Nice circuit for what it is, but if you are to use this for a real night time light, you need to make a time delay setup or a cloud going by would turn in on. And install a relay could allow it to use most any type light bulb or LED for the light...
Hi sit Can I use heavy duty 220v relay instead of bulb I want to use it for 100+ street light by the use of heavy duty relay contact.please advise. I have used very small LDR but it blasted. What rating ldr do I need?
Probably will cause flickering with LED light as voltage is severely cut to a lower frequency. Incandescent light has thermal radiation to cover the pulse.
If you want to make it opposite than you watch this video. In this circuit you only need to change relay connection to n/o. ua-cam.com/video/KD2t7azyRBM/v-deo.html
@@Erpankaj925 oh dear..... well first LDRs vary a LOT in value and response which your design FAILED to address. Second the construction is TERRIBLE. Third is no explanation or advice. Just because yours seems to work does NOT mean it is a good design or will work. for others It is a fluke I feel that in trying to use as few parts as possibel / as simple as a design as possible you are ending up with a bad design. I will look for a simple circuit as well - it is NOT easy - but I do not sacifrice things like reliability and robustness
Nice circuit for what it is, but if you are to use this for a real night time light, you need to make a time delay setup or a cloud going by would turn in on. And install a relay could allow it to use most any type light bulb or LED for the light...
Thanks for your reference, please check my another video for this circuit with relay.
I think you mean hysteris [spelling?
You can replace the 220k resistor with 100k and overlap it with a 500k potentiometer to adust sensitivity so partial darkness will not trigger it.
रतन लाल मीणा नै , सरकीट बनाया , कि रात को ब्लब चालु दिन को बन्द सामगरी bt 136 , LDR 220k ईस के बाद भी दिन ब्लब बन्द नही हौता
Fake hai...
can I use tip41c triac?
No
Can i change it with bt 139
Bt136 के साथ हीट सिंक लगाए या नहीं?
Heat sink jaruri hai.
@@Erpankaj925 Good you understand Hindu writing...
Greetings from Argentina!!!
Not working 😕 7w 9w
I use same elememts. But it shines all time. When it is dark, it shines more. Maybe my ldr is somehow different ? And i need bigger resistor ?
You should seperate ldr from light
Can I replace BT 136 with other elements as I don't have it?
Can we use led instead of bulb ??
Yes you can, but wattage should be same.
@@Erpankaj925 that's mean the register remain same
Yes
@@Erpankaj925 thank you and last question can you tell how can i give the same voltage ?
Hi sit
Can I use heavy duty 220v relay instead of bulb I want to use it for 100+ street light by the use of heavy duty relay contact.please advise. I have used very small LDR but it blasted. What rating ldr do I need?
Sir , What modification are needed if I want to use more than 100 w bulb?
Bt 136 triac hold maximum 4A current and 600v, you don't need to do any modification for using more than 100w bulb. You can use.
Traic BT136 allow 4A and 6A for short time, however when u need more current you may use other TRAIC which are available from 4A-80A
not work
For low Watt lamp 20 30 W??
Great,
Bhai, traiac bt 136 ke saath min HEAT SINK lagana chahiye, night bulb ( 15 watt ) ka used karna hai.
please tell me bhai.
Yes heat sink lagana jaruri hai or bulb 15 se 100w tak koi bhi laga lo.
@@Erpankaj925 thank you so much bhai
@@Erpankaj925 bhai, street light circuit work kar raha hai , but zero ka bulb ( 15 watt ) 50 % brightness kam hua.
please tell me bhai
9 w bulbs working ya nahi sir plz reply
It will work but you have to change resistance value accordingly.
@@Erpankaj925 kitna k ohm
5 second me 1 bar bling karega kaise banaye sir plz btaye
220k register watt.....?
I tried the circuit, not working. Reason if any please explain.
Bhai blub flick ho raha hai... Kya karu ?
Ldr ko seperate karo bulb ki light se flicker hoga
Same yahi problem ho rahi hai mere sath bhi blink kyu kar ra hai
@@Sunny_sahu_shanky there is another video in my channel for stable circuit which have more components please watch that.
HOW MANY HOURS IT WILL LAST?
if you give it proper cooling and heat sink than it will last as much other electronic components.
Probably will cause flickering with LED light as voltage is severely cut to a lower frequency. Incandescent light has thermal radiation to cover the pulse.
Bhai ya to led light pr kam. Nahe kar raha hai
only supported tungsten buld
@@Erpankaj925 led light k liye hum kya use karo
50 or 100 w led light
Ok good job s
Street lights working
BD 136 Transistor warking sir plzz telme?
no
why did u use Bd139 ?
Brother your schematic in thumbnail and how do you make in video is different, why do you do that?
