I think it's a very nice video. The explanations are extremely detailed and easy to understand. I would love to see the rest of the videos uploaded, and I would love to be directed to a paid course on Udemy, but it's too much for me, as I'm not good at English, to pay to learn it. I would really appreciate a continuation of this video.
Go to File > Export > ODB++. Follow the prompts to export your layout in the ODB++ format.Include BOM Information: During the export process, Allegro should provide options to include additional information such as the BOM. Make sure to select the option to include the BOM data.
I have doubt in Allegro I can't find orgin I followed all your procedure but the orgin is not showing. I tried another method in setup -change drawing orgin now I find orgin but I didn't achived the airgap correctly .pls tell how to fix it
Hi Pradeep, glad that I have come across this video. It’s interesting and beautifully presented. Do you have any course for the schematic to export to PCB design with Allegro Design entry HDL 17.2 or 17.4. Once the schematic is imported successfully to the PCB editor, the rest process or procedures are same I guess. But I am not getting any step by step tutorial or course for the PCB from the design entry HDL. Than you in advance for your valuable reply.
@@locnguyenvan1031 In PCB Editor, Go to setup - Design parameter - select Display tab - On the right side you will find Display enhancement mode - Check all boxes - Apply - OK and then check in the editor.
@@LtlBiTech I downloaded the orcad software from their website with 30 day trial and I am able to work in orcad capture cis but I cannot find the padstack software under the cadence utilities and i have checked it everywhere please please help me with that how can i find it. Thanks
Sir, can we route top layer component to the internal 3rd layer by a through via in 4 layer PCB ? or do we need specifically Blind via for that ? Sir pls reply, thanks.
@@shivmishra5031 That is also one of the bis type, that can be used to get the access from external to internal layers in higher end PCB and are costlier compare to through via.
@@LtlBiTech So sir in Allegro pcb design we can route from any layer to any layer by through via , I used to thought that it can route or connect only top to bottom layer strictly . But now I can route between any layer of 4Layer or 6 layers PCB by through via. We dont need to add blind via or burried via for that , we can do that by only through via . Right sir ? Sorry if i am taking your so much time , but i dont have any-other source other then you . Thankyou sir 🙏
Best tutorial , thanks for this sir . I have one question, how to change the routing angle of auto route mode ? It always route the PCB at 90 degrees but I want it to do at 45 degrees . How to do this sir ?
Make sure all footprints are attached to the schematic. Run Electrical and Physical DRC and maintain zero errors and warning. If there are any errors, kindly address those and rectify. Make sure the netlist is created without any issues. If the import failed, please check the log file for exact errors. Understand the errors and solve. Then import again.
Sir ,is it necessary to make the plane gnd ? Can’t we just route the components according to the rats or schematic without making gnd to any of the plane ?
Hi Sir, I had enrolled your course on Udemy.Thanks for guiding me through your course. I just want know that if I want to learn more about orcad then how should I go ahead. Thanks
Thank you for enrollment. Wish you all the best for you learning journey. Stay connected on udemy for latest classes and upcoming course and also on our UA-cam channel. You can also keep in touch with us for further learning. The link is: pradeip009.wixsite.com/pcb-design
Hi sir after saw this video I bought your Udemy Cadence Allegro/ OrCAD course yesterday.I went through the videos in the course.I can't get the free trail version in both OrCAD and Allegro software when I attempt to click the Try now button " your access has failed because this service is not available in your region.If you think this a mistake or would like to request accommodations,please contact us individually " - I got response like I am struck here.Please help me sir.
Great video! Thanks for providing detailed explanations
Thank you 🙏
Super sir...good for getting knowledge 😊😊😊
If u want to learn pcb design I can teach u
Thank you 🙏
Very nice, please continue
Thank you so much
I think it's a very nice video. The explanations are extremely detailed and easy to understand. I would love to see the rest of the videos uploaded, and I would love to be directed to a paid course on Udemy, but it's too much for me, as I'm not good at English, to pay to learn it. I would really appreciate a continuation of this video.
