DIY Air Cooler! w/Tubular Radiator! High Airflow! New Design! DIY AC Air Conditioner 12v can b solar
Вставка
- Опубліковано 9 лют 2025
- DIY Air Cooler! DIY AC Air Conditioner! New Design! w/Long Tubular Radiator. High speed and Powerful. Cools for hours at a time. can be AC or DC powered. low power draw (about 45 watts). works excellent. can be solar or battery powered, if desired. video shows lots of temp readings and close-ups. be ready for summer! the "how to make it" part is shown at about the halfway mark of the video. output air temps in an 80F (27C) room averaged 54F (12C). air speed averaged 33 mph (53 km/h). please share around with everyone you know... any questions, just drop in the comments and i'll get to them shortly.
couple of unique things about it...
1.) the ice chest is not damaged in any way (it stays in 'like new' condition) so you can use it like a regular ice chest any time you want to.
2.) the entire blower/tube assembly comes off the top so you can carry it around and use it with any other water source that you like.
3.) it's the strongest DIY AC i've ever made (the most efficient too). two gallons of ice produced cold air for over 3 hours.
4.) also, has the fastest air speed by far of any Air cooler i've ever made. shoots the air all the way across the room.
I grew up in the 60's and 70's with "swamp" coolers and I love your dry cooling devices. Thanx.
hi and thank you! yes, this type of air cooler is a 'dry' cooling device (dry meaning it's not an evap cooler). i guess you could call it an ice based phase-change cooling machine. adds no humidity to the air.
@@desertsun02 👍
LOVE it! It’d sure help the elderly who don’t have AC to keep cool dangerously hot days. And so affordable!
yes, i agree! i was super amazed at how long the gallons last too. just a few of those frozen overnight or whenever and you're go to go for many hours.
@@desertsun02 as long as there’s freezer access for water jugs it would help some, at least during the hottest part of the day.
I only have a tiny freezer and it’s a choice between water jugs or food.
I am making one for my mom's house in SW Florida her power bill was $450 + last month. Her social security is not going to handle that.
Wondering if a cooler that is for car that you keep plugged in to stay cool, would keep gal jugs frozen overnight? Would be helpful for elderly mom not getting up.
@@trishoakley6730 Did you say $450 power bill for a single month?
That's crazy expensive.
And a small company is making a free energy 5kw generator for just under $5,000. I thought it was expensive
I can't express how excited I get when the notification comes across my phone that you posted a new video. It's ALWAYS something cool and useful.
hi and thank you! i always try to post useful and practical stuff. also stuff that is easy to make.
@hurlrules1 hi there. the controllers come and go but you can use lots of different controllers. it doesn't have to be the same one. amazon has dozens of choices. just make sure that 12v is within its range. i think the range of the one i used is 7v to 40v). also make sure that it handles the amps. the one i used handles up to 10 amps. the unit pulls 4 amps or less at most so the controller handles it with ease 🙂
I would like to thank you for posting the video on the swamp cooler with the transmission cooler. I built it exactly as you described, and I use it in my RV. It works fantastically. Thank you so much.
hi there. i'm glad you made it and it's working good for you! that's what it's all about 👍🙂 .....just a quick note for clarity: a swamp cooler is something totally different. that term is just another name for an 'evaporative air cooler'. those air coolers use water-soaked pads (but no ice). the ice-based air coolers are 'phase change' air coolers. {as ice melts (or as it changes phase from a solid to a liquid) the heat is literally pulled out of the air}. (melting ice absorbs heat). the biggest advantage of the ice-based units is that they are 'non evaporative' meaning they don't add any humidity to the air (they just cool it down).
this is honestly the best version of the chest freezer ive seen, thank you! the idea for the tranmission oil cooler is genius
thank you! 👍
I was actually wondering when you'll upload new video and here you are. Thank you for that.
you bet. this one was a long time in the making (nearly 9 months total). i went back and forth as to the best way to make the tube. it worked out great.
Nice, thanx I'm working on a ac unit for my 5×5 grow tent you have given me lot's of options 😀
Brilliant! Simple and practical. Thank you for sharing your genius with us!
hi and thank you! this one was a long time in the making. it's probably the best (most efficient) overall ice cooler i've made. it's not the cheapest one to make but it's worth it.