Led bulb chal sakta ha ya element bulb hi karamad rahy ga
Video me konsa hai?
@@Erpankaj925 sorry dekha ni tha
Maximum kitny watt ka chal sakta ha bulb is pr 100 watt ya is se kam
@@Shorts_lover12 9 to 100 watt
Sir ji bulb blink kr raha ha kia waja ha working tw perfect ho raha ha pr blink kr raha ha bulb
What is the cost of material (excluding labour charge)to build up this?
Less than 50 rs
But single registor not available in online and single piece ldr price is more that is too around rs60
@@mrinmayrayya1199 why you checking online go offline this Ldr is about 3 rs
Sir kaise banayenge
jaise video mai bataya hai
BTA 16 नही चलेगा क्या sir..... इसकी जगह पे BT136 के बदले...
No
@@Erpankaj925 धन्यवाद sir..... respones के लिए
I'm trying it but not working.
What if I wanted to make it the opposite? light bulb goes on when sensor sees light?
If you want to make it opposite than you watch this video. In this circuit you only need to change relay connection to n/o.
ua-cam.com/video/KD2t7azyRBM/v-deo.html
@@Erpankaj925 thank you but that seems a bit complicated. Is there any way to utilize the BT136 in a simple way like this?
No. You cant change ldr working.
Sir circuit not working tried several times hasto be kept in full sunlight to switch off.
Please send me video in instagram.
Thank you for video .
Isn't this circuit heating up ?
Little bit, but you can place heat sink.
Can we use it as a laser alarm , 220 volts alarm instead of light
Nice one
I support
Ldr koto mm
5mm
BT 136 TRACK Gulo NPN na PNP ETA bolen
abi yaptım ama led ampülde titreme oluyor ne yapmam lazım
English please.
@@Erpankaj925 I did it bro, but the led bulb is flickering, what should I do?
There is another video for stable version of this circuit. Check that video.
@@Erpankaj925 video link please ?
@@enesbilgisayardunyasi ua-cam.com/video/KD2t7azyRBM/v-deo.html
Led bulb not working
How many watts is a 220K resistor?
1/4 w
Sería genial si dieran al final los diagramas
Este es un circuito simple de 3 componentes, no es necesario un diagrama para comprenderlo. gracias por tus comentarios.
5mm ka ldr kam nahi kar raha h
3mm use karo
led bulp pilinking problem
इस सिर्किट को बनाया हु लेकिन 12w में ठीक काम नही कर रहा है.....9W और (100W ग्लास वाला) बस में ठीक से काम कर रहा है...ऐसा क्यों
I try for 0.5w bulb but not working
Use 100watt bulb.
@@Erpankaj925 I want for 0.5w bulb can u help me
Try variable resistance insted of resistance and adjust according load.
@@Erpankaj925 12 led bulb how much residents
Hi sir
Anda ko fire it is not working i bought till rs 200 for this porgect i did dont do like this. Kodi
Go learn some basic english first.
What are you saying. I don't understand you.
👍👍👍
Led बल्ब लगाने पर डिपर कि तरह जल रहा हॆ
Bulb ko ldr se seperate rakho, ldr par light nahi padni chayea.
बहुत प्रयास किए हॆ लेकिन अप डाउन हो रहा हॆ
Mere channel pe ek or video hai automatic light ki vo dekhlo.
No warking
Ford not wark
काम नहीं कर रहा
kam nahi kar raha hai
Kya kam nahi kar raha?
Bom
MANY are saying it does not work. What do you expect - it is a BAD design, BAD construction with no explanation, no notes, no advice
i dont know why people saying not working .i make all the circuit in front off everyone and tested.
@@Erpankaj925 oh dear..... well first LDRs vary a LOT in value and response which your design FAILED to address. Second the construction is TERRIBLE. Third is no explanation or advice.
Just because yours seems to work does NOT mean it is a good design or will work. for others It is a fluke
I feel that in trying to use as few parts as possibel / as simple as a design as possible you are ending up with a bad design. I will look for a simple circuit as well - it is NOT easy - but I do not sacifrice things like reliability and robustness
not work
Doesn’t work
Sir 12 volt ka
Not working with Circuit fake
ITS FATE I WILL TRY THIS😡😡😡
Learn electronic first and then try to make circuit.
Shematic? 👎
blinjung
Not working
🤟🤟🤟
Naucz się lutować.
भैया क्या फेक वीडियो बनाते हो क्योंकि जो आपने सामान लगाया मैंने लगाया वह
Saman ke saath knowledge bhi honi jaruri hai
Fake
what is fake here. can you mention ?
Not working
Not working
Do you have experience in electronic project's
Not working
Not working