Thanks for watching the video everyone! Special thanks to Mermaid Zelda for having me at her pool! Make sure you watch her videos if you haven't! Have you used any different monofins in a FinFolk fabric? Let me know in the comments below!
I've been wondering about different monofins in the finfolk fabrics! (I don't have one though) And that pool is AMAZING! I'd be forever sitting on those rocks!
❤ this was an amazing video. I like your effort, your descriptions. It really help me make a decision. I really appreciate you taking the time to make your videos 🧜
Really like this video! I am looking for a new monofin for my new finfolk fabric and this really helps! A friend of my uses the Hydra monofin in her tail. I did swim in it once and it wasn't a bad experience. It was swimming pretty good and it was better than my experience with the mahina monofin in my current finfolk fabric tail. The only problem I had with is is that is quite long. For short mermaid/merman wouldn't that be a problem I think but for long mermaid/merman it will make the tail fit low on the hips. A shorther monofin will gif you some more lenght on top of the tail becaus you can push the monofin a little more down in to the fluke. Hope that all of this makes sense 😅
This was very helpful, I wish there was a video doing the same for the sea nymph fluke though. My foil is wayyy too loose in the fluke and it makes me anxious swimming in it
Awsome. I used binge watch your videos before getting my first tail and monofin. I would have never thought of putting a silicone fin in the finfolk, but now that you did I was wondering if it would work without the vinyl. Just because I float a lot and heard that the silicone ones don't. Can anyone answer this?
You could do it but these tails already have so much drag, putting a silicone fin and taking out the vinyl will make it even worse. These tails will also float more anyways bc neoprene is “floaty”. Instead of a silicone fin I’d suggest getting a weight belt. Obviously do your research, be careful and don’t drown but you can find scuba weight belts and decorate them to match your mermaid aesthetic without sacrificing the beauty and performance of the tail🙂
nice video en it's a very good video of which monofin fits in the finfolk tails. defenly gona use this advise. And i use the hydra kat monofin in my finfolk andromeda between the vinyl casing. It swims amazing and it's still my favorite monofin to use in the finfolk tails except for the tails with the lotus fluke.
I have exactly the same finfolk fabric tail and I use the mermaid Kat Hydra monofin with the vinyl casing. Works absolutely fine. And it is not impossible to insert the monofin imo :) though I don't use the srews.
Hello ! I'm very happy to see this video 😭 I just received my first finfolk tail as a present but with a finis wave monofin (I think is the new name of finis tempo ?) How you modified your finis tempo ? There is a video ?
A friend of mine tried to put my Hydra in her Finfolk and it did not work because it was 1 to 2 cm too long. Now I own a monofin, where I need a M2M tail.
Would a finis wave Monofin work in a Finfolk fabric tail?? I am going to be getting a Finfolk fabric tail soon and would love to know if that one is good to use!
Any tips on what glue to use? I have a lot of trouble opening my eyes underwater, so I’m planning to make a carnivalesque mask- matches with the character- out of some swim goggles
Hello there! I have a little problem if anyone would be willing to help. I have bought a Finfolk tail from a friend and she accidentaly threw away the transparent fluke, she thought it was just ''trash''... 4 years later she sold me the tail and now I am without it and swimming doesn't look that great without it. Any tips or advices what to do, like I can buy some material and make my own or is there a way to order and buy? I come from a very small country so shipping costs are high and you wait forever... Thank you very much for any help! *****bubble kisses***
I’d like if the finfun works bicouse i have one. You should try finis mermaid and aquarius. I have a Aquatail tail also that have simular monofin like finis mermaid.
I been looking at these tails a lot lately and I was wondering would you consider practicing in the fins mono fin first then put it in the tail? Because you know they aren't like fin fun or other tails were you can slip right