Building a electric mini moto (pocket bike) with some electric scooter parts and iron sitting around. 1600W 48V brushless motor. Made for pure fun. Enjoy...
good job with what you had. i once saw in Thailand a man make a piston for a Vespa scooter that had shattered its piston, i did not think it would work but the thing started up and rode,, not sure how long for but the guy assured him he would get home and more no problem.
Cool build.. but why would you wreck the rear tyre n inner tube? Seems pointless to me, now you have to source a new tyre etc.. get rid of the four lead acid batteries and swap them for a 48v lithium ion battery.. boost your range, your speed, quicker to charge, lighter to pick up etc.. plus swap out your sprocket on the motor for a larger one and decrease the rear sprocket by about 20 teeth.. more speed etc..
Tobhas Hadenuff lithium ion batterys can catch fire just by exposure to water! a marine or boat battery would be heavy but would end the need for 4 batteries and would last longer. my friend put one on a jeep powerwheels, and it drove my fat ass up a 60degree hill. at about 12 mph. perhaps a alternator could be mounted and set up to a pully on the opposite side of the rear wheel , and it would/should keep a decent charge on the battery. maybe get crafty and hook up some capacitors. that monster would probably lay down rubber as soon as ya sat down and twisted the throttle!
I'm doing a dual fuel moped build with a minimoto engine and electric motor both powering the rear wheel, I thought maybe fit a small car alternator fitted with a rubber wheel to the front forks on a cable brake using a splitter, when front brake applied the alternator would pull down onto the tyre and create voltage to charge batteries a bit.
on the electric scooter they last around 20 - 25km... here maybe a little more because the less weight and less air resistance from the different sitting position... didn't try to empty them yet on the mini moto...
I need a bldc motor to run between 30 to 3000 rpm with a load of 40 kgs for 30 min on low and 15 min on high rpm! can I use these types of bike motors without gear reduction? Do I need to use a dual motor for my needs?
Видео очень классное и музыка очень хорошая идея и работа тоже лайк ! но аппарат такой с такими колесиками не практичный ! можно разве что по треку ездить ! а так автор Молодец ! Удачи в Новых идеях !
if a motor output shaft is rotated at high rpm when the motor is not powered and the vehicles wheel motion going downhill steeply is spinning the motor output shaft will this damage a motor and hall sensors on some motors in non regen mode? i thought about using the cyclone 1680w motor on a pit bike frame but worried the motor hall sensor might get damaged if spun at high rpm when not powered closed throttle
How are you getting 50 odd kmph. I'm running a chaos 48v 1600w. With same size wheels and smaller sprocket and I only get 39 kmph? I'm interested in getting the most out of this motor. Great build mate
Great job didnt borrow any parts for frame but you really should've stole tripple clamps from a dirt bike that's extremely dangerous and the way you mounted those make shit handle bars beyond dangerous just find an old Chinese dirt bike and rob the front end
Hi my name Rodrigo friend I found your mini electric motor very incredible I would like to make an asim you could give me some tips because they are new in this and I do not know much about the speed controller I would be very grateful if it returns me as message I know that your video already has time in the air but the idea still inspires several people.
thanks, you can find all the parts on ebay or aliexpress... they sell kits wich include motor, controller and throttle... you can also find there batteries (4x12V)...
Hello i have bought a 1800w 48v motor recently and am struggling with finding a good battery i dont have that big of a budget could you please help me find a good motor?
Hi, you can find a good battery at AliExpress, Etario battery store. Recently I bought a lot of lithium batteries from them (48V 26Ah 2000W) and they are great for that kind of motor.
very nice project, but i think you could make it lighter, as i see it a very high weigh body 👍 edit : adding a thinner and bigger wheels will make a better performance at the speed and will make the best use of the engine
what batterys and sprocket are you using to for the 1800w motor. i recently bought a 1800w motor but i have a budget and i cant find any batterys that would work for under $400 please help
On that project I was using lead acid battery 4 x 12V 12Ah. Now on the drift trikes (2000W) I'm using lithium batteries 48V 26Ah 2000W. HRK 1,478.41 3%OFF | 48V 25AH Lithium Battery 48V 1000W 1500W Electric Bike Battery 48V 10AH 13AH 15AH 18AH 20AH 25AH Ebike Battery Pack+5A Charger a.aliexpress.com/_mOZwljg
what kind of motor did it come out of I have a electric dirt bike and I was wondering BTW I'm to big for it lol and I want to build something cool out of it
an unrivaled creation.
good job with what you had. i once saw in Thailand a man make a piston for a Vespa scooter that had shattered its piston, i did not think it would work but the thing started up and rode,, not sure how long for but the guy assured him he would get home and more no problem.
Scrap parts and ingenuity. Can't beat it....
