I use Wizards Motorcycle wipe down with a Clean Micro Fiber cloth every time I ride also , Been Ridin' since 1968 I currently own a 2013 Yamaha FZ8 all tricked out and I just Love it. Ride Fast BUT Safe!! Enjoy.
@Paul Paul after every ride front, is covered with bugs. If you let it sit for a week or more, it's possible that you left with damaged paint after washing the bike. I usually ride in mountains and cities. Roads in Poland are not the cleanest ones I've ever ridden 😐
Gorgeous bike, but from a detailer's perspective, I think you might benefit from using the wash mitt on the tank/rear fender, then front plastics and then work your way down. You don't wash your cars from the bottom up, right?
Ive got a full custom modified z750 from kawasaki heavy industries ltd .i love to ride but honestly there's nothing more enjoyable than cleaning your motorcycle make her look new an fresh 😊
Can I ask, do you have a breakdown of the mods you've done to your bike? I didn't see any turn signals and I'm curious about your custom carbon pieces and bar mount mirrors.
Step 1 : Spray Chain Cleaner Step 2 : Spray Water Step 3 : Apply Shampoo Step 4 : Clean Wheel Step 5 : Rub vehicle body with a Microfiber Cloth Step 6 : Apply Water Step 7 : Leave it 15 to 20 min. Or if possible apply Drier Step 8 : Apply Chain Lube on Chain and Polish your vehicle body Simple 🤭👍
Hopefully a few pointers that might help you out. Over all good job and nice bike (if its yours). Cleaning the drive chain and wheels first is spot on but why didn’t you lube the chain after its clean and before the wash to protect it? Second the chain looks well too tight which will only cause major problems down the line. Also to help clean the front wheels get a stand. And you have a jetwash wich is fine but why not use snow foam instead of the little hand held canister? Also another bucket with fresh water will aid in keeping the mitt clean, personally i dont like them and go for microfibre cloths. I noticed you cleaned the oil coolers front and then the tank lol.
Very nice bike! Love a superclean bike :). Although i'm not so sure about pressure washing over hubs and the brakes etc...like...all components that need their grease and have washers/o-rings/cartridges... they don't respond well to water being pressured onto them :)
What a good video, I thought that washing the motorcycle with a hose was not good. What do you recommend to remove rust from the motorcycle? all the best
Just use dawn and water to clean chain and bike. Use synthetic gear oil for chain lube (Fort9 did a vid on this). Make sure you use two separate buckets and cloths for upper and lower portion of bike. Done. No need for expensive products that don't do much for you
Nice looking bike. But for love of god wash from top to bottom with mitt and use 2 bucket or at least a rinse bucket technique. Fenders and bottom should be last to prevent scratching from road grime.
That’s a sick Yamaha bike bro!🔥I love the wheel cleaning and using the detail brush to get at all the crevices and intricate areas. BUT there just something about soapy wash mitt action…. Soooo satisfying!💪🏼
@@CleaningTheDirtiest Yes sir. I loved it. I do have a question though. How does one clean a normal timberland boot? Like the ones drake wears on hotline bling😅
I just use WD-40 on chain, it cleans it and leaves thin lubrication film....do it every other ride.....transferred this method over from MX....never have to clean that gunk off my chain anymore....clean and use compressor to blow out as much water as I can....wipe dry I like the lil brush though....especially for wheels
I always try to use chems where physical touch is not necessary to get rid of the muck. Each time you use that brush there's new small scratches developed
What’s the safest cleaner for a satin paint job, I have a 2023 panigale v2 with the white satin paint and am trying to find the best soap and protection for it
Bro, bike was barely dirty at the start....but I get the video. Also, why dry the bike 1st and then use a compressor to spray the wet all around it again. Compressor the bike 1st then dry it with a microfiber cloth. Stay safe on the bike......:)
This is a good wash, but not close to a detail to be honest. First you wouldn't use that power washer to detail, it's way too close and powerful. You would also use 2 buckets for the wash part to make sure you don't scratch and spread dirt, and you missed one of the most important parts of the detail which is protection, no wax/sealant?
