I built a similar one using the same parts but - F182(4) Pickle Toothpick frame (2022 edition) 3inch_digi_120mm_v1-1 -- you have to unsolder the motor connectors from the flight controller which is a real pain and solder the motor cables directly! The usb connector fits perfectly then - Vision40 Canopy for which you can get 3d printed from nozzle3d still looking for a proper battery mount, currently using rubber bands thanks for the inspiration
no i namówiłeś - odpalam swojego toothpicka ;)
👍 gumowych drzew życzę 🤩
I built a similar one using the same parts but
- F182(4) Pickle Toothpick frame (2022 edition) 3inch_digi_120mm_v1-1 -- you have to unsolder the motor connectors from the flight controller which is a real pain and solder the motor cables directly! The usb connector fits perfectly then
- Vision40 Canopy for which you can get 3d printed from nozzle3d
still looking for a proper battery mount, currently using rubber bands
thanks for the inspiration
Thanks🤩 I tried several 3D prints to mount the 1s battery, but the best one is a thick rubber strap. Check the 2s 3" build - it is the real deal!
1S a tak fajnie śmiga ;)
będzie wersja 2S, części już zamówione 😛