I made a mini bike completely of wood and in the end it wooden go
This made me crack up
Good job man.
thank god people are still making stuff!
Awesome build man! Love the backyard approach!
Sua moto ficou top
props for creating this thats pretty bad ass
Brilliant setup dude! I would love to see more. How about adding a decent heat sink, that will make sure your motor windings last longer..
Not my style of ride but great build. I love all things electric to ride!
Cheers
Same here
Damn you hand built the whole bike. I thought it was gonna be a motor swap. Good job
Too long with the burnout.... Why people want to purposely ruin a perfectly good tire is beyond me....
JaleelJohanson62 it’s fun and smells good
yep, totally agree, and it ruins the mecanic :s
Totally agree!! Why the fuck indeed!
Because youtube views
that bike is capable of reaching 3000km/hr and for such speeds, it is important that the tires have excellent grip. 😂
Nice System To Using The OLD TUBE Tyres
Ahh the old tire smoke test. They hate that at the dealership
yesi can hula I of esi
Lmao
Time for 72v setup
Great work!!
nice creativity it looks like a beast
this is the most simpliest motorcycle
lol with my eyes closed your burnout sounds like me trying to start my (late) 900 dollar R1. She always started though, eventually lol
*Very nice Idea !* I like it 😆
Wow very good!!!
While burning ha awesome buddy..
Great build :) hope you have fun playing with it.
Very nice electric scooter
it looks powerful good job man
Good choice of music ;)
o0julek0o Paul... :)
Dominik L.u
o0julek0o Yeah! That sounds sexy!
it sucks but at least he didn't have some like heavy metal at full gain drowning out the rest of the video like most people do
វ
great video keep them going!
Aluminium instead of wood on the handlebars, it has more strength and it is more lightweight!
Riste Milkov Titanium OR Carbon
Der Übermensch he's only building it from scraps
what is expected range of this electric bike??
awesome build 👍
speed?range?esc? You left off all the secret sauce.
Bro.....Ur AWESOME!!!!
thats just awesome dude..damn!!!!
Fantastic!!
Nice System To Using The OLD TUBE TRY S
Cool build.. but why would you wreck the rear tyre n inner tube? Seems pointless to me, now you have to source a new tyre etc.. get rid of the four lead acid batteries and swap them for a 48v lithium ion battery.. boost your range, your speed, quicker to charge, lighter to pick up etc.. plus swap out your sprocket on the motor for a larger one and decrease the rear sprocket by about 20 teeth.. more speed etc..
Tobhas Hadenuff plus its cheaper
Tobhas Hadenuff lithium ion batterys can catch fire just by exposure to water! a marine or boat battery would be heavy but would end the need for 4 batteries and would last longer. my friend put one on a jeep powerwheels, and it drove my fat ass up a 60degree hill. at about 12 mph. perhaps a alternator could be mounted and set up to a pully on the opposite side of the rear wheel , and it would/should keep a decent charge on the battery. maybe get crafty and hook up some capacitors. that monster would probably lay down rubber as soon as ya sat down and twisted the throttle!
Can't get free power like that. If you used the alternator soley for breaking, then that could work, though.
I'm doing a dual fuel moped build with a minimoto engine and electric motor both powering the rear wheel, I thought maybe fit a small car alternator fitted with a rubber wheel to the front forks on a cable brake using a splitter, when front brake applied the alternator would pull down onto the tyre and create voltage to charge batteries a bit.
dean31black awesome idea, you should do a video about that project
Excelente tu trabajo amigo. ;)
Hahaha, this looked like a lot of fun! Now I wanna make one.
Big Kids
best electric mini bike build on youtube probably forever!!! only thing is that is it is too small.. but that's just my opinion. Nice work!
forgot somthing, how long did the batteries last (before recharge)?
on the electric scooter they last around 20 - 25km... here maybe a little more because the less weight and less air resistance from the different sitting position... didn't try to empty them yet on the mini moto...
Thanks, I'm interested in building one like yours. Any tips?
just be creative... :)
Best tip ever👍
very nice, bro!
good
Very nice 🏍💨
It was really amazing bro 😃
Good job
Nice
You riding this bike looks like Shrek riding the donkey.
rsrrsrsrse boa
Awesome build man :)
I like that happy end! ;)
Now it's a 3 wheeled bike.
wow cool
it looks super tourqey. what type of motor suited the build best??? which controller?
Super
AWESOME THUMBS UP
I need a bldc motor to run between 30 to 3000 rpm with a load of 40 kgs for 30 min on low and 15 min on high rpm! can I use these types of bike motors without gear reduction? Do I need to use a dual motor for my needs?
muy bueno. felicitaciones. me podrías decir que batería utilizaste?. estoy armando una moto electrica con una moto 125
Видео очень классное и музыка очень хорошая идея и работа тоже лайк ! но аппарат такой с такими колесиками не практичный ! можно разве что по треку ездить ! а так автор Молодец ! Удачи в Новых идеях !
