I'm sorry, but did I hear you correctly when dude said roughly $500 for both??????😮 Man, I've owned 2 titan xd 5.0 trucks since 2016, and I've never paid more than $267 for fuel filters, separator, air filter, cabin filter, oil filter and 3 gal of oil! People be price gouging or what, lol!? Best thing I ever could've done for both trucks is buy aftermarket like amsoil products, rotella t6 15w40 synthetic and I change my oil every 5,000 and fuel filters at 10,000. Trucks have never let me down aside from both needed swingvalve actuators replaced.
Nissan no longer sells the cap separately. Z1 off-road has made a billet replacement, that is your only available option other than buying a new high pressure fuel filter housing complete from Nissan
I've never seen one come off that easy, I use a cheater bar an filter wrench to remove mine the socket never works just strips on primary an secondary filter
Amsoil 10w 30 diesal oil all the way. Same with the filter. One more thing I'd add to this video is to lube the new o-rings before you put them on. You can roll them and get air in the system if you don't and the truck won't start for shit. Ask me how I know :)
Thank you for the info!
For sure thanks for watching
What Micron are these filters that you are using.
What did he use to spray out the lower filter housing?
Brake cleaner
Do you know what the torque specs where for when he tighter back the fuel filter caps?
Not sure would have to find out
Stage 1 is 21lbs stage 2 18lbs
Why dont you take the gas cap off to relieve pressure from said 2nd fuel filter opening???
I'm sorry, but did I hear you correctly when dude said roughly $500 for both??????😮
Man, I've owned 2 titan xd 5.0 trucks since 2016, and I've never paid more than $267 for fuel filters, separator, air filter, cabin filter, oil filter and 3 gal of oil!
People be price gouging or what, lol!?
Best thing I ever could've done for both trucks is buy aftermarket like amsoil products, rotella t6 15w40 synthetic and I change my oil every 5,000 and fuel filters at 10,000.
Trucks have never let me down aside from both needed swingvalve actuators replaced.
Yeah, 550 for my diesel Nissan. I’ll be doing the rest of them from now on
29,000 psi? And that plastic cap holds that kind of pressure?
That plastic only has lift pump pressure, not rail pressure. It could be 50 pounds. Rail pressure is after this filter.
Trying to order the cap for the top fuel filter but can’t find it. Any suggestion?
Nissan no longer sells the cap separately. Z1 off-road has made a billet replacement, that is your only available option other than buying a new high pressure fuel filter housing complete from Nissan
This is cringe...putting the new filter face down in dirty drain pan and then not even wiping it clean before installing.
My thoughts exactly
Top filter doesn’t have a sensor?
I've never seen one come off that easy, I use a cheater bar an filter wrench to remove mine the socket never works just strips on primary an secondary filter
The filters don’t get 29,000 psi. Plastic would not hold that. The fuel rail sees those pressures, which happens after the filters.
29,000 PSI. That would be a cool trick.
What size is the socket?
29mm
Regular oil in an XD? No way!
Amsoil 10w 30 diesal oil all the way. Same with the filter. One more thing I'd add to this video is to lube the new o-rings before you put them on. You can roll them and get air in the system if you don't and the truck won't start for shit. Ask me how I know :)
or 1 1/8 inch, same
You missing more oil buddy
Oil is almost 3 gallon You're put in 2
2.5 gallons is 10 quarts, he said it right.
This video is bull it doesn't work that easy belive me everything is plastic an sucks
How do you prime the fuel filters without starting the truck?
Turn the truck to ignition II, about 5 times
Just did it - don't be afraid if it warns you about low fuel pressure - just cycle through 5 times and you should be good to go!