i use same oil love it ! By the way after you drain all oil from bottom try plug then you are supposed to remove filter and oil can when you add oil that way the moust of old oil leakes out. you can even shake atv a little to get even more old oil out. But great video man. pretty atv. I have 2007 arctic cat 700 EFI love it
Bwhaha, I was watching this video and my husband came in and said “what are you watching?” Love the man sounds. Bwhaha. This video really helped, I did it myself!
As I read your message, I then found out what man noises you were talking about. Now I see why your husband came in. lol I wonder how many Mainah's have watched this video.
So it looks like you put 3 quarts of oil. I called a Artic Cat dealer and they told me 3 and 1/2 quarts. I'm assuming it would have taken another half quart.
I would check your local Napa or Carquest, they should be able to match up the thread pattern and usually offer some slightly oversize plugs that are tapered on the end and fluted so they cut new threads. Or search online for oversize drain plugs if you can find out what the original thread pitch is.
Steve Fox I'm not familiar with that machine, but typically you would fill a differential to the bottom of the fill hole, until it starts to trickle back out.
John Belderes No, this will not drain the tubes and cooler, however the volume of oil left behind isn't that great. it's not necessary to flush them unless they are contaminated.
Hi Maineyak - at the dealership today they sold me Arctic Cats brand of oil and told me to not use any other oil because of how the machine filtrates the oil while running. Of course it was a $40 one gallon jug. I notice that the Valvoline 10w40 is only $4.00 a quart, so $16 per gallon. Are you certain that this is okay to put in an Arctic Cat? If so, I was mal informed by the dealer and robbed $24 bucks!
Dane Broome The dealer will always recommend its own products, but it is not required. It could be a company like Valvoline that actually makes the oil for Arctic Cat. I have decades of parts experience and selling motor oils. Most oils of today are even better than what was on the market 10 or more years ago. The most important thing is to just always change your oil on time. Hope this helps!
Some stealerships, I mean dealerships will do just that, say you have to use the manufactures brand oil for said brand manufactured bike you have or it's the end of the world for your bike. They are marking up the price on the oil on people that do not know any better.I heard one salesman tell a customer oh that's a synthetic oil you got there in your hand if you use it in your bike you'll have to stay with it because you cannot switch back to conventional oil after using a synthetic oil, because if you do you'll have all kinds of oil related problems with your bike,that's freaking b.s. and a myth. If you read the owners manual most manufactures recommend their own brand of engine oil or a equivalent oil spec to use, another words what ever brand oil you buy you want it to be the same specs aka motorcycle/atv oil, do not use regular car/pickup oil, it's not designed/specked to be used for wet clutches that most atv's have. I use Rotella 5w-40 synthetic oil in my 2008 Arctic Cat 650 H1 4x4 and Rotella 15w-40 in my 2005 Suzuki Eiger 4x4 I also use the Rotella 15w-40 in my Dodge Cummins diesel and I have used it in my wife's gasoline car with no problems. On the back of the gallon jug of Rotella it will say JASO-MA approved meaning it's specked to use it in motorcycles or atv's also. Best thing is do your research first on your manufactured brand of atv so you don't get ripped off by marketing tactics.
@@NLINE7 thanks for the info. I got 10 W 40 motor oil I was going to use in my 2005 Artic Cat 400. I didn't realize there was specific 10 W 40 for ATVs
To check level u start bike let run for 3 to 4 min then u shut off for 3 min then u check level. Also u don't rev the motor u let it idle. Next time u take your car for oil change watch them change the filter there not going to lube the gasket LOL unless a newbe not to be rude I get it your trying to do it the right way..
Of all the things I've lost, I miss my mind the most. Keep up the good work.
thanks very helpful. I will be changing my 400 Cat on Saturday!!
Thank you so very much. I can now do my own oil change on my machine. Grateful to you sir.
i use same oil love it ! By the way after you drain all oil from bottom try plug then you are supposed to remove filter and oil can when you add oil that way the moust of old oil leakes out. you can even shake atv a little to get even more old oil out. But great video man. pretty atv. I have 2007 arctic cat 700 EFI love it
Little bit of everything that's what he did though didn't he?
Thank you for taking the time to make this informative video.
Bwhaha, I was watching this video and my husband came in and said “what are you watching?” Love the man sounds. Bwhaha. This video really helped, I did it myself!
Hahah that's excellent, thanks for watching!
As I read your message, I then found out what man noises you were talking about. Now I see why your husband came in. lol I wonder how many Mainah's have watched this video.
Thanks this helped me and my grandpa
According to Arctic Cat manual, torque for oil drain plug is 16 ft-lb. Front/rear differential drain plug is 45 inch-pounds, fill plugs 16 ft-lbs.
Thank you for the video it was so helpful
Thanks for making this video
thank you so much for your help !
you're very welcome, thanks for viewing!
They say to screw cap in to check it in the manual
Can I use 5w 30 for my ATV? I have the exact same one you do but I live in Canada and it gets very cold here
That would probably work fine imo
@@Maineyak thanks for the reply. I used 0w40 synthetic. Works great
What is your wheel and tire set up on your bike? Looks good!