Wow! Awesome project! So well thought out. Congrats!!
hi and thanks tom!
Hello sir, I wanted say thank you so much for sharing this idea on youtube. I'm a fanatic when it comes to staying cool and I am paranoid about getting hot while sleeping during the summer. This is exactly the kind of design I've been trying to figure out to go with and I'm going to go with a 24 inch transmission cooler to take it to the extreme. I really like the design you made here, and it will definitely serve as a foundation for some extra ideas I have. Before discovering your video, I was contemplating on getting a 20x20-in aluminum radiator for a car and slapping it behind a 20 inch box fan, but I actually really like the idea of using a blower motor with the aluminum cooler like this. Again, thank you so much for brainstorming this idea up for DIY folks like myself to incorporate at home. It gets miserably hot and the summer here in arizona, and a cooler like this is exactly what I need to keep the edge off while trying to sleep. Look forward to seeing your other ideas!
David
Great design, and it looks like it's very powerful. We shared this video on our homemade tools forum this week 😎
totally awesome! thanks for sharing it! that's the main way people discover the videos these days (by people sharing them). yes, this one really has some power. it's possibly the best one i've made. certainly has the highest wind speed and is probably the most efficient overall.
You know I was loooking forward to this video!!
I love your great ideas! 😉👍💗
hi and thank you very much!
thanks for sharing your build, I built one changed a few things used a 4 inch dryer hose instead of making my own tunnel and I added a small piece of wood to lift the front up slightly, I think honestly this is the best build I’ve seen and simplest, Great job Man!
hi and you're welcome! i thought about using a 4 inch dryer hose or 4" piece of PVC pipe but was afraid that too much air would pass too far from the fins to effectively cool it down. i'm glad it's working for you though! if you ever want to try and get the temps down even further consider making the 3.5" pipe (like the one in the video). super easy to do and it keeps all the air even closer to the cold fins. btw - i'm just finishing up a similar build that i think is honestly the best one that i've ever made. it even beats this one (by a little). it came out fantastic! it's got a built-in air filter, a built-in radiator and a fully adjustable (360 degree) air outlet (so you can blow the air exactly where you want it without moving the ice chest. breeze is 15 to 20 mph and it runs quiet. it's all 12v too! total power draw is just 3 amps (36 watts total). i just got 4 hours of cooling using two ice jugs and 2 blue ice packs. (with 80F/27C ambient air temp). i'm in the process of editing the video and will post shortly. note: that unit uses similar components to this unit so you can convert this unit to that unit with just a few tweaks (if you wanted too).
Cannot wait...please forward. 👏👏👏
@@desertsun02is there a video for this new one yet?
I think this is the better option for me because in a camper van in Australia i don’t want to add moisture in the van like the air over the ice options out there.
I did think the only changes id make and id love your thoughts, was to add a stainless steel reservoir inside the cooler using antifreeze in the lines so it can go colder than freezing and hopefully keep the ice frozen longer.
Parts list would be great 😊
i'll get one together. in the meantime though, the parts list is basically in the video. only thing not specifically shown is the transmission oil cooler. that one is a flashpoint cooler. 12" model. amazon has it. they also have some less expensive ones that i just noticed recently. those may work just as good. if you have any specific questions about any parts let me know. unit has been working great. i hope a lot of people make it. it's not the cheapest air cooler i've made but it's powerful, very versatile and works great.
Cooler milk jugs hoses water pump fan foil maybe a 12 pack of bud lite oh and a power source
Another great idea! Now all you have to do is keep those ice blocks from melting!
I stack ice packs in mine, and just enough water to cover the water pump.
Love your video's! Cant find the tubular oil cooler, only flat ones. A parts list would be so cool. I would love to build this. 😊😊😊
hi. since it just takes a few things to make it, i incorporated the parts list into the video but i did notice that the specs of the radiator are not shown. if you search for 'flashpower transmission oil cooler' on amazon you'll see them. i used the 12' one. make sure to get the 'double pass' one. they sell other brands too. i just noticed one on amazon that is 6 dollars cheaper and looks about the same, so there are options.