Surely we will work on it
Detailed Explanation, Very Useful. Thank You
@@ChandruRevan Thank you
Sir Can i Get the 4 Layer Stack up Sample Board.
@@ChandruRevan Yes I will share the downloadable link
and also Share Your Contact Details sir
@@LtlBiTech Hi Sir
Sir Can i Get the 4 Layer Stack up Sample Board.
Hello sir
Can u please solve problem ,how we can export any drawing to odb++ with bom information?
Go to File > Export > ODB++. Follow the prompts to export your layout in the ODB++ format.Include BOM Information: During the export process, Allegro should provide options to include additional information such as the BOM. Make sure to select the option to include the BOM data.
I have doubt in Allegro I can't find orgin I followed all your procedure but the orgin is not showing. I tried another method in setup -change drawing orgin now I find orgin but I didn't achived the airgap correctly .pls tell how to fix it
Hi Pradeep, glad that I have come across this video. It’s interesting and beautifully presented. Do you have any course for the schematic to export to PCB design with Allegro Design entry HDL 17.2 or 17.4. Once the schematic is imported successfully to the PCB editor, the rest process or procedures are same I guess. But I am not getting any step by step tutorial or course for the PCB from the design entry HDL. Than you in advance for your valuable reply.
This video very useful for me. I have got more knowledge than Institute
@@Navya-sz4lx Thank you
Hi Sir,
Thank for your video, it is really great,
please help me, how to fix the origi point is hidden in PCB editor to make footprint? thanks
@@locnguyenvan1031 In PCB Editor, Go to setup - Design parameter - select Display tab - On the right side you will find Display enhancement mode - Check all boxes - Apply - OK and then check in the editor.
Hi sir
How to get templates for 2,4 layer boards in this software?
I don’t have the pcb editor of allegro I have downloaded the student version of Orcad can you guide me
I have a doubt: for smd footprint which pad shape we use and for through hole which pad shape use
It is fix or by choice.
Can you please clear me?
Please follow the land pattern from the data sheet.
great effort, thank you very much
@@afsalm1611 Thank you
Hello brother. I want to install cadence allegro where to install can u please tell me
?
Kindly share your email id
@@gaggijain6661 please share email id
@@LtlBiTech I downloaded the orcad software from their website with 30 day trial and I am able to work in orcad capture cis but I cannot find the padstack software under the cadence utilities and i have checked it everywhere please please help me with that how can i find it. Thanks
There is some error i am not able to add email
I've added the email in the edit comment above please check that
Sir, can we route top layer component to the internal 3rd layer by a through via in 4 layer PCB ? or do we need specifically Blind via for that ? Sir pls reply, thanks.
You can route using through via.
@@LtlBiTech then sir what is the need of blind via ? Thankyou for your response.
@@shivmishra5031 That is also one of the bis type, that can be used to get the access from external to internal layers in higher end PCB and are costlier compare to through via.
@@LtlBiTech So sir in Allegro pcb design we can route from any layer to any layer by through via , I used to thought that it can route or connect only top to bottom layer strictly . But now I can route between any layer of 4Layer or 6 layers PCB by through via. We dont need to add blind via or burried via for that , we can do that by only through via . Right sir ?
Sorry if i am taking your so much time , but i dont have any-other source other then you . Thankyou sir 🙏
Sir can you explain how to install and set up orcad and allegro
@@Aisha-vs8vd Please download from link given in the description. And follow ream me file for proper installation.
Is orcad software is free
Best tutorial , thanks for this sir .
I have one question, how to change the routing angle of auto route mode ? It always route the PCB at 90 degrees but I want it to do at 45 degrees . How to do this sir ?
Note: Prefer manual routing instead autoroute.
While doing auto route, choose option for diagonal routing.
@@LtlBiTech okay sir , thankyou .
While import to board i have got errors what should i do
Make sure all footprints are attached to the schematic.
Run Electrical and Physical DRC and maintain zero errors and warning. If there are any errors, kindly address those and rectify.
Make sure the netlist is created without any issues.
If the import failed, please check the log file for exact errors. Understand the errors and solve. Then import again.
great course, on which software the initial presentation is carried out ?
