We can also have an option such as add button: So that you can add button with value of IP ADDRESS and we can switch within IPs with just a click. Anyway this is just another option.
Cool very good one more question you have a video with both apps on the same board this app you invented and the other Blink one for internal use and the other for external use both on the same board so I can use it at home when I'm not Internet
Just learning and searching for beginner videos. I see you appear to have created blocks but not sure how you got the code from the MIT App builder software to the Arduino IDE? Also, is all the code you show in the Arduino IDE generated from the MIT App builder software?
Hi i'm Harsh I'm following u since long I have recently made a quadcopter by using apm 2.8 I have done all the needful(programming,installing frimware,all calibration) Everything is successfully done. But the problem is my apm 2.8 is arming. If u can guide me what to do It will be a pleasure.
very good explanation, but did you know how to connect buttons to the arduino to switch the relay on / off and send a message to the app on my phone to see it on screen? I had made this configuration you described, but i need to have physical buttons on my arduino to control not only remote. The only thing what i dont get working is to see on my phone if the button is hit and the state of the relay is changed.
This can realize only local control. Remote control is not done. If any newer video is there, then kindly send me a link for the saame for remote control.
Legal muito bom mais uma pergunta você tem um vídeo com os dois aplicativos na mesma placa esse seu app inventou e o outro o Blink um para uso interno e o outro para uso externo os dois na mesma placa assim vou poder usar em casa quando não estiver internet
The blocks you are using in the app inventor photograph do not exist. Where are they in the control blocks the are only if. I don't find them. Can you provide us with the .aia file of app inventor?
Show a video where you can upload coad from mobile like downloading libraries and coad from mobile it will owsome because I did not have laptop 😁😁😁🙏🏻👍👍
you probably dont care but if you guys are bored like me during the covid times you can stream all of the new series on InstaFlixxer. I've been watching with my gf recently =)
We can also have an option such as add button: So that you can add button with value of IP ADDRESS and we can switch within IPs with just a click.
Anyway this is just another option.
Very good project. I liked it
is there any way to make our app serch for ip addresses at the network and let the user sellect the device that he want, like remotexy?
Cool very good one more question you have a video with both apps on the same board this app you invented and the other Blink one for internal use and the other for external use both on the same board so I can use it at home when I'm not Internet
Just learning and searching for beginner videos. I see you appear to have created blocks but not sure how you got the code from the MIT App builder software to the Arduino IDE? Also, is all the code you show in the Arduino IDE generated from the MIT App builder software?
My IDE says ESP8266.h no such directory,,, how can i fix that
Very Informative Video Bro Really Great Work Keep it up 👍🏻👍🏻👍🏻
Hi i'm Harsh
I'm following u since long
I have recently made a quadcopter by using apm 2.8
I have done all the needful(programming,installing frimware,all calibration)
Everything is successfully done.
But the problem is my apm 2.8 is arming.
If u can guide me what to do
It will be a pleasure.
very good explanation, but did you know how to connect buttons to the arduino to switch the relay on / off and send a message to the app on my phone to see it on screen?
I had made this configuration you described, but i need to have physical buttons on my arduino to control not only remote.
The only thing what i dont get working is to see on my phone if the button is hit and the state of the relay is changed.
Great video!Thank you
Very good sir
Sir in app can we show wifi connection done means confirmstion if connected then green lamp other wise red lamp on
How you made your intro of your channel??
How to add sensor like door sensor or pir sensor on same app?
Is it possible to make the same device with such control but on GSM SIM800 via DTMF and an application in mit app inventor
how to force the ip? I don't want to always add the ip address.
This can realize only local control. Remote control is not done. If any newer video is there, then kindly send me a link for the saame for remote control.
is the ESP8266 working on TCP or UDP mode? is it server or client? how is that you have not mentioned the port number?
j'ai une application web qi have a web application that sends data and i need a code on esp8266 to read each data sent, could you help me?
BEST PROJECT
How can we add a push buttons in mit app inventor?? Can you make video on this. plz bro...
amazing project
VIETNAM with love
Very nice, clean and proffesional! Just what I was looking for. Thanks a lot - from Israel
Legal muito bom mais uma pergunta você tem um vídeo com os dois aplicativos na mesma placa esse seu app inventou e o outro o Blink um para uso interno e o outro para uso externo os dois na mesma placa assim vou poder usar em casa quando não estiver internet
Sir, I have a question if we do the same as you are doing can we control it from everywhere around the world please do reply...?
I ALSO MAKE APP JUST LIKE VIDEO AND TEST MY APP
Yes
I tried it
Just to clarify - to get the light to turn on the code from the App to the nodemcu is "ipaddress_of_nodemcu/relay1on"?
Make a video tuturial about MTV app making
make a project esp now relay 8ch sir, I'm waiting for the project
hye can i know why my ip adress not pop out at seriel monitor , please help me🙏🙏🙏
can you help me code sync data between esp8266webserver and app inventor
What is name of aplication to make cirkuit sir???
It is posible without wifi internet?? Mybe the esp make to AP mode
Yes it's possible
Bro......how to safe my access point of NodeMCU......it must secured.......plzzz...give a video about it
i was trying to recreate this, but i cant find the set web1. url piece. pls help me
Is this work only on local network?? Or any network??
Excellent project.
Wow great bro
🌺🌺🌺♥️
Tell bro how to do that please
I AM DOING THIS PROJECT
thanks for the video
Sir ..can 8 channel relay be made like this video
The blocks you are using in the app inventor photograph do not exist. Where are they in the control blocks the are only if. I don't find them. Can you provide us with the .aia file of app inventor?
You have to make those blocks
@@ViralScience please provide the .aia file of app
Can we connect mobile and device with different wifi
Can you make mobile control drone
is it possibole to control lights from anywhere of the world
Error appears while compiling : 'connectWiFi' was not declared in this scope
You should have added an ac regulator
Show a video where you can upload coad from mobile like downloading libraries and coad from mobile it will owsome because I did not have laptop 😁😁😁🙏🏻👍👍
Okay I will try to cover this
Thinku bro
WHERE IS THE FULL SETUP YOU TUBE VIDEO
Bhai play store ke app se kam karega ya nahin
How does it works??
Hi hru
Can you help me to send data from esp to app thanks 😊
The IP, is it the router ip?
hi can you give the link of .aia file of the app
Good job :)
how to send text to lcd using ip adress -esp8266 also
Amazing project 👌
you probably dont care but if you guys are bored like me during the covid times you can stream all of the new series on InstaFlixxer. I've been watching with my gf recently =)
@Ramon Izaiah yup, been watching on InstaFlixxer for months myself =)
Can you send link for esp8266wifi.h file?
Ip address gets changed after restarting
Please code
Can you control from work?
sure. Buy fixed IP address to your home from ISP, open ports in router to get the traffic in, and control from everywhere
library please🙏
🤘🤘🤘🤘🤘
Tell bro how to do that plz bro 🌺🌺♥️
Assume project!!can u give me one pcb?
bro can i get aia file for this project please
Sar mobile se nudmcu ki programming karne ki video banaye Hindi mein please
Add Voice recognition please
Video to sahi hai lekin agar beta hindi me hoti to acha Hota
Bhai tumari Gerber file open nhi ho rahi hey
Its a Zip file, you will find a download option just directly download it.
It may be not supported in smartphones
Good for project not as for product
I was not so late haha
PLEASE GIVE REPLY FAST
Hii
Please
None of this guys programs ever work for me. Always an Error