So glad to hear that Taylor! Please let me know if you have any questions about the build not covered in the video and I would be happy to answer them!!!
Thank you so much brother man!!!! I really like the wheel/brake combo too, another UA-camr, Kalvin Malli, had the same wheel/brake setup and I wanted to give it a try! Thank you for the compliments man and I hope your build is treating you well!!!😀
@@TunerFaction lol they’re 100% not going to have enough grip. My 2j swapped S13 couldn’t put any power down until I went to a 275 NT555r tire on the rear. I’m making about 570 to the wheels.
@@olajimimark oh frick, I'm also making 570 to the wheels... gosh darn it guess I'll have to be looking into some new wheels and tires for the rear once the wallet can handle that kind of damage😂
Great catch my man!!! I forgot to film it for this video but I did upgrade the master cylinder to a Z32 master cylinder. I was planning to add a brake bias valve if I'm locking up too easily!
Thanks boss I'm glad your enjoying them!! And I'm sorry I'm not quite following, you are asking if the bleeder screws can go where the brake lines attatch to the caliper?
@@TunerFaction the line you swapped it the bleeder with had two openings. Did you just plug up the other side? Or can I put the bleeder screw in the backside of the caliper and plug the front?
@@donjuan2oo6 ohhhhh I'm following you! Ok so I don't show it well in the video but there are actually 2 bleeder screws on the caliper. So basically one bleeder goes on the outside and one bleeder goes on the inside. I didn't show it well in the video, sorry!
Hey boss thanks for the comment! Here is a link to some drilled/slotted rotors that will work: www.enjukuracing.com/products/p2m-drilled-slotted-front-rotors-for-nissan-350z-g35-03-05.html?gad_source=1&gclid=Cj0KCQiA84CvBhCaARIsAMkAvkLjhH2hAefSirkUsyr-XJe14YvUceW8tmnHmp-Ptz_On7T7i3OH_UsaAgoAEALw_wcB Basically, any 350z front rotors will work so if you just typed "350z drilled and slotted front rotors" any of those options will work!
Thank you!🙏🏽 you are a goat! You think I should click the brembo box when ordering? Noticed it has a option for non brembo and brembo just making sure cause I’m not sure if they are asking for the 350z brembo caliper style
Im in the process of doing this exact 2jz swap on my s14 and your videos have been so incredibly helpful!
So glad to hear that Taylor! Please let me know if you have any questions about the build not covered in the video and I would be happy to answer them!!!
Those wheels and brakes look so GOOD!!!!! Congrats mate keep grinding
Thank you so much brother man!!!! I really like the wheel/brake combo too, another UA-camr, Kalvin Malli, had the same wheel/brake setup and I wanted to give it a try! Thank you for the compliments man and I hope your build is treating you well!!!😀
awesome video man keep up the good work!!
Thank you so very much brother!! Hope you are doing awesome!
I'd recommend a 17x 9.5 +38 for the rears so you can run meaty tires(265-275 width) since you're making decent power. They fit without spacers
Good to know man thanks! If these 245's I have on the rears are too slippery with the power I'll have to look into those 17 x 9.5 +38's!
@@TunerFaction lol they’re 100% not going to have enough grip. My 2j swapped S13 couldn’t put any power down until I went to a 275 NT555r tire on the rear. I’m making about 570 to the wheels.
@@olajimimark oh frick, I'm also making 570 to the wheels... gosh darn it guess I'll have to be looking into some new wheels and tires for the rear once the wallet can handle that kind of damage😂
Those brakes should bring the 2jz to a screeching halt
Oh dude FOR SURE! I wouldn't be surprised if these brakes caused the earth to stop rotating!😂
Excellent "description." Cadillac parts on a Nissan...crazy!
Thanks for the autocorrect😂
Also have to add Toyota engine, and GM transmission😂
@@TunerFaction a true Frankenstein.
@@legomancanswim4838 😂
Any plans to upgrade the master cylinder or install a brake bias valve? When I installed the same kit I had easily locked up the fronts.
Great catch my man!!! I forgot to film it for this video but I did upgrade the master cylinder to a Z32 master cylinder. I was planning to add a brake bias valve if I'm locking up too easily!
Love the videos. Just a quick question, can you put the bleeder screws on the inside of the caliper?
Thanks boss I'm glad your enjoying them!! And I'm sorry I'm not quite following, you are asking if the bleeder screws can go where the brake lines attatch to the caliper?
@@TunerFaction the line you swapped it the bleeder with had two openings. Did you just plug up the other side? Or can I put the bleeder screw in the backside of the caliper and plug the front?
@@donjuan2oo6 ohhhhh I'm following you! Ok so I don't show it well in the video but there are actually 2 bleeder screws on the caliper. So basically one bleeder goes on the outside and one bleeder goes on the inside. I didn't show it well in the video, sorry!
@@TunerFaction ahh ok. Appreciate it. Got yourself a new sub
@@donjuan2oo6 hey thanks man I really appreciate that!!! Grateful to have you along for this project!
When you want a ham radio in that car hit me up
Oh bro! Next video is gonna be titled "240sx HAM Radio Install w/ Xander | Ep. 30"😂
Hey what rotor would I use if I wanted to run this same set up but drilled and slotted? Do you think you could send a link or part number? Thanks
Hey boss thanks for the comment! Here is a link to some drilled/slotted rotors that will work: www.enjukuracing.com/products/p2m-drilled-slotted-front-rotors-for-nissan-350z-g35-03-05.html?gad_source=1&gclid=Cj0KCQiA84CvBhCaARIsAMkAvkLjhH2hAefSirkUsyr-XJe14YvUceW8tmnHmp-Ptz_On7T7i3OH_UsaAgoAEALw_wcB
Basically, any 350z front rotors will work so if you just typed "350z drilled and slotted front rotors" any of those options will work!
Thank you!🙏🏽 you are a goat! You think I should click the brembo box when ordering? Noticed it has a option for non brembo and brembo just making sure cause I’m not sure if they are asking for the 350z brembo caliper style
@@bryansantos2465 hey don't mention it! I don't believe you need to select the Brembo option because the normal 350z rotors work with the CTSV brakes!
This guy thinks he is some engineer or something. Get a real job!!!!!
WOOOOOOW kid how about you stop working on submarines and work on something actually cool like jet engines🫨