I'm Back In THE 1 STACK MACK...Till I Get A FLAT!
Вставка
- Опубліковано 29 лют 2024
- Another day another couple flat tires, but things could always be worse!
Thanks for ride along!
Visit us online diesellife.com
Subscribe @Diesellifeclothing
Subscribe @OFFFishing
#video #vlog #viral #trending #trucking #work #power #diesellife #construction #automobile #truck - Авто та транспорт
I would be telling customers to either shovel off the track frame or hose it off before the equipment gets picked up or charge them for it, would be cheaper to pay a worker to shovel/broom off the machines
Going to point out something I keep noticing… buckle up brother! I’ve worked way too many crashes that people would survive if they buckled up… truckers included. Like someone else mentioned I’d definitely make them wash or sweep things off or charge them more. It’s simple for them to do this. As always I love seeing your videos… watched a few so far after finding your channel today. I love how you show everything and have a very positive outlook and a love for good hard work.
Drill more than one hole to make sure to have adequate drainage. I just smiled watching the end of this 😂
Very good video thank you for sharing
Hey buddy just did same finger mash. Next time try a paper clip heat it up and then just push it through the nail Very quick and almost painless.
Another day, another dollar. Some days are just like that. That is one hell of a trailer !!
Have you seen the tyre sealant that tyre fitters put in earthmoving equipment that seals up slow leaks??? That might help if you get slow leak/flat tyres regularly
Those Mack/Volvo engines are notorious for injector cup issues. Volvo has revised the cups, tools, and procedures for installing those cups. The issue with loosing prime isn't likely due to injector cups, mechanics are quick to jumping to the conclusion of injector cups because they are such a common problem.
Hell of a day at sea captain
Thanks brother 👊
you should build a air hose that hooks to the red line on your trucks
i might be time to get an air line that hooks to your glad hand and fill your tires. they sell kits to make your own too.
if thats a newer Mack with an MP7/8 engine and you have a hard start again, take a look inside the fuel tanks while the engine is running. If you see a lot of bubbles in the tank the the injector cups are bad and you'll have to replace the injectors and cups. The bubbles will be there because of combustion gasses leaking past the injector/injector cup seal and getting into the fuel galley and returning to the tanks. A good mechanic can knock them out plus a valve adjustment in 6 hours.
Some days are like that ,but it could be worse Brother, and I have done the same on my fingers, you will have that on them big jobs, keep the hammer down Brother 👊
Now u know how Fred Flintstone felt with a throbbing thumb. LOL!!!!
I done that slot in my time mind hitting with hammer we're I carpenter 😅 I done many times to left tum I can't believe I till have nail😮😢😅
1 stack flat top mack!!
Have a good weekend
You too buddy 👊
@@Diesellifeclothing Thank you
Better repaint that nail, kills me 🤣every time I see the colors.
If I go pick up a machine and the tracks aren’t cleaned, or the buckets are laying all over the job, millheads not strapped in skiddy buckets, water in the mill, loader buckets not on forks, hammers left on the machine, etc etc etc…. I call my transportation manger let him know and I leave it there until the idiots pack it up the right way. I don’t play those games anymore, no one has time for that.
Operators job to clean tracks out ,we only knock loose stuff off l tell them I've not got a hand shovel licence 😅
should cary a airline and a gauge
You need a long hose to hook up to your gladhand to fill up your trailer and truck tires out in the boommings
I’ve got one now finally
@@chrisgabaldon6614 cool. It comes in handy when you need it and no truck stop around. That's great. Glad you got it.
Ouch
Lazy mans tiedown, no frame safety bar and no front frame tiedowns.
You drive around in a air compressor get a air hose with a glad hand so you won't have to make special stops over some air
I finally did thanks for the advice it’s always welcome on this channel I’m just wondering why it took me so long to buy one lol😂
This video must have been recorded before you purchased the Pete !
It was👊
Iv drilled a few holes in my nails, Feels so good, Doesn’t it?
It’s that odd sort of feel good lol
That's alcohol abuse rt there olson
How do I find your merchandise
Diesellife.com
Where is the new Pete at
Getting a ceramic coating
wheres the peterbilt been????
We’re bouncing back-and-forth between some previous content and newer content but at the moment the Peterbilt is getting a ceramic coat which takes about four days and then it Hass to go back to rush truck centers to get some warranty work done. It’ll be back soon.
@@chrisgabaldon6614 ahhh ok. loving the content
It’s only flat on the bottom 🫣 stay safe out there …. 🤓