire wall again it’s there for a reason. 6th it’s low voltage why are you running it from the battery you could have research and connected it to the pin out on the junction box for a factory look and power. Better yet you could have short cutted and use a add a fuse and connected to the fuse box again not need to run anything from the battery...
It’s wiring like this that provides me job security when a car catches fire
Hey, Jesse, I meant to ask... What are you using for a phone mount in your Taco? Thanks!
Paul Casserly hey my friend I’m useing the proclip USA phone mount and so far I love the thing it’s a bit on the bulky side but it’s solid here’s a link to the install video i did if u want to check it out ua-cam.com/video/bAy2DIYRbIg/v-deo.html
Thanks bro!
Nice info and advice bro Like 13👍👌
Thank you
Very interesant video
Thank you!!
Jesse “As You Can See” Rizo
😂
Jesse Rizo Haha, keep up the quality content, brother.
You can cut off the extra LEDs. There are lines on the strip on where you can cut.
Awesome tfs!!!
Thanks!!
Hi Jesse, terrific job, thanks for sharing this interesting vid...have a fantastic week, my friend 😊
Thanks for watching Ernest
Good video bro I enjoyed it 😌😌😌
Thanks bro :)
Sick video bro!
Thanks bro!!! :)
I was wondering how your gonna get that wire in the truck without drilling a hole. Great job!
Lol :) yea I try and stay away from drilling 😬
Looks good when lite, however I would have used the appropriate connectors and wire. You could have flipped the led strips to avoid running the wire back under the trim. A little to long for me looks good though!
As these are for a 6 and up foot bed you can’t or else it’ll expose a gang of wire :/ lol I tried it off camera and it looked bad, and true about the connectors I still havnt had any problems and it’s been months since I installed them lol thank you :)!!
That's awesome
Thank you :)!!!
That looks really nice too many wires for me bud lol! Love the idea will probably look for something a little smaller. Any chance they have a OEM style switch for that? I thought that was going to be your third switch for the Cali Raised panel unless I missed what it was
It’s pretty bright I tried it out last night and last week on our camping trip lol but yea I agree it is to many wires 😂, no I wish they did I’d have to get one from Cali raised and no I havnt put nothing on it I actually have another light bar for it I just havnt had the time to do it lol
Dawg just use an add a fuse to tap the existing bed light switch and it will function when the doors open or switched on, etc
Looks bad ass
Thank you 😎!!!
Jesse “let’s go ahead and” make a video of the switch getting cut off and hooking on a rocker switch👍 your video helped me out big time with installing mine you made everything “super simple” lol just don’t like the switch look
Lol u got it my friend
Thanks for watching :)!
Jesse Rizo thankyou bro! Love your tacoma and all the mods it’s super sick! Keep up the videos mah man!
lot's of go ahead and's.......great video though
Cool
Thanks
some brands you can just clip off the extra leds. Not sure if thats all brands.
Not sure about using speaker wire for doing electrical work. Seems sketchy.
James Carballo true but getting the correct gauge wire you should be good just not as clean of a install
I can to the comments specifically to see if anyone else also noticed the speaker wire for electrical work lol!
@@JesseRizo you're right though. it'll look cleaner but as long as the gauge is good you'll be fine.
@@510ozy Thats how we do it in the hood. Speaker wire ftw.
😱 Think about what you are saying!
Nice upload!
Keep it up
Thank you!!
jesse, could you connect the led power to the fuse box instead of battery? this would alleviate the need for inline fuse. also, i think you would not have a wire shortage if you reverse the led strip?
Looks great!
Question: Couldn’t you put the lights in backwards, instead of tucking in the wires underneath the bed cover & back towards the cabin of the truck just have the tips of the lights toward the back? Or did I miss something?
Yes u can the only reason I didn’t was because I didn’t want the two wires to be exposed right in the middle of the truck the way I did it everything is tucked in but yes u can do it that way you would just have to be careful when u use ur bed that u don’t get something caught in those wires
Great vid...just a bit of constructive criticism. Work on your "up talking". Look it up if you aren't familiar with the term. Almost every phrase you spoke had uptalking.
Other than that...good job.
Thank you!! Believe me I appreciate constructive cristism thank you and yes I know what it is I’ve been told I do it once in a while it’s a bad habit
Nice video was that speaker wire u used to extend?
Easy and simple, Dope video bro... hey what kinda extra wire did you use?
