I have 2 friends from Penjab living here in Los Angelous . All 3 of us come to learn your brain for 3 dYs. You are better that my CCNA instructor , Virgil . Chenga my friend
I thought a dns would be harder to make cause I thought we have to put a cname and a forward and reversed lookupzone... turns out its really easy to set all that stuff up in the packet tracer... wow
Sir so so do you offer a config to a similar client ? I would travel to you , but hotel for a weekend . You teach me and others I know want to take same situation . You are a master with Internet engineering .
Thank you so much for this presentation. But i uave a question. Assuming you internet to nat to the private ip that reside on the server . What command wilk you use in the cisco router .
Hi, See if you have private ip in Lan site and Want sat public ip then you need to configuration NAT. It is simple You can what app ur our team will support you. Thanks
@@daniabh-xx8kh I did this, still failed for me Edit: I was dumb, “left side” meant the f0/1 interface is where the command “ip helper-address [ip address of dhcp server]” needed to be issued. If anyone is still having issues, you can make the router itself be a dhcp server for those range of addresses by issuing these commands from global config mode “ip dhcp excluded-address [default gateway address]” “ip dhcp pool [name of your choice]” “network [network address] [subnet]” “default-router [default gateway address]” For this video: Default gateway = 192.168.1.1 Network address = 192.168.1.0 Subnet = 255.255.255.0
I am having the exact same problem, I have checked everything to make sure I have not made any mistakes with configuration, I am not sure why the left hand side does not work and I get the same issue I have also checked the packets it does not show much I can do. I am new to packet tracer and in IT field so trying to build my networking knowledge please find out why this is a issue and the IP helper command doesn't bring the IP for the PCs on the left.
Router(config)#ip dhcp pool lan Router(dhcp-config)#network 192.168.1.0 255.255.255.0 Router(dhcp-config)#default-router 192.168.1.1 Router(dhcp-config)#dns-server 192.168.2.3 Router(dhcp-config)#exit Router(config)#exit Router# %SYS-5-CONFIG_I: Configured from console by console Router#conf Configuring from terminal, memory, or network [terminal]? Enter configuration commands, one per line. End with CNTL/Z. Router(config)#dhcp pool lan2 ^ % Invalid input detected at '^' marker.
this is amazing. please dont delete your channel, i will watch the ccna playlist after this semester
Hi,
OK sure.
Thanks
You have explained the DNS part very well, the tutorial itself is really nice. Thanks!
Glad you liked it
Ваша робота завжди вражає своєю унікальністю та креативністю. Це відео - ще один яскравий доказ вашої майстерності. Дякую за незабутні враження!
Hi,
Thanks 👍
I have 2 friends from Penjab living here in Los Angelous . All 3 of us come to learn your brain for 3 dYs. You are better that my CCNA instructor , Virgil . Chenga my friend
Hi,
How we can help you.
Thanks
Don't call them Lassi I repeat Don't😁
finally i understand the dhcp server .... Thank you
Great.
Thanks
The explanation was on point ...💯Thank you
👍
You are exactly what I needed. I can finally understand my classes. Thank you so much❤
👍
Thanks for the clear instructions, it really helped me see how it works.
👍
May gods bless you and your family bro!! You have helped me understand a lot of things in cisco packet tracer ♥
Thank 👍
I apprecaite your insightful practice, and effort that has been made to provide this video
👍
Wonderful, been pulling my hair out. Thanks.
Wonderful!
Thanks for the session, great knowledge
👍
thanks! you saved my day
👍
Excelente contenido y muy buena explicación 😊 Gracias 🙏
Thanks. This video was easy to understand
👍
Thanks bro. Good job and very helpful 👏
👍
I thought a dns would be harder to make cause I thought we have to put a cname and a forward and reversed lookupzone... turns out its really easy to set all that stuff up in the packet tracer... wow
👍
this is soo good! thank you soo much :)
Thanks 👍
Sir so so do you offer a config to a similar client ? I would travel to you , but hotel for a weekend . You teach me and others I know want to take same situation . You are a master with Internet engineering .
Hi,
You can what app your requirement we will check and update you.
Thanks
thank u so much u helped alot
👍
Very cool lab! thanks
👍
thanks for your help
You are welcome
thanks man, been using server 2016 to study stuff and wondering how to do it on packet tracer.