I have a love-hate thing going on with the parts list thing. I love it when it's listed very specifically exactly what you used and especially with the links but did you know that every single time you link a product like that, it immediately sells out, frequently never to return. Like I said, love-hate. Keep them coming tho.
hi. i also try to take close up shots of things like the boxes that the main parts came in (the blower motor box with model number and the coolers label are shown). all other things are miscellaneous items (very easy to source). sold at home depot and walmart etc... if anyone has any specific questions about an item, feel free to ask. the cooler is from walmart. tubing from home depot, i'm not sure where i got the foil. the stainless mesh is from amazon. wood is scrap wood (probably from home depot originally). pump is from amazon (any 150 or 200 gph water pump should work). i think that covers it. i hope lots of people make it. it's one of the best air coolers i've ever made. took 9 months in total to design it, experiment with it, and build/film/edit it.
@@desertsun02 thank you so much!
Any recommendations or links for the transmission tube?
hi. best way to find it is to search for flashpower transmission oil cooler' on amazon. it comes right up. okay, i'm being lazy. i'll look for the link. this is it 🙂 (note i did see cheaper ones) but this is the one i used www.amazon.com/Aluminum-Finned-Transmission-Coolers-Dual/dp/B0714LM6ST/ref=sr_1_1?crid=13D64IONJL1L2&keywords=flashpower+transmission+oil+cooler&qid=1684953833&sprefix=flashpower+transmission+oil+cooler%2Caps%2C334&sr=8-1
Hey check this out, if you go with the 4 inch sea flow inline, The 4 inch sewer pipe makes a perfect tube! Im using a heat gun to make flat spot for the cooler and the inline with a gasket locks into the flanged side of the sewer pipe for a nice snug fit! you now have a perfect wind tunnel thats way more efficient and sturdy and just a clean look. Im going to also do mine closed loop and use antifreeze with a flat transmission cooler that fits the bottom of a cooler. then water and crushed ice on that then layer of cubes and then dry ice and then blocks over that inside one of those yeti type coolers but walmart has some that are way cheaper but have same performance and USA made.. You have really inspired me on this because I do a lot of camping and stuff like that and I had something close to this but it was ugly and bulky. but trust me on the closed loop two radiator system it really runs so much better because the water friction isnt being exposed to the ice. I know it sounds weird but running water produces heat but when closed away the heat is way less. when the ice melts around the dry ice it seals and acts as a pressure vessel and the CO2 forces into the ice and doesnt dissolve as fast in fact wrap it in paperbage tight as you can then get it wet and it really seals it up. Thanks again for the long transmission cooler idea I didnt think those existed. I should have known but thats life take care
How did it work !!! Im looking at doing the closed loop system aswell with the two trans coolers ! The biggest benefit I also see is it introducing hot air into the cooler itself.
@@delagto_5340 works as it should and blasts cold air. the better the cooler the longer it lasts adding some dry ice wrapped in brown paper and it really lasts
The oil cooler as the heat exchanger is an excellent choice - it makes it very DIY friendly. Can you use some flexible duct pipe (like you used for the silencer) around the heat exchanger to guide the air over it rather than the wire mesh construction? I wonder too if you could pre cool the air with an evaporative (swamp) cooler to reduce the ice consumption? The air flow is already there as is the pump and piping...tap into that water and pipe the water to a suitable media perhaps?
Great project and thank you very much for sharing the information, where can I get a tubular radiator like that from ???
hi. amazon has them. i bought it last year but they still have them. same price too.
Wow‼️👏🏼🥰
that sums it up 👍😎
Thank you for sharing all your great ideas…
I live where it is very hot and very humid. How would you deal with all the condensation that the transmission cooler would create?
hi. any condensation will just drop to the bottom of the tube. over time a few drops might run out. i'd say just put a folded paper towel at the end of tube to catch it. (a small sponge might work too)
Just remember that all the heat you remove from the room with this air conditioner is heat you previously added by freezing the water (and then some, since the freezer isn't 100% efficient). This isn't that bad necessarily, since some of that time will be during the cool night / early morning. I still think a window AC unit is probably a better choice for most people / situations.
