Thx for the video and info ! I subscribed, so now you have another 😊. anyway , do I need clamps if my vanity only has one hole ? Also, I am purchasing a floor door stopper and will be needing to drill a hole into a tile floor , so do you think I can use this device for that as well? Thanks again !
Nice idea, although why not use a thinner piece of wood on the top side of the C clamp to prevent any damage.. I know you use the paper towel and it works… But having a piece of wood would improve, tightening, and not crack anything
Sorry 1 more question for ya.. I haven’t purchased the faucet I want yet , what if the pre-drilled hole in the vanity is too big ? Do you have a part or suggestion for that by any chance? Thx Renee
To prevent cracking I read that you can use some water to cool the area down, and also to only run the drill for 10 seconds at a time to give the area time to cool down
For those that don't know drip a little water here and there around the hole while cutting! HELPS WITH THE CUTTING AND SAVING YOUR BLADE AND TO PREVENT CRACKING AND BUSTING THE COUNTER OR VANITY!!!!!! THIS CLOWN HERE!...😒🤡
Why don’t they sell this diamond milling bits at Home Depot or Lowes??? I went to both stores and they don’t carry them. I also check northern tools and equipment and Ace Hardware and they also don’t carry them. That sucks!! You can only get it at Amazon!! Yikes!!! Why is this tool so unpopular to stock at any hardware store?? I don’t get it? 😮😮
Yep, just ran into this same damn problem. Disgusted with Home Depot for not selling compatible pieces.
Just what I needed to know. Thanks!
If the hole saw doesn't have a pilot bit, then you can drill through the wood first and place it on top like a template.
Great idea! Thanks for sharing.
Would be nice if the camera actually focused on the drill when making the hole..
You made my day! I'm so happy!)(!
Thx for the video and info ! I subscribed, so now you have another 😊. anyway , do I need clamps if my vanity only has one hole ? Also, I am purchasing a floor door stopper and will be needing to drill a hole into a tile floor , so do you think I can use this device for that as well?
Thanks again !
Nice idea, although why not use a thinner piece of wood on the top side of the C clamp to prevent any damage.. I know you use the paper towel and it works… But having a piece of wood would improve, tightening, and not crack anything
Camera! The focus....😂
Sorry 1 more question for ya.. I haven’t purchased the faucet I want yet , what if the pre-drilled hole in the vanity is too big ? Do you have a part or suggestion for that by any chance?
Thx
Renee
Why don't they make adapter kits.
I am so afraid I’m going to crack the ceramic.
To prevent cracking I read that you can use some water to cool the area down, and also to only run the drill for 10 seconds at a time to give the area time to cool down
For those that don't know drip a little water here and there around the hole while cutting!
HELPS WITH THE CUTTING AND SAVING YOUR BLADE AND TO PREVENT CRACKING AND BUSTING THE COUNTER OR VANITY!!!!!!
THIS CLOWN HERE!...😒🤡
Why don’t they sell this diamond milling bits at Home Depot or Lowes??? I went to both stores and they don’t carry them. I also check northern tools and equipment and Ace Hardware and they also don’t carry them. That sucks!! You can only get it at Amazon!! Yikes!!! Why is this tool so unpopular to stock at any hardware store?? I don’t get it? 😮😮