I just got 16 gauge speaker wire it’s a little thicker then what the wireing from the actual harness is but it works well and I havnt had a issue with it 👌 hope that helps my friend and I got the wire from amazon.com
He meant to say "Strip" not splice the black and red wires.
How about installing a switch to the tailgate that will work exactly the same as your side door. When you open the tailgate the light will turn on...
U could do that it literally is not hard at all,
As for this install just was the basic way....
Just so ya know, led strip lighting has cut points, you dont need to run it long.
Look at his wiring that’s all you need to know.....
2 yrs later but, couldn't you have tucked some of the lights under the rail covers so you didn't have to have that extra on the back? Just a thought.
I purchased these bed lights too and as well a OEM bed light switch do you know of how to properly wire after cutting the factory switch?
Yea I just did it for a friend of mine the only down side is with these specific lights they don’t have a wire to make the light on the switch light up atleast I couldn’t figure it out I tried different ways but as far as turning on and off the bed lights u can make it happen it’s possible
Speaker wire and no solder/heat shrink? The very least, marine grade butt connectors. Sorry, im very detailed when it comes to wiring. Good video overall.
I mentioned it in the video threw out the whole video to do ether or I kept stating make sure u solder or use the butt connectors 👍 the only reason I didn’t was because wanted to put out a video for u guys and didn’t have those on hand lol, thanks my friend
Hey jesse , just wondering can you change the switch that come on the kit with cali raised oem style switch ? just wondering please let me know thanks bro .
raneth lampa Pretty easy to do. Like i said, super simple.
Sang Tran yes i get that installation proces , but im asking if i can change switch that come on the kit with cali raised oem style switch? Thanks
@@ranethlampa I was being serious. LOL The cali-raised oem style, mic tuning, and ch4x4 switches are all the same in regards to hooking them up to any accessory. I run a few myself to keep the oem look. You have 4 wires; ground, illumination, power, and trigger.
Yea my whole dash setup is all cali raised it makes it look more stock
Hey my friend you should be able to run it I havnt done it on this exact wire harness but I do have videos on when I wired cali raised switches to auxbeam wire harnesses so if u want u can watch those videos as reference just scroll threw my older videos and watch “how to wire a cali raised switch to a auxbeam wire harness” , u can get some ideas from that one eventually ima do it to this harnessbonly because I like the stock look I don’t like the switch that auxbeam provides lol
And don't let the connections become wet.
Did you not try to connect it to bed lights?
Hey Jesse, i am doing the same installation to my truck. I am wondering the extra wiring you have, what gauge is it?
Hey my friend and I believe it was a 16 gauge
@@JesseRizo thanks bro. Keep up the great work your taco looking great!
“like I said” x1000.
Hey man is there any conflict between these lights on the battery and a dashcam fuse tapping?
I don’t wanna lie I’m not sure but it shouldn’t?
What year Tacoma do you got?
2018 Toyota Tacoma trd off road my friend
Hi, is this compatible with a retractable tonneau cover? Thanks in advance
I’m pretty sure my friend just might be a little more harder to install since u gotta get the wires threw the bed but u should be able to
Please do not splice wires like this. Crimp connectors are so cheap and easy to use and make secure connections when done properly. Twisting wires together like that will loosen up over time. If you're going to splice stranded wire like that, do a lineman's splice and apply solder
Do u know if the switch is waterproof?
Can U cut the LED strip to fit ...?
I've never seen an LED strip you can't cut. A lot of them have actual marks that show you where you can cut them.
What if there are 4 wires
"You're gonna go ahead and"
Doesn't the 2018 Toyota Tacoma TRD Off Road already have lights on the bed?
No :/ I wish it the only lighting back there is the one on the top middle 3rd brake light but if u have a camp tent like mine or if you have a bed cover or a camper that light is useless in those distractions since it’ll cover it at night but would be nice if they came with some stock lol
@@JesseRizo That crazy cause I have a switch next to the DRL that lights up the middle brake (white led) lights and two lights inside the bed next the outlet. One on each side. I would like to take pic of them and send it to you
You might be right 🤔 I probably never noticed it I apologize if I am wrong, yes please show me my email is jesserizoyt@gmail.comim curious now lol
Dude your extra wire you purchased is speaker wire. soon it will fail
Sorry Bro, but using speaker wire is not a good choice for this type of application.
This video is the definition of sloppy work and not thinking out the layout first, and DO NOT USE his method of connecting wires (just twisting and taping wires is a fire waiting to happen). Also that extra wire he's using is speaker wire and isn't rated to be out in the elements like that even with that type of loom covering.