Window air conditioner uses a ton of power. South Florida we are paying 400-800 month depending on your house size in electrical bills.
Aren't you doing the same with a window unit? Aren't you, in a way, transferring the heat from the room to the outside? Don't window units also blow air across some sort of a radiator filled with a much cooler substance, albeit one that was cooled after spending 50,000 tons of CO2 emissions compressing the substance to make it cold? I'm not an engineer so maybe I just need to stay in my lane.
Pretty sure folks are already operating their freezers so making ice doesn't add entropy, it just uses the existing entropy more efficiently.
@@MissBforBella Of course it does. Think about it; why does a freezer compressor ever run? It's to extract heat out, until the compartment reaches a given target temperature (-10 deg C or whatever). There are two sources of heat: Adding warm stuff into the freezer, and leakage due to imperfect insulation. If you add something warm (water), it will warm up the compartment. At this point, the compressor starts running until its able to bring it back to its target temperature. The more warm stuff you add into the freezer, the longer it takes. In this case, you're only going to reach equilibrium when the water is frozen.
I think you missed the point here, this is a portable AC that runs on a 12-volt Supply, it can be used anywhere, in a tent in a mountain house that only has heat and is not normally used in the summer, I don't think he's doing it to compare it to a Shaker unit
Great video!! I'm going to build one. What are you using to power the SeaFlo fan? What is converting it from DC to AC? I thought I saw two power cords in the video-- one for the submersible pump, and one for ???. Do you have an unseen power inverter in this build? When using the optional speed controller, are you using a DC to AC speed controller? Thank you for the great posts.
i'm using a Roypow AC to DC transformer to power the seaflo fan. fan draws 2.5 amps so i'd use a transformer rated 5 amps or more. amazon sells lots of the ac to dc transformers. i was using one rated 15 amps but it doesn't need to be that strong. you could use a 12v battery or a 12v solar panel to power it if you wanted to. the speed controller is just a 12v one. the one i used can handle up to 10 amps. amazon has lots of those too.
I think my son could build this for me - thank-you!
hi. you bet! it's easy to build. he should have no trouble. if you have any questions on how to build it - just drop them in the comments area 🙂
Great stuff. What is total cost ? How long before you lose cooling and have to replace ice ?
I would almost say just sacrifice the cooler (I have the same one like 20 years old now lol) and drill to holes for the hoses to go thru and keep the lit shut
Nice! How would you compare this with your flat transmission coolers you invented last year?
hi. they are both super good (but this one can run a lot faster (and stay totally cool) because the tube is so long. the air travels 12" to 13" down a supercooled tube and that 1 foot length cools the air fully even when the air is moving at 35+ mph. it also works well with an ice chest and mounts/unmounts easily to the top.
Thanks for the quick reply! Do you have a recommendation for a good 12v submersible pump? What gph should I look for?Blessings.
i often use 160 to 200 gph (but if it's strong pump, you can use one as little as a 63gph one). i'd say go for one about 160 gph. the one i use is working great. amazon has lots.
I have Solar. And in the hot summer days no power in the night to have 1,7kw run 8 hours. I plan to build a Tent in what I sleep (with enough air) and place one or two of these coolers inside. That way you could sleep cool for pennies while everyone is going nuts :()
hi. i'm not sure if you mean a 'bed tent' but those are cool. they would keep the cool air right around you. you could run it slower and extend the ice 2x or even 3x
you should flip the fan so air can get sucked through the heat exchange and and a bendable tube on the empty side so you can face it in whatever direction without opening the cooler.
Love watching your videos. Having fun brainstorming how to cool a high rise dorm room through occasional heat waves. Small room has two mini-fridge/freezers to make ice, but I thinking I’m fighting against the laws of physics. Not an engineer, but I think running the freezers to refreeze ice will heat the room up more than I’m able to cool it. Can’t run an evap cooler out the 16th floor window. Any ideas for apartment dwellers in enclosed spaces. Would be happy just to cool for 6-8 hours over night for sleeping. Day time can be spent in cooled public spaces.
what dc motor speed controller do you recommend? the one in your vids unavailable. thanks for you vids i have already built your heavy duty air cooler and this one im building next.
