САМЫЙ ДУРНОЙ СПОСОБ ОБТОЧИВАНИЯ НОЖНИЦ. СОВСЕМ ИСПОРТИЛ НОЖНИЦУ. НОЖНИЦЫ ОБТАЧИВАЕТСЯ ТОЛЬКО С ОДНОЙ СТОРОНЫ ТО ЕСТЬ С НАРУЖНОЙ СТОРОНЫ ЛЕЗВИЙ ВНУТРЬ НЕ ДВХСТОРОННО И НЕ С ТАКИМИ ГРУБЫМИ КРУПНОЗЕРНИСТЫМИ ДИСКАМИ.👌
correct, only the inclined side (or the outward sides) of the cutting edge should be sharpened, other way the two blades won't contact properly with each other
great ideas, i wouldn't use my bare fingers to hold metal objects i was drilling, saw too many tuff guys doing this and ended up with severe cuts or even a detached finger, especially the bottle cap hack. not a disser, but some hacks would be easier to go out and buy dollar tree item, but hey, it's fun tinkering, i do that too>
19.15 you can use a piece of the blade of a cutter and not to spoil a pencil sharpener... by the way, you have not show how fixed the blade, gluing it or what, and not many clothes pegs have that flat points
24.30 stick and adhere first well the paper to the blade or the etching will probably become blurred... unless that's what you are artistically looking for
siempre se aprende algo, aunque sólo sea hacerlo de otro modo, siempre puedes recordar buenas ideas o encontrar otras nuevas, esta es la regla de oro del inventor: siempre suele haber un modo mejor de hacer las cosas que como se hacen
Amesome Ideas, continue
Amazing 🎉
Nice work ❤❤❤❤❤❤
28.40 you made that cut on purpose, you savage! ha ha
Nice Vid!👏🏻✅🧡
САМЫЙ ДУРНОЙ СПОСОБ ОБТОЧИВАНИЯ НОЖНИЦ.
СОВСЕМ ИСПОРТИЛ НОЖНИЦУ. НОЖНИЦЫ ОБТАЧИВАЕТСЯ ТОЛЬКО С ОДНОЙ СТОРОНЫ ТО ЕСТЬ С НАРУЖНОЙ СТОРОНЫ ЛЕЗВИЙ ВНУТРЬ НЕ ДВХСТОРОННО И НЕ С ТАКИМИ ГРУБЫМИ КРУПНОЗЕРНИСТЫМИ ДИСКАМИ.👌
correct, only the inclined side (or the outward sides) of the cutting edge should be sharpened, other way the two blades won't contact properly with each other
Ok thank you 👍❤❤
Досмотрела до конца с интересом и удовольствием! Кое-что взяла себе на заметку! Спасибо!
Я знал что есть ещё такие 😂
21.20 or well, do the grooves on the round head of a screw and use it as a burr, though your way looks more precise
What is the black stuff he is sandpapéing
probably a charcoal from his barbecue... or maybe a ruined piece of meat ha ha
majstori za sirotinju - požar u najavi...
great ideas, i wouldn't use my bare fingers to hold metal objects i was drilling, saw too many tuff guys doing this and ended up with severe cuts or even a detached finger, especially the bottle cap hack. not a disser, but some hacks would be easier to go out and buy dollar tree item, but hey, it's fun tinkering, i do that too>
La mezcla es con polvo de carbón y el líquido que lo endurece como se llama gracias
16.05 good idea, but remember not to do it with the tin wire
👍👍👍👍👍👍👍
Вершина идиотизма или пособие как НЕ надо делать.....
4.20 don't forget to insert previously the heat shrink or you'll turn mad ha ha
Если так точить ножницы, то руки растут из задницы.!!!.
19.15 you can use a piece of the blade of a cutter and not to spoil a pencil sharpener... by the way, you have not show how fixed the blade, gluing it or what, and not many clothes pegs have that flat points
28.20 annoyng excessive precision for hanging them
15.15 approximately ha ha
0.30 you are adding cyanoacrylate glue, and i guess almost every powder is suitable for this
What is that liquid?
OK❤😊
22.55 don't mutilate the other bird, man
28.55 much better a copper tube
24.30 stick and adhere first well the paper to the blade or the etching will probably become blurred... unless that's what you are artistically looking for
Waris
7.40 or just try with a lump of foil, we know from (6.15) you have it at home
Щайтан совсем😂
Снотворное видео
Скачивают друг от друга и выкидывают в Ютуб, надоело смотреть одно и тоже!
не смотри
siempre se aprende algo, aunque sólo sea hacerlo de otro modo, siempre puedes recordar buenas ideas o encontrar otras nuevas, esta es la regla de oro del inventor: siempre suele haber un modo mejor de hacer las cosas que como se hacen
Another Billy Bodge video.