Wow. You, sir, are a magician. It was wonderful to watch that valve body taking form, and with each step so diligently described. Thank you for providing such excellent educational content.
I’d consider myself a pretty good drafter went to a trade school and all that but it’s always interesting to see how other people approach a drawing. Great job explaining everything as well
That dimension is unbounded. Just to keep that line outside of the body to perform Revolve-Cut feature. There can be done Revolve-Boss feature instead.
@@saivamsipakkurthi It's simple, the radius of the inscribed circle of the hexagon at 17:34. But in fact it should be 24.25 according to the drawing itself.
Имеется несколько неточностей. Во-первых чертеж. В который раз вижу, что бы вершины шестигранника были рабочими размерами. Это размер ДЛЯ СПРАВОК! Определяющий размер - это размер "под ключ". Вершины получатся сами по себе, после обработки под ключ. Судя по размерам там должен быть размер 50 мм, что по ГОСТ, что по DIN 691. А не 48,5 мм. Во-вторых. Посадочные поверхности под клапан так не делают. Делается кольцевой выступ и обрабатывается только верх выступа. Есть еще понятие - технология. Вот как они потом эту модель будут изготавливать? Вот разберите реальный вентиль и посмотрите, как это выглядит, и увидите, что там не так, как моделируете.
Any laptop with at least i5 core CPU and 8 GB ram will enable you to smoothly run solidworks...it will hang in i3 or 4gb ram and rendering will also take time so 8 GB ram+ i5 core is the best combo
It just looks nice occasionally you’ll want to made a drawing for Customers who are not familiar with thread notations or maybe to put it in like an owners manual there’s no real need other than to help convey what it is to someone who doesn’t look at drawings
Wow. You, sir, are a magician. It was wonderful to watch that valve body taking form, and with each step so diligently described. Thank you for providing such excellent educational content.
You are the best teacher in the world sir g......I always watch your tutorial sir and get knowledge about the command.... thankyou....
I wish SolidWorks differentiated between fillets/chamfers and weld lines as well as some kind of texture or indicator to show if a part was casted
Thanks! wonderful SOLIDWORKS instructing videos! 😎
Excellent effert , please keep this momentum
I’d consider myself a pretty good drafter went to a trade school and all that but it’s always interesting to see how other people approach a drawing. Great job explaining everything as well
Another good one. I really like drawing parts according to your videos.
Dear sir,
Your all videos are very inspirational for everyone.i learned everything from you.
Sir which version of solidworks you are using
Was it not possible to initially revolve boss to create the initial shape opposed to creating a cylinder then cutting it to create shape?
very good video thank you !
You are great sir.. I am your big fan
Very good tutorial, thanks and keep it up Sir.
Done! Thanks.
Excellent. Thanks
anyone knows where did he find that 15 dimension in 4:32 ?
That dimension is unbounded. Just to keep that line outside of the body to perform Revolve-Cut feature.
There can be done Revolve-Boss feature instead.
@@FJProject Can you be more clear?
@@mohamadkhatib8624 Well instead of doing a cylinder Extrude-Boss and then Revolve-Cut, there can be done one Revolve-Boss.
@@FJProject Could you also tell me why and how did he set the dimension to 24.5 from center line?
@@saivamsipakkurthi It's simple, the radius of the inscribed circle of the hexagon at 17:34. But in fact it should be 24.25 according to the drawing itself.
But sir what is the means of cosmetic threads....
Dear sir
What difference between tangent mate and perpendicular mate
Man u r great) Thank u for these videos)
Keep it up Sir 👍
Great sir.
Very good
Имеется несколько неточностей.
Во-первых чертеж. В который раз вижу, что бы вершины шестигранника были рабочими размерами. Это размер ДЛЯ СПРАВОК! Определяющий размер - это размер "под ключ". Вершины получатся сами по себе, после обработки под ключ. Судя по размерам там должен быть размер 50 мм, что по ГОСТ, что по DIN 691. А не 48,5 мм.
Во-вторых. Посадочные поверхности под клапан так не делают. Делается кольцевой выступ и обрабатывается только верх выступа. Есть еще понятие - технология. Вот как они потом эту модель будут изготавливать? Вот разберите реальный вентиль и посмотрите, как это выглядит, и увидите, что там не так, как моделируете.
Вы правы безусловно, но это всего лишь игрушка!
Muito bom. Excelente.
Sir ye globe valve hai na
sir , what is the specifications of laptop to use solidworks please suggest me i want to buy laptop
Any laptop with at least i5 core CPU and 8 GB ram will enable you to smoothly run solidworks...it will hang in i3 or 4gb ram and rendering will also take time so 8 GB ram+ i5 core is the best combo
Great
Thanks for sharing! ;-)
Can anyone please tell me the purpose of cosmetic thread? Because threads can be made without cosmetic thread. Why the need?
It just looks nice occasionally you’ll want to made a drawing for Customers who are not familiar with thread notations or maybe to put it in like an owners manual there’s no real need other than to help convey what it is to someone who doesn’t look at drawings
Sir pls autocad version pls
for a minute I was wondering why he was designing from his kitchen
Sir pla share this in Pinterest
👍🏼👍🏼👍🏼👍🏼👍🏼