I believe they were 27" Mud Lites, on 12" Aluminum SS rims. Thanks for watching!
You don't use the factory crush washer on the drain plug?
Hello.
articcat trv 550 xt model atv does not shift into gear when started. thanks
So it looks like you put 3 quarts of oil. I called a Artic Cat dealer and they told me 3 and 1/2 quarts. I'm assuming it would have taken another half quart.
Damn. You called them just to see if he did it the right way? 😶
2008 Arctic Cat 500, Automatic Transmission Engine Oil capacity: 2.5L, 2.6 US Qt (13/16 socket)
Attic cat? Good stuff. Pros cons. Where did you get one. Why did you chose AC over other makes
Thanks
Oh, yeah! Oh, my Gawd!
😂
In the manual on my 2010 arctic cat, it says to screw the dipstick in
What was the Napa part number?
Stripped the drain plug. Got any suggestions?
I would check your local Napa or Carquest, they should be able to match up the thread pattern and usually offer some slightly oversize plugs that are tapered on the end and fluted so they cut new threads. Or search online for oversize drain plugs if you can find out what the original thread pitch is.
Did you put oil in the new filter before you put it back on?
It's upside down so if you want to lose most the oil you put in it and make a mess! No need to just oil the seal up!
Just a FYI it’s metric sockets u need
I have a artic cat 400cc i don't know how much oil to put the might put a wrong stick
so 10w 30 is the oil I'm gonna need for my 550 2013/2014 artic cat ?
Still helpful
MY 2003 has a sight glass on the left side of the crank case... I have not seen any example of this on you-tube, what am I Missing
Premium versions have the sight glasses. I have a 2004 that has that as well. Consider yourself lucky, they don’t make them that well anymore.
CHEERS I HAVE 2 CHANGE MINE
hi i have a 2010 xtm wild cat 2x4 300f farm quad how much gearbox oil and diff oil do i put in
Steve Fox I'm not familiar with that machine, but typically you would fill a differential to the bottom of the fill hole, until it starts to trickle back out.
where did you buy the lights
Does the oil cooler drain using this procedure?
John Belderes No, this will not drain the tubes and cooler, however the volume of oil left behind isn't that great. it's not necessary to flush them unless they are contaminated.
1:32. If you just listen and not watch. Lmao
James Pitts lmao
Hi Maineyak - at the dealership today they sold me Arctic Cats brand of oil and told me to not use any other oil because of how the machine filtrates the oil while running. Of course it was a $40 one gallon jug. I notice that the Valvoline 10w40 is only $4.00 a quart, so $16 per gallon. Are you certain that this is okay to put in an Arctic Cat? If so, I was mal informed by the dealer and robbed $24 bucks!
Dane Broome The dealer will always recommend its own products, but it is not required. It could be a company like Valvoline that actually makes the oil for Arctic Cat. I have decades of parts experience and selling motor oils. Most oils of today are even better than what was on the market 10 or more years ago. The most important thing is to just always change your oil on time. Hope this helps!
Some stealerships, I mean dealerships will do just that, say you have to use the manufactures brand oil for said brand manufactured bike you have or it's the end of the world for your bike. They are marking up the price on the oil on people that do not know any better.I heard one salesman tell a customer oh that's a synthetic oil you got there in your hand if you use it in your bike you'll have to stay with it because you cannot switch back to conventional oil after using a synthetic oil, because if you do you'll have all kinds of oil related problems with your bike,that's freaking b.s. and a myth.
If you read the owners manual most manufactures recommend their own brand of engine oil or a equivalent oil spec to use, another words what ever brand oil you buy you want it to be the same specs aka motorcycle/atv oil, do not use regular car/pickup oil, it's not designed/specked to be used for wet clutches that most atv's have. I use Rotella 5w-40 synthetic oil in my 2008 Arctic Cat 650 H1 4x4 and Rotella 15w-40 in my 2005 Suzuki Eiger 4x4 I also use the Rotella 15w-40 in my Dodge Cummins diesel and I have used it in my wife's gasoline car with no problems. On the back of the gallon jug of Rotella it will say JASO-MA approved meaning it's specked to use it in motorcycles or atv's also. Best thing is do your research first on your manufactured brand of atv so you don't get ripped off by marketing tactics.
@@NLINE7 thanks for the info. I got 10 W 40 motor oil I was going to use in my 2005 Artic Cat 400. I didn't realize there was specific 10 W 40 for ATVs
It’s called theft!
To check level u start bike let run for 3 to 4 min then u shut off for 3 min then u check level. Also u don't rev the motor u let it idle. Next time u take your car for oil change watch them change the filter there not going to lube the gasket LOL unless a newbe not to be rude I get it your trying to do it the right way..
If they don't lube the gasket they are taking a chance of ripping the oring or gasket
those blue headlights are super douchey
You're super douchey. Douche man
+Gilbert McCumhumphries I bet you jam out to Luke Bryan, and wear jeans with rhinestones on them. affliction shirts and shit.
we'll never convert! lol :-P
Never convert !!!!!!
ohhh yeah lol
Creep.
😂😂🤣🤣🤣😂🤣
Thanks for the video it was awesome! Do you have a "replace fuel filter video"?