👍
Sir too fast . But your skills are impeccable . I’ve bees CCNA and MCITP from 2014
All the best
Amazing ❤❤
Thank
wonderfullll , I have just subscribed
Thanks and welcome
@@networkforyou11 🩷
thank you so much. Can i extend it? i would like add network exactly like this one more?
Hi,
Yes you can do that.
Thanks
Great video. The audio goes low occasionally.
Hi,
Thanks. We will take care in next videos.
Thanks
Thank you so much for this presentation. But i uave a question. Assuming you internet to nat to the private ip that reside on the server . What command wilk you use in the cisco router .
Hi,
See if you have private ip in Lan site and Want sat public ip then you need to configuration NAT.
It is simple
You can what app ur our team will support you.
Thanks
Thanks brother
You're welcome!
Thank you 😉
👍
🔥🔥🔥🔥 Video
👍
Amazing videos man. Im learning very well from your videos. Please keep it up 💙✨
Thanks, will do!
Please how do I simulate a scenario where a malicious dns server directs web clients to malicious websites?
I’m having a problem with this
Hi,
Ok sure we will make video on that.
Thanks
Do you have tutorial in static network?
Hi,
Yes we have look our UA-cam channel.
Thanks
Thank Youuuuuu
Thanks
don’t we need to configure the RIP on router0? and the ip configuration of the router could be done like other devices on “ip configuration”?
Hi,
RIP we use when we have more 1 router.
Thanks
Jabari Harbors
Thank u
👍
how to add another router with a subnet
You can just drag and drop and connect
The thing is when i am configuring pcs on the left side it is saying that "dhcp is failed, APIPA is beiung used".
Hi,
What app us your packet tracer file. We will check with sir and update you.
Thanks
Hello it’s because your left side has no dhcp server so u have to configurate an IP helper on the router
@@daniabh-xx8kh I did this, still failed for me
Edit: I was dumb, “left side” meant the f0/1 interface is where the command “ip helper-address [ip address of dhcp server]” needed to be issued.
If anyone is still having issues, you can make the router itself be a dhcp server for those range of addresses by issuing these commands from global config mode
“ip dhcp excluded-address [default gateway address]”
“ip dhcp pool [name of your choice]”
“network [network address] [subnet]”
“default-router [default gateway address]”
For this video:
Default gateway = 192.168.1.1
Network address = 192.168.1.0
Subnet = 255.255.255.0
I am having the exact same problem, I have checked everything to make sure I have not made any mistakes with configuration, I am not sure why the left hand side does not work and I get the same issue I have also checked the packets it does not show much I can do. I am new to packet tracer and in IT field so trying to build my networking knowledge please find out why this is a issue and the IP helper command doesn't bring the IP for the PCs on the left.
@@daniabh-xx8kh I tried to do what you were and still wrong !!!!
While using DHCP within a same switch my PC are unable to get Default Gateway what's the problem
Hi,
Try to check did you configuration dhcp server correctly? Or what app us share your topology we will check and update you.
Thanks
Could you please share lab manual for this 😢
Hi,
Join our telegram channel we share there labs files..
Thanks
Hey, I can’t configure the router😭
Hi,
Why what problem you are facing. What app us our team will support you.
Thanks
configuration routers
Hi,
How we can help you.
What app us.
Thanks
Router(config)#ip dhcp pool lan
Router(dhcp-config)#network 192.168.1.0 255.255.255.0
Router(dhcp-config)#default-router 192.168.1.1
Router(dhcp-config)#dns-server 192.168.2.3
Router(dhcp-config)#exit
Router(config)#exit
Router#
%SYS-5-CONFIG_I: Configured from console by console
Router#conf
Configuring from terminal, memory, or network [terminal]?
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#dhcp pool lan2
^
% Invalid input detected at '^' marker.
Router(config)#ip dhcp pool lan2
Router(dhcp-config)#network 192.168.2.0 255.255.255.0
Router(dhcp-config)#default-router 192.168.1.1
Router(dhcp-config)#dns-server 192.168.2.3
Router(dhcp-config)#exit
Router(config)#exit
Hi,
How we can help you.
Thanks
Not seruvaaa, SERVER.
Hi,
Did not get what is your question?
Thanks