Would you say this cooling tube was more effectint at cooling the air within the house than the traditonal radiortor style that you used in previous builds?
Amazon link to the aluminum fend cylindrical heat sink
hi. well they have several. let me see if i can find the one i bought. (i got it about a year ago). this looks like the one www.amazon.com/Aluminum-Finned-Transmission-Coolers-Single/dp/B0714LM6ST/ref=sr_1_1?crid=3K6Y5ULAGXOGE&keywords=flashpower%2B12%22&qid=1684626226&sprefix=flashpower%2B12%2B%2Caps%2C1102&sr=8-1&th=1
@@desertsun02 Please pin this and the fan you used as the top comments. Thank you!!
Grand idea. Thank you. Any way to make it more quiet?
hi. you can slow the motor with speed controller or use a section of 3" dryer hose on other end (as a muffler) both shown in vid. dryer hose acts as a muffler. honestly though, it's not very loud. no louder than a box fan. i've fallen asleep next to it several times. it's a very powerful motor so it will never be super-quiet (if you run it full speed)
@@desertsun02 thank you for your response. Cheers.
Awesome ❤🙏🌈👍
I’m doing the same thing but am using a small fridge/ freezer combo instead of an ice cooler. It should all be able to run on solar. That way no ice to mess with.
Do you set the temp just over freezing so the pump doesn’t freeze?
I did the same thing. Smaller freezer fridge runs off battery or outlet. Filled with frozen water bottles. Set on below freezing the water returning has some heat. This helps keep the unit right above freezing. Used insulated vent tube over radiator 4 inch with solid connectors and c clamps helps with fan noise. 180 pump, for fan - convertor with fuse battery to outlet, fan added toggle on/off, speed dial, male cigarette plug. Modified fridge/freezer unit with drilled holes used boat thru-hull connectors to least amount of hose in open air reduces condensation on hoses dripping. Also reduces loss of cold air in freezer/cooler unit with running to recover temp stay cooler. I built 3 of these cools most of my mom's house here in South Florida without adding humidity to the area. Frozen water bottles keep about 4 days. You can add some alcohol to water and the freeze point is lower. Let the pump run to really cool the radiator before turning on the fan. Whole build running less than 100 watts, moveable on dolly, 3 outlet plugs on power strip all tie strapped less clutter plugged into 200 watt jackery on one to 200 watt panel runs free during day. These are stationary so built according. Fans are noise but you can sound deadening foam and wrap muffle it out.
@@michaeldina1103 add alcohol to the water not a ton freezing point is lower.
@@trishoakley6730I’d really like to know more and in layman’s terms for someone like myself to be able to understand easily. We did this build here but would like other types and it sounds like you’ve accomplished that but need some more easier to understand instructions! Thank you kindly!!!
Hi. I have a Chevy express conversion van and I was hoping for some advice from the community. The space is about 5’x5’x9’, and I was wondering what would be the best size for radiator + fan?
I saw they sell three 4 inch fans with a 15”x4” radiator, all in one unit. Is that way too small for the space?
And I’d love to have 5-6 hours of cold air.
The van is well insulated.
Thank you so much and any advice is very much appreciated!!!
Great DIY ! Is ther a net savings ( or gain ) ?
thank you much. i have actually been working on this idea for about 9 months. i got stumped on the 'tube design' for a while and then about 2 months ago just made my own tube. most store bought tubes are too small or too big or not solid enough.
Hi sir good job I like my question is evp in side complete hol or piping plz explain thanks
i'm sorry i don't understand the question?
I wonder just how cold this could get if you put one of the oil coolers under water in the ice chest and another oil cooler outside as shown?
Bro, I'm here for the creativity, and you do that well. But it would be way cooler if you used wind/solar/geothermal power. This thing is just an A/C with extra steps. The kitchen freezer did all the real work.
hi there. unfortunately, wind and geothermal are not viable options for me. not much wind and the ground out here is hard as a rock. i do show this unit running on a solar panel, so that is an option. i have 2 or 3 videos on how to make ice off grid and with solar panels. so you could combine this with that. remember that this is only 45 watts and runs off grid. even smallest AC unit is 500 to 900 watts and is AC powered. fridge does the work for the ice but it works out great.