Got a feeling some parts carbon dipped. Meaning the parts are dipped in a tank with a carbon transfer floating on the top. My mate has had his cb1000r done, looks very convincing and is way cheaper.
Very nice bike, but it's a make believe v4, unlike Aprilia tuono witch I believe to be a much deeper full bodied soundtrack, can't beat Aprilia, in my humble opinion.
Gotta get me one them Pump former thingies…was thinking since I don’t have an easy water access of using m pump water canister (plastic vision of like what exterminators use) as a clean water rinse ….but wasn’t looking forward to using a bucket of soapy water as main soap application because my bike is old and very dirty, I mean I’d hope mine would look after cleaning g like this did before cleaning 🤷🏼♂️🤦🏼♂️😜….
Man …I just do not appreciate the new front bikini fairing /headlights look compared to my 09 fz1 N with aftermarket puig windscreen … it’s a personal thing I know, but think I’m only one who “doesn’t” like it…rest of bike looks mean to me tho 👍🏼
This is how I clean my MT-10 after almost every ride 😆 If you do it on a daily basis, it's much quicker than you can imagine
I use Wizards Motorcycle wipe down with a Clean Micro Fiber cloth every time I ride also , Been Ridin' since 1968 I currently own a 2013 Yamaha FZ8 all tricked out and I just Love it. Ride Fast BUT Safe!! Enjoy.
mine is collecting dust xD
🤣🤣🤣🤣
That sounds terrible 😆
@Paul Paul after every ride front, is covered with bugs. If you let it sit for a week or more, it's possible that you left with damaged paint after washing the bike. I usually ride in mountains and cities. Roads in Poland are not the cleanest ones I've ever ridden 😐
9:45 omg. Spray everywhere
Gorgeous bike, but from a detailer's perspective, I think you might benefit from using the wash mitt on the tank/rear fender, then front plastics and then work your way down. You don't wash your cars from the bottom up, right?
you make a good point .
Wanted to make the same point! Still liked the video though!
brush is 100% the way to go for small nocks and crannys for sure. maybe if it wasn't a naked bike but it is
As a rider myself, my OCD just loved this video !!!
A clean bike is tops, and feels fantastic to get back on her!!
Beautiful bike by the way 👍
Really!..I know I can't get thru the day without watching someone wash a frickin motorcycle.
Ive got a full custom modified z750 from kawasaki heavy industries ltd .i love to ride but honestly there's nothing more enjoyable than cleaning your motorcycle make her look new an fresh 😊
Is this a NEW ASMR? Cuz is so satisfying!!!! I LOVE IT! Nice bike looks stunning 🔝🤜🤛❤
Most beautiful mt10 I've seen so far. I'm not a fan of the mt10 directly but from the engine. But you put together a really nice motorcycle.
Can I ask, do you have a breakdown of the mods you've done to your bike? I didn't see any turn signals and I'm curious about your custom carbon pieces and bar mount mirrors.
Yes there are turn signlas WATCH 9:06min there is 1 right under the lid for the coolant at the upper radiator
オートバイの洗車上手ですよね。私もこの要領でしっかりやりたいものです。ヤマハMT-10も上品なバイクです。私も好きです。カラーリングもセンスが良く、いつまでも手元に置いておきたい１台です。
Step 1 : Spray Chain Cleaner
Step 2 : Spray Water
Step 3 : Apply Shampoo
Step 4 : Clean Wheel
Step 5 : Rub vehicle body with a Microfiber Cloth
Step 6 : Apply Water
Step 7 : Leave it 15 to 20 min. Or if possible apply Drier
Step 8 : Apply Chain Lube on Chain and Polish your vehicle body
Simple 🤭👍
Hopefully a few pointers that might help you out. Over all good job and nice bike (if its yours).
Cleaning the drive chain and wheels first is spot on but why didn’t you lube the chain after its clean and before the wash to protect it? Second the chain looks well too tight which will only cause major problems down the line.
Also to help clean the front wheels get a stand.
And you have a jetwash wich is fine but why not use snow foam instead of the little hand held canister?
Also another bucket with fresh water will aid in keeping the mitt clean, personally i dont like them and go for microfibre cloths.