Good work :)
its nice to build an e bike but the next lvl is how the charge the battery without charging daily like cars.
Where did you get the motor from and what is it off
That's an electric scooter motor. Go on eBay and search "48v motor 1600w"
if a motor output shaft is rotated at high rpm when the motor is not powered and the vehicles wheel motion going downhill steeply is spinning the motor output shaft will this damage a motor and hall sensors on some motors in non regen mode? i thought about using the cyclone 1680w motor on a pit bike frame but worried the motor hall sensor might get damaged if spun at high rpm when not powered closed throttle
Nice project. Although 50 KPH with wooden triple trees... I'd be afraid.
уахахах жгет резину на велике) попробовал бы со сетофора дать такой старт с дымом, а то упер в стену и дым пускает уахахаха
awesome 22 siraaa lata tu ta....full chakwa kam aa
How are you getting 50 odd kmph. I'm running a chaos 48v 1600w. With same size wheels and smaller sprocket and I only get 39 kmph? I'm interested in getting the most out of this motor. Great build mate
What's the reason for the burnout? You weren't happy with the rear tire?
yes, it was an old, bad tire...
Awesome... How much did you bought the motor? Thanks for sharing.
Great job didnt borrow any parts for frame but you really should've stole tripple clamps from a dirt bike that's extremely dangerous and the way you mounted those make shit handle bars beyond dangerous just find an old Chinese dirt bike and rob the front end
nice one
super
Awesome
Nice work...
Can you pls give details about the motor.
Thanks
MY1020 . they come in 24V/500W, 36V/800W and 48V/1000W
Why did you make the battery box out of heavy gauge steel, it just adds extra weight.. should have used fibreglass or aluminum sheets for it
liko for the project and for you but you ave take a beatiful song...paul kalkbrenner is my favorite
Sir can you tell me about the specifications of motor, controller, battery
It's in the thumbnail i think
awesome
have you a electric brake right ? you have to inversion polarized motor...I think true?
it has disc brakes, it doesn't brake with the engine.
which battry did you put ?
brilliant job
congratulations
Hi my name Rodrigo friend I found your mini electric motor very incredible I would like to make an asim you could give me some tips because they are new in this and I do not know much about the speed controller I would be very grateful if it returns me as message I know that your video already has time in the air but the idea still inspires several people.
thanks, you can find all the parts on ebay or aliexpress... they sell kits wich include motor, controller and throttle... you can also find there batteries (4x12V)...
Many thanks for answering me zujo09 grateful.
Hey there, what is the calculations to make the bike? like motor details and battery details?
Hello i have bought a 1800w 48v motor recently and am struggling with finding a good battery i dont have that big of a budget could you please help me find a good motor?
Hi, you can find a good battery at AliExpress, Etario battery store. Recently I bought a lot of lithium batteries from them (48V 26Ah 2000W) and they are great for that kind of motor.
very nice project, but i think you could make it lighter, as i see it a very high weigh body 👍
edit : adding a thinner and bigger wheels will make a better performance at the speed and will make the best use of the engine
what batterys and sprocket are you using to for the 1800w motor. i recently bought a 1800w motor but i have a budget and i cant find any batterys that would work for under $400 please help
On that project I was using lead acid battery 4 x 12V 12Ah. Now on the drift trikes (2000W) I'm using lithium batteries 48V 26Ah 2000W.
HRK 1,478.41 3%OFF | 48V 25AH Lithium Battery 48V 1000W 1500W Electric Bike Battery 48V 10AH 13AH 15AH 18AH 20AH 25AH Ebike Battery Pack+5A Charger
a.aliexpress.com/_mOZwljg
@@DriftTrikeRovinj ok thanks for the help
you are creative bros!
What did you use the electric motor?
Love it. Tell me one thing.........how do you make those pivot points? Thanks.
Which things you have buyed to made this bike
Can the motor run for 12 hours is the motor brushless
What size chain is this using ?
Style !!!
i like it :)
Interesting video but it will be a silent one for me because of the music
amazing job get a like!!
what kind of motor did it come out of I have a electric dirt bike and I was wondering BTW I'm to big for it lol and I want to build something cool out of it
It's from a 1600W 48V electric scooter.
where did you buy the motor
Stop hurting that nice tire and those nice batteries
Which motor are use in electrc bike
What is your feeling on how the suspension worked out? Would you make any changes?
This motor is waterproof. yes or no
What batteries? And how long does it last on a charge?
^i can’t believe this was only four months ago my bike is built now and running like 2600 watts 🤣
Good job. And the batteries?
Мне одному кажется, что 1600 ватт и 48 вольт должны ехать побыстрее, чем 50км/ч?
Сделано на мощность