@@satyammali3331 ppt
Sir ,is it necessary to make the plane gnd ? Can’t we just route the components according to the rats or schematic without making gnd to any of the plane ?
You can do. But planing have more advantages than routing.
@@LtlBiTech ok sir . Sir are you planning to upload video for 4 layers pcb design ?
@@shivmishra5031 We are working on it. It will take some time.
Hello sir ji can you plz let me know what are the basic things and from where to start if any person i preparing for electronic eng
Are you preparing for interview or Wanted to join Engineering?
How to download software
Plz full explain.
@@SanketDas-kd5um Please check the description
Super sir
Thank you 🙏
Can you teach altium also
@@kunamamalovebird2779 Currently No
sir from where can i download orcad Allegro 17.4 ver pls tell
Visit their portal to check the latest updates. DM your mail id.
@@sakshamaggarwal8616 share me your e mail id
@@LtlBiTech sir my id is in previous comment
I don't find it
@@LtlBiTech sir i commented my id in the community 800 subs post
Good video
Thanks
can you help me how to download software
@@erukullaharshavardhan6198 There is a link in the description. Please check.
Sir ofline es course ko kaise kare
@@aroyengineer8789 Reach out to our website.
Sir in udemy course will you teach high speed design?
@@Navya-sz4lx It is designed to teach from basic to expert level. We are updating high speed design classes in near future.
Hello sir.. Today i bought your udemy course of pcb design but am troubling to install software so please help me out sir
How do join that
The link is given in the description. Please check in the description. Please refer the read me file.
@@LtlBiTech I want study high speed layout
More than 10 layers
@@thangarajk5798 To learn high speed design, please do contact on pradeip009.wixsite.com/pcb-design
@@LtlBiTech I have already 4 year's experience in design
can we get certificate
@@prajwalmk9556 For UA-cam you may not get certificate. You will get certificate if you enroll from udemy course.
How to buy your udemy cource?
Check the description
Sir which version of orcad is best while learning
Any version is fine
Hi Sir,
I had enrolled your course on Udemy.Thanks for guiding me through your course.
I just want know that if I want to learn more about orcad then how should I go ahead.
Thanks
Thank you for enrollment. Wish you all the best for you learning journey.
Stay connected on udemy for latest classes and upcoming course and also on our UA-cam channel.
You can also keep in touch with us for further learning.
The link is: pradeip009.wixsite.com/pcb-design
UA-cam allows easy closed captions - l use it for Vietnamese.
After buying udemy course again we need to buy software...?
@@LtlBiTech
I joined in udemy course but i have some doubts can you please clear me?
@@Navya-sz4lx Yes please...
Hi sir after saw this video I bought your Udemy Cadence Allegro/ OrCAD course yesterday.I went through the videos in the course.I can't get the free trail version in both OrCAD and Allegro software when I attempt to click the Try now button " your access has failed because this service is not available in your region.If you think this a mistake or would like to request accommodations,please contact us individually " - I got response like I am struck here.Please help me sir.
@@dinesh_b In udemy course, refer an article from section 2.
Please reply sir
@@dinesh_b Refer an article from section 2 on udemy course...
@@LtlBiTech ok sir
Nice
@@praveenv.k5052 Thank you so much
@@LtlBiTech Sir please send link to download
@@rakesh_varshan Please check the description.
@@rakesh_varshan Please check the link in the description.
@@LtlBiTech yeah found it thanks... is this supports on 4GB ram 64bit os Windows 10 laptop
thanks you
Thank you 🙏
sir sorry to say this in last routing part u went really fast i dint understand much
ENGLISH WOULD BE NICE & CLOSED CAPTIONING USEFUL TOO.
Thank you 🙏
is orcad software free
No. Please check with the vendor portal for pricing.
Yes for students
Free trail provided by cadence
Pk
Would be interesting if it was Altium
@@GoodWill-s8j If any possibility, we will work on creating videos in Altium in future.
dislike, for deleting my comments
No comments were deleted manually. I think UA-cam may hold or deleted inappropriate comments as a part of its policies.