I noticed you cleaned the oil coolers front and then the tank lol.
Have a day off mate.
Thank you for showing us how to clean a clean bike. 😂
Good bike wash, just a tip for oiling your chain, heat it up by running the bike in first gear for few mins, best oiling it when the chain is warm 👍🏻
this the best motorcycle asmr! out there lol
Thanks a lot Nigel P! Hope you liked it!
💯
Awesome 😎 super, fantastic but one most important advice: do not apply direct pressure jet on the radiator
Bike lover's just called:- special bike wash😘🥰
Before getting the bike wet it's better to grease up the chain first. A clean and degreased chain builds up oxidation very quickly.
within 30mins?
That's an amazing job That's how I clean My own motorcycle❤
nice that you do cars and motorcycles on your channel! Keep up the good work 💪🏽
This is ONE sick ass bike.
Very nice bike! Love a superclean bike :). Although i'm not so sure about pressure washing over hubs and the brakes etc...like...all components that need their grease and have washers/o-rings/cartridges... they don't respond well to water being pressured onto them :)
Que belleza!!! Te recomiendo que a la cadena le pongas motul C4. Es para alta velocidad.
What a good video, I thought that washing the motorcycle with a hose was not good. What do you recommend to remove rust from the motorcycle? all the best
Just use dawn and water to clean chain and bike. Use synthetic gear oil for chain lube (Fort9 did a vid on this). Make sure you use two separate buckets and cloths for upper and lower portion of bike. Done. No need for expensive products that don't do much for you
Detailing and rain goes together.
That's a beautiful beautiful machine.
That red looks simply stunning
Just made me get up and clean my bike dope bike
with this amount of work, probably started rainning within a few minutes
Nice looking bike. But for love of god wash from top to bottom with mitt and use 2 bucket or at least a rinse bucket technique. Fenders and bottom should be last to prevent scratching from road grime.
That’s a sick Yamaha bike bro!🔥I love the wheel cleaning and using the detail brush to get at all the crevices and intricate areas. BUT there just something about soapy wash mitt action…. Soooo satisfying!💪🏼
Thanks bro! Good to see you like it!
just got an MT03 so im glad i have this guide on how to properly detail it
Thanks bro giving me inspiration to get back to work tomorrow wonder what cool bikes I am going to be detailing and working on ☺️
The dedication and the ❤.
Thank you, hope you liked it ♥️
@@CleaningTheDirtiest Yes sir. I loved it. I do have a question though. How does one clean a normal timberland boot? Like the ones drake wears on hotline bling😅
This Video is perfect and beuthiful Bike 👏👌👍
Bikes on another level! Well put together video and i will be doing similar to my new bike tomorrow! Enjoy that beast! 👍🏻🙌😎
very nice color scheme…would be perfect with real carbon swing arm and frame…a dream
I just use WD-40 on chain, it cleans it and leaves thin lubrication film....do it every other ride.....transferred this method over from MX....never have to clean that gunk off my chain anymore....clean and use compressor to blow out as much water as I can....wipe dry
I like the lil brush though....especially for wheels
I always try to use chems where physical touch is not necessary to get rid of the muck. Each time you use that brush there's new small scratches developed
Beautiful bike! Im still waiting for someone to make a R1 engine and trans swap kit for the MT10
i love my bike when I clean myself
Great looking bike 👌
Beautiful looking bike. Very relaxing watching a bike being cleaned. Gonna detail mine now as soon as it stops raining. 👍🏻
Thank you 🙌
Good Luck!!
My guy doing bottom to top with the washmitt O.o
Slick bike!
thats my character and roles and responsibilities 😆😆😍😍😆😆😜😜😜 every sunday and sometimes monday
stunning bike
This bike will definitely take care you😆 good stuff, nice MT as well
I need that bottle that throws foam 😂
Nice video and great-looking bike. What bar end mirrors are you running?
do you use iron remover on wheels on bikes like cars?
man, gold front forks would make this bike look even better i think, still very nice as is though
I came from your "short" of this bike to watch the full video. Noice! 👍
So satisfying 🤤❤️
That bike is cleaner than my plate 🤣🤣🤣
Very nice built! ❤
What front spoiler/ motor cover do you use? Can you send a link pls?
