A tip to make the slot for the wire. Clamp the pieces together, mark your depth, and then drill. It would also be advisable to go down farther below the plug so when the cable is run out the back it isn't making a tight 90. And a last suggestion would be to attach the bottom with screws. That way if the cable dies, it can be replaced instead of having to make a whole new stand.
Joseph yeah I wondered about it too, i thought they may be for cooling the phone while in charge or you could slide a picture in there , it w'll be cool
For "Version 2.0", add a cooling fan to the back of the unit so that both phone and stand do not overheat! You may also wish to create an iPad version that builds a set of cooling fans AND a speaker system for all around sound. Just a thought du jour, yes?
great project, but the only thing that you shouldn't have done was gluing the charging cable in there. The only reason I even say that is because they wear out over time.
Y cuando la ficha del cargador tiene algún desperfecto por el desgaste del uso, que hacemos??? Hay que desasmar la estructura de madera..." Esta buena la idea pero en mi humilde opinión le veo esadificultad. Saludos
Это классика жанра:) Как думаете, а для чего выпилы сделаны? В теории если бы сделать их шире и боковины короче, то можно было бы телефон в горизонт ставить, но они узкие и туда разве что лист бумаги влезет.
That's a Carving bit, they make a lot of them, but looks to bet the Cylinder one. woodcarvingillustrated.com/blog/2017/10/23/choosing-power-carving-bits/
Hi! Nice, but do we have to watch the whole video before understanding what the product is? Some viewers will always think you are just showing off your equipment. It looks nice.
No. You can skip to the end and see it. That is what the video controls are for. By the way, you realize that he built most of his own big tools? Why do you not do the same and construct something, instead of putting the guy down. If you dont like it, dont watch it.
Most men have the hand tools. He built his big tools himself. Instead of being negative, why not do something useful, and make your own things, just as he has done.
думаю как для "показателя" хорший результат, в идеале можно было помимо выреза под динамик сделать ещё и с заду разьем что бы вдруг перелома кабеля просто заменить а не переделывать (например микроюсб маму с подставку и просто соединять отдельгным кабелем), та и заморочившись с одной схемкой.. залить торцы (там где автор сделал прорези) эбоксидкой с 2мя светодиодами зелёный и крастный, и сделать индикицию, тоесть телефон заряжается кушает более 450мА индикатор светится красным, телефон зарядился кушает мение 50мА индикатор переключился на зелёный, вот вот это был бы топ)) но данныое видео как показатель идеи очень хорош
I love these videos where there is no music and you can hear only the sounds of what you do, new subscriber!! Greetings from Argentina! 🇦🇷
Long press to edit & lock
Wish I have the tools and most importantly, your skills! Very elegant.
Good job 👍🇮🇩
That’s the way to store your phone in style!! Great job!
A tip to make the slot for the wire. Clamp the pieces together, mark your depth, and then drill. It would also be advisable to go down farther below the plug so when the cable is run out the back it isn't making a tight 90. And a last suggestion would be to attach the bottom with screws. That way if the cable dies, it can be replaced instead of having to make a whole new stand.
protips, especially the screw one
Good advice
Once you've drilled the hole, how do you get the cable in?
@@JAYRAY00 the pieces would just be clamped while you drill so they would come apart once you're all done
@@PsYkoTicxxRipZz ahh I see, I thought it was after clamping and gluing
My god so much work.. Just cut it out of a single block!!
Awesome work!
It's very good idea😁
Muy buen trabajo!!! Pero imagina que el cargador deja de funcionar... tendrías que romperlo todo porque está pegado con cola...no?
One slip or sneeze with that bandsaw and you'll resemble my 7th grade wood shop teacher Mr. Phlangeless
Good job .
Muito legal parabéns vc é criativa, ficou muito bom 👏👏👏👍❤
Nice work!
Soon will be a famous channel
Awesome work 👍👍👍
Very cool! Can you make one with removable charger cable?
Excelente vídeo, gracias
Nice!
Nice solid build, looks really slick once it's finished, what kind of wood did you use for this?
Kayu jati
@@jc-brawl9735 excellent I love to use real as well
@@MakerCuisine wait do you know what im commented about?
@@jc-brawl9735 I translated what it meant
Very nice
too good idea
Súper nice
Belo trabalho 👏👏👏👏👏
Bonne idée bien faite continuez bravo
muy practico y elegante
Ang galing nman 🔨
Why the slits in the side? Functional or just decorative?
Joseph looks like hardwood flooring
Joseph yeah I wondered about it too, i thought they may be for cooling the phone while in charge or you could slide a picture in there , it w'll be cool
I think it's for sound from the bottom firing speakers
Probably from sanding because he chipped one of the corners and didn't want to leave the blemish.
I'm wondering the same?
Really cool, thanks!
great video dom
Era bom um desse na horizontal, que aí a pessoa já assistia os vídeos de boa.
Maybe screws in the base to change the cable?