What length transmission cooler did you use? And can you use a DC setup with a rechargeable battery from a drill?
hi. i used a 12" transmission cooler. you could probably use a battery from a drill 👍.
Looks very good! Which size oil cooler 12 or 15" did you use to get those results?
hi and thanks. it's officially the 12" size. (measures about 13" though).
Always love these creative thermal transfer techniques.
If you were using this to cool a large area would it not be better to get the longer 30" tubular radiator?
hi. possibly, but that might be 'oversized' unless you use a bigger ice chest too
Is this for sale? Uf so how much is it and how much would it cost to ship to southern California?
hi. i don't sell them, i just show how to make.
I am curious why you chose to have the blower exhausting towards the lines vs flipping it around so that its pushing air passed the radiator any reason or just choice?
i'm not sure i understand your question. there's no room to put the fan on the other side (where the tubes are) because they would get in the way of the fan. or am i mis-reading the question?
@@desertsun02 I built one similar to this. What I did was flip the blower around so I could connect "duct" to it. That allowed me to direct the air flow in different directions or in my case split the air output in 2 directions
Where does the condensate go? If you’re in a humid environment.
hi. it can form on the radiator tube if the humidity is high but it just lands in the bottom of the tube. if you have a lot of condensate a few drops might run out. i'd just place a paper towel at one end of tube to catch that if needed.
Hi can you please post links to buy the fan and radiator. Thanks!
This?
*What do you think it would require to build a cooler ac that can blow cold air to cool down a van in 90 degrees for at least 8-10 hours?*
hi. several of my DIY air coolers can cool down a van. the main thing is having a source of cold water (or ice). if you've got lower humidity then i'd say look into my DIY evap coolers. those things would cool a van sized area in 2 minutes (and you don't need ice or cold water!). they actually chill down the water as they cool the air.
Do you have the part # by chance?
hi. il'll look it up. here is the manufacturer part number 181041-D00
i paid $42.00 on amazon but i've recently noticed they have similar ones for as little as $26.00. here is a link to the one i used tinyurl.com/3fau3zcf
any condensation from the radiator that I need to account for?
hi. i don't generally have the condensation issue where i live but if you do it will just drip down into the tube. if any runs out you could just wipe it away with a paper towel (or fold a paper towel and place it near the end of the tube)
Maybe a dumb question, but why not "Pull" the air instead of push it? Could I flip the blower's direction and add a tube to add more direction?
Its not a dumb question. There's actually no difference, for this application anyway.
How can I go from a 110 outlet to the 12 volt bilge blower? What type of transformer can I use. I cant find one anywhere around here. Home depot, walmart, west marine is where I got the blower from but they dont have a 110 to 12v transformer. Can you recommend one to me?
hi. sure. amazon has tons them. dozens and dozens. the one i use is a RoyPow 12v 15a one. the unit only draws about 3 to 4 amps total so i would say to buy one that it at least 6 to 8a. that's so it doesn't run at capacity. or get the RoyPow one. i have had it for many years.
@@desertsun02 Awesome! Thank you very much. I love your show. You are a genius when it comes to DIY.
Is it cheaper to use second-hand server cooling fans? For example: LENOVO HOT SWAP FAN (SF17A11910) / FRU P/N:00HV048
Hi sir can i have a 1 radiator from your video with your signature?
Where do you even getba radiator like that
hi. that radiator is from amazon. it's a flashpower transmission oil cooler. make sure to buy a 'double pass' one. a 'single pass' won't work (because it's got tubes on both ends).
I wonder how long itll last in a car? I live in my suv currently and wanted to by an IcyBreeze but I'm not spending 300 bucks. I can build this for $50 and be happy
yes, it's much cheaper to build it yourself.
Idles like a 2 stroke!
The humidity has to be very low otherwise how do you deal with water droplets due to condensation?
hi. there may be a little condensation (but much of it will actually re-evaporate with all that wind blowing across it) so you will never notice it. if any does form it will just be a few droplets - so no biggie. the tube itself is stainless steel mesh and thick tin foil so that works well too
I think install sump drain below it and let it drain inside the cooler box is easy option
@E One interesting idea, i think people will find that there is very few noticeable droplets. shouldn't be an issue. just slip a paper towel under the end of the tube if needed. that would soak up any. that way you can keep the ice chest in new condition.
