[REVIEW] 3-D Printed Banned Blasters Gears Kriss Vector and Quik (OFD Flycore Nerf Blasters)
Вставка
- Опубліковано 11 лип 2024
- Today we take a look at two
Old Fusion Design Flycore blasters.
First is a Kriss Vector replica from Gears, and second is the Quik from Old Fusion Design. Both of these Nerf blasters are 3-D printed, full auto, rocking Banned Blasters Banshee flywheels.
Check out the video to see how you could create your own design around the OFD Flycore. And as always let me know your thoughts in the comments.
As an Amazon Influencer, I earn from qualifying purchases. If you use an Amazon affiliate link I earn a commission. That ultimately helps this channel at no extra charge to you. Your support is greatly appreciated.
OFD Flycore - www.printables.com/@OFDOldFus...
github.com/oldfieldadamg
Gears Vector - www.etsy.com/listing/14639052...
Quik - www.etsy.com/listing/12578836...
Hardware used:
M3 screws - amzn.to/3TfE1av
Brass inserts - amzn.to/3uYYdDq
Silicon wire - amzn.to/47PILbv
Thumb screw - amzn.to/3RC0gX9 
Electronic parts - outofdarts.com/collections/el...
Kelly Industries Quik Hardware Kit - kellyindustries.us/collection...
Banned Blasters Flywheels - bannedblasters.com/products/b...
Motors - bannedblasters.com/products/b...
OOD Kraken motors - outofdarts.com/products/ood-k...
Angle Talon Mags - outofdarts.com/products/worke...
Worker darts - outofdarts.com/products/worke...
3-D Filament:
Blue - proto-pasta.com/collections/a...
Orange - amzn.to/3RLmgit
Gray - shop.fillamentum.com/en-us/pr...
Pink/blue - www.3djake.com/3djake/magicpl...
SUBSCRIBE HERE: / naptownnerf
[Please follow me on the platforms below]
My Instagram: / naptownnerf
My Facebook page: / naptownnerfmods
NAPTOWN NERF MERCH!!! Check it out! teespring.com/stores/naptown-...
Time codes:
0:00 - intro
1:31 - OFD Flycore overview
6:02 - Gears Vector
11:47 - Blaster internals
13:30 - Blaster chronograph testing
17:36 - Final thoughts
#nerf #review #3dprinted - Розваги
![[REVIEW] Lynx by Orion Blasters | POWERHOUSE Half-Length Dart Launcher!](http://i.ytimg.com/vi/vI6POY5y3WQ/mqdefault.jpg)
![[REVIEW] Lynx by Orion Blasters | POWERHOUSE Half-Length Dart Launcher!](/img/tr.png)
I really want to build that Kriss Vector. It just looks totally sick! I got to play with a ValTek one and I was very impressed with it.
Definitely a fun build
I've been begging everyone to build me a vector for a while now 😂😂 everyone's too busy
Gotta love the classic criss-vector design, and I must've missed reviews of the quik cause this is the first one I've seen of it. I love the front profile on it though.
Great review, man!
Both blasters are so cool. I’d be stoked to have either.
I'd choose the Quik myself, but that's cause I want more pistols.
Though you mentioned that motor selection won't make a big difference, it may actually explain the lower shots out of Vector here even if most shots were squarely around 180. Both blasters have similar barrel lengths, but even though Krakens (on paper) should spin the flywheels fast enough to get 200 FPS, this is a much slimmer margin than the 42ks. Since a higher ROF will slow your flywheels down more, you'd likely lose a bit of velocity when firing long bursts or mag dumps. It probably won't be super noticeable because of the advancements we've made in wheel and motor specs, and there are definitely other cheaper options you can pick over BB's own motors that will get to a similar RPM range (mostly Worker's motors).
Either way, great to see you posting on these! Never mind on being late to the party, it's good that you've been able to get active with content again in the first place.
I would agree with this. It did seem like the BB 42's were a bit better, but would be best to test this with the exact same blaster and semi auto. Thanks for the comment.
@@NaptownNerf I think it should be fine on semi for most people, even if I'm personally a bit more picky. Do note that these wheels max out at 190 FPS with Worker HE instead (though that's no big issue IMO, it adds headroom for stricter FPS caps and HEs are heavier than DZ's stuff anyways so they keep their velocity a bit better.
Oh wow it has been a while I missed this channel
The Vector is sweet. 🔥🔥🔥🔥
I would definitely like to eventually build one of the KV's but who knows when i'll get around to that.
Sounds familiar
This looks great, as I am a fan of the vector aesthetically, but couldn't they have mounted the flywheel cage vertically with a slight modification? I think it would match with the vector's profile better and since the vector already fires from the bottom of the rectangle on the front, it would just make it more accurate to the real one. Great blasters and great video, just questions.
also i can see that the cage is perpendicular to the magazine well but i think you could print the cage vertically maybe
Go check out some pictures of the flycore. Without essentially rebuilding the front half of the flycore
Because it uses the Flycore system the flywheels have to be horizontal. There isn't a version with vertical fly wheels at this time. That being said, you could used very small flywheels and it wouldn't be nearly as noticeable. It would just get a less performance.
is there very many blaster groups in indiana? you are the first person i seen on here who is also from indiana. im up north in grant county
There are a few. My wife and I run a club here in Indianapolis called Naptown Nerf Club. We have games once a month during the warmer months at a local park. You can check us out on Facebook.
Is this full-auto only then?
yes
I like the Vector better
Not to sound crazy but wasn't this on the news or something?
that what i thought it was but no it was a glock with a kit that looks like a nerf gun
@@terigonUSAS12 yeah, exactly