*The OG Pixel Stand.*
Cool vid!
Perfect!
Nice stand for smartphone.
nice
For "Version 2.0", add a cooling fan to the back of the unit so that both phone and stand do not overheat! You may also wish to create an iPad version that builds a set of cooling fans AND a speaker system for all around sound. Just a thought du jour, yes?
i would have made the back bit the same colour as the bottom for better contrast
great project, but the only thing that you shouldn't have done was gluing the charging cable in there. The only reason I even say that is because they wear out over time.
Y cuando la ficha del cargador tiene algún desperfecto por el desgaste del uso, que hacemos??? Hay que desasmar la estructura de madera..." Esta buena la idea pero en mi humilde opinión le veo esadificultad. Saludos
How did u get so fast with that file geez.
Top 👍👍👍
Пальчиком размазать клей. Это так по нашему 👌 😀
Это классика жанра:) Как думаете, а для чего выпилы сделаны? В теории если бы сделать их шире и боковины короче, то можно было бы телефон в горизонт ставить, но они узкие и туда разве что лист бумаги влезет.
🤘🏻👍👍👍
Watching this and hearing the dremel feels like I am at the dentist.
Nice idea..but for me I might use router tool embossed the whole shape of phone..
As much as I appreciate your video and work it's not DIY as most people do not have these type of tools
happy2be you can use other tools as a substitute
What type of wood is on the bottom?
What did he applied at the last part of the video?
sealer of some type.... Most people I see use linseed oil.
This is like ASMR...
Super
muy bonito.No vendes si te pidieran?
love it
which phone use in this dock station?
it's google pixel
That cable is gonna go bad really quickly if it stays at that angle
si le pones un ventilador de PC, para que no se caliente, te compro la idea
What is the bit you're using on your dremel called?
That's a Carving bit, they make a lot of them, but looks to bet the Cylinder one. woodcarvingillustrated.com/blog/2017/10/23/choosing-power-carving-bits/
Did not see the finish project enough
Nice
6:53 what u using here ?
darude sandstorm
3:16 how to make fire lmao
Hahaha hilarious!!!!! Be quiet
Скорее подставка, а не док-станция
2:05 5:29 U are not from the USA
I got the same ruler
2,16 на линейке, нержавеющая сталь.
👌👌🌹
👌
Cuando lo terminé se rompió mi iPhone y tuve que comprar Samsung.... no le quedó :'(
Чем он намазал её?!
Hi!
Nice, but do we have to watch the whole video before understanding what the product is? Some viewers will always think you are just showing off your equipment. It looks nice.
No. You can skip to the end and see it. That is what the video controls are for. By the way, you realize that he built most of his own big tools? Why do you not do the same and construct something, instead of putting the guy down. If you dont like it, dont watch it.
Can u add commentary so that everyone can understand?....
just say.....wow...
Amaizyn
Woodprix is a solid company with solid woodworking plans.
Not everyone has all these tools
Most men have the hand tools. He built his big tools himself. Instead of being negative, why not do something useful, and make your own things, just as he has done.
@@KennethNicholson1972and what if you just shut up your mouth instead of making false judgment
Use four screws in the base instead of glue. That way if the cable gets damaged it can easily be replaced.
Why so unnecessarily complicated ?
It isn't, it is a simple design. Maybe yours is better, lets see it?
If the cable get damage, boom. Destroy everything
Names the exposed cable can still get damaged dumbass
Micro grinding look like a dentist grinding kkkkkk
y cuando el cargador se dañe? nos reímos un rato ? xD
3:15 esas son limas para metal, las escofinas son para madera. Que mal uso le das a las herramientas
K
Остроумного!
Bonito no es la verdad
Pierwszy!
Que miedo llevarme los dedos 😑👉🔪😑😱😕
Good, but don't very good
Sell it to me 😂😂😂
Way to much time and work I’ll just buy one
All the expensive electric tools did it for you I am sorry
You should use a guide before you lose fingers but other than that kudos awesome project gonna try to make this myself
that's all I could think of while watching this
When you are expert you don't have too but What about the fact you can buy this crap for $2 bucks at dollar general.
@@mgtazco an expert would know that safety is always very important no matter how confident you are with power tools and blades
@@themaker4216 True words!
mgtazco We just like to make stuff.
Надо было под динамик сделать вырез!
думаю как для "показателя" хорший результат, в идеале можно было помимо выреза под динамик сделать ещё и с заду разьем что бы вдруг перелома кабеля просто заменить а не переделывать (например микроюсб маму с подставку и просто соединять отдельгным кабелем), та и заморочившись с одной схемкой.. залить торцы (там где автор сделал прорези) эбоксидкой с 2мя светодиодами зелёный и крастный, и сделать индикицию, тоесть телефон заряжается кушает более 450мА индикатор светится красным, телефон зарядился кушает мение 50мА индикатор переключился на зелёный, вот вот это был бы топ)) но данныое видео как показатель идеи очень хорош
nice