@@desertsun02 it was because of my past failed experiment. My country has very high humidity and hot weather, so the water got pool up in no time
@E One i'd just try the paper towel near end of tube if needed. it should work good. i've lived in super muggy places too. i'm glad i got out of there. drier is better imo
Awfully loud...are there quieter options?
hi. that's just the cameras microphone. it makes it sound louder than it is. it just sounds like a strong fan running when you're in the room. i've fallen asleep to it twice already. nice smooth sound. you can always add a speed controller switch to it if you want to (one shown in video) or the 'muffler' (also shown). best way to think of it is if you don't mind the sound of a box fan then you won't mind the sound of this.🙂
I can see a heater application using thermosyphon.
@Goodness same as, yet with hot water.
How much to make me one?
hi. i just show how to make, but i don't sell them
I use my AC for allergen filtration as much as cooling. I wonder how much more energy I would need to blow air through a filter.
you could install a 'cut to fit' filter on the back end of the blower pretty easy. i almost did that with this but didn't want to overcomplicate the project. i don't think you would need any more energy. the breeze may be slowed a little but it wouldn't matter. the thing really moves a lot of air.
What’s the secret to keeping the ice from melting so quickly?
freezing in milk jugs obviously
dry ice on the bottom with thin cardboard to insulate it would extend the life
I am going to try it in cooler that plugs into car cigg lighter that stays cold like a fridge. You see them in RVs, van builds etc
hi. if you add the optional speed controller and run the fan slower, the ice will last even longer. or freeze 4 gallon jugs and you may get 6 or even 8 hours. i got close to 4 hours before it really started getting warmer.
This thing looks like a life support machine you’d see in an emergency room.
Great idea! This goes in a house, right? What would I need to make it work in my 1970 Chevelle until my vintage air kit arrives???
hi, yep it goes right in your house (or your car). the fan is 12v so all you need is a 12v pump and then you can plug those into the 12v power socket (cigarette lighter) in the car
Could you do a video on how to build my own radiator semi like this tube one
i do have a video or two on how to build a radiator (but not a tubular one). i'll look into making one.
Why don't you try this
Hey,
Hope you're doing well! Been loving your channel lately. I'm diving into a DIY project to beat the scorching Atlanta heat this summer - I'm building my own A/C or chilled air cooler setup. I've got a few questions about batteries and airflow that I hope you can help me with.
Here's what I'm planning:
Coleman 316 Series cooler with wheels (17.3"D x 36.9"W x 18"H)
EVIL ENERGY 5/16" Transmission Oil Cooler - a 4 Pass Tube and Fin Cooler Kit in Universal Aluminium Black
Two SEAFLO 4" Electric In-Line Marine Bilge Air Blowers - they're 12V, 270 CFM, and super quiet for my boat-inspired cooling system
A DC 12V Solar Water Heater Circulating Pump with DC Power Adapter - it's high-temperature resistant and has a lift of 4M and a flow rate of 10LPM (2.64GPM)
(Still deciding on this one)
FITNATE 12 Pipe Aluminum Heat Exchanger Radiator - it's for a PC CPU CO2 laser water cool system, but I'm repurposing it for my project. It's 10.62 inches long.
Each motor fan is rated at 12 volts and draws 6.0A. I plan to run both fans for 8-10 hours.
I'm considering using a 18650 12V 150Ah lithium battery to power everything, but I'd love your feedback before I commit.
Thanks a bunch!
Someone should start a contest on best way to cool a small hot room. Maybe a $$$ price for incentive. Surely something cool ;-) will result!
Question so this can be specifically made for you car correct ? And do you suppose it will still be able to run for 3 hours straight hooked up to the smoke adapter ? Asking for my husband
hi. yep you should be able to run this using a cars 12v power port. how long the ice will last will depend on how much ice you use, how big the blocks are and how hot the ambient air is. if you have plenty of ice you could run it 24/7.
Lol grandma's boy at grandma's house.