Not sure if using a powerful jet wash on a bike is beneficial to bearings ?
First video I've watched, so I dont know if you usually do this. But you should really use some nitril gloves
Sehr schönes Motorrad 😘 👍 Gefällt mir sehr gut!
What’s the safest cleaner for a satin paint job, I have a 2023 panigale v2 with the white satin paint and am trying to find the best soap and protection for it
So wholesome
Wouldn't a pressure washer damage seals?
tq for video how cleaning motorcycle
Wow cool bike bro
This is absolutely mental. Who got time for this and also, why ? Are you putting it in a showroom ?
hello, You did install a quickshifter on the downside, i cant find part number, maybe you know?
Bro, bike was barely dirty at the start....but I get the video. Also, why dry the bike 1st and then use a compressor to spray the wet all around it again. Compressor the bike 1st then dry it with a microfiber cloth. Stay safe on the bike......:)
Wat een bruut apparaat!! heb zelf een Mt07 Red Carbon :D
Your Tank, is the Red Painted or Wrap?
Isnt it bad to use power washers and air compressors due to cables etc?>
I have an 01 FZ1. almost all carbon with violet pearl/clear. I an relate
gentle snow foam Gsf where u can buy that online website
Were you bye the duck front for this mt10 . Im from Portugal i have one and i like your front . Pls telme
Mods for the bike?
This is a good wash, but not close to a detail to be honest. First you wouldn't use that power washer to detail, it's way too close and powerful. You would also use 2 buckets for the wash part to make sure you don't scratch and spread dirt, and you missed one of the most important parts of the detail which is protection, no wax/sealant?
whats that lower fairing on the bottom of the bike?
The title should be: "How to clean a clean bike"😂
Bro, best cleaning job on a motorcycle i've ever seen! Is that your mt 10? Where did you order the carbon fiber from? It's simply gorgeous!
Got a feeling some parts carbon dipped. Meaning the parts are dipped in a tank with a carbon transfer floating on the top. My mate has had his cb1000r done, looks very convincing and is way cheaper.
Very nice bike, but it's a make believe v4, unlike Aprilia tuono witch I believe to be a much deeper full bodied soundtrack, can't beat Aprilia, in my humble opinion.
We’re is the belly panel from ?
Why not if you’ve got your bike as a hobby. I use my bike as a commuter so cleaning every ride would be silly ;)
5:10 Most definitely a Husqvarna nuda 900
Nice bik btw👌❤️
more videos like this😍😍
That is fucking sick dude.. Glad you get to drive such a nice bike, you deserve it bro! Keep up the good content.
Gotta get me one them Pump former thingies…was thinking since I don’t have an easy water access of using m pump water canister (plastic vision of like what exterminators use) as a clean water rinse ….but wasn’t looking forward to using a bucket of soapy water as main soap application because my bike is old and very dirty, I mean I’d hope mine would look after cleaning g like this did before cleaning 🤷🏼♂️🤦🏼♂️😜….
Man …I just do not appreciate the new front bikini fairing /headlights look compared to my 09 fz1 N with aftermarket puig windscreen … it’s a personal thing I know, but think I’m only one who “doesn’t” like it…rest of bike looks mean to me tho 👍🏼
Beautiful
You meen cleaning. Jeezus
Hi Can you please tell me what is your brake and cluth levers, maybe link from where did you buy them, thank you in advance.
Those appear to be Pazzo levers. Very high quality, I can attest to that.
Masterpiece 👌
Gaaf om te zien 👌
Isn't it supposed that if you get the chain wet it breaks down?
No you lube it up after cleaning
@@NickForsberg85 all right 🏍💧💦⚙️⛓👍🏻
Dónde compras el cepillo para tallar el faro!?
If megatron was a motorcycle, it would be a mt10
Mmm the good groundwater...
Coisa linda… parabéns.
Gostei eu também sou perfeccionista
linda moto :D
Where you buy this belly pan?
Awesome
Usi un solo pennello per tutto?
I thought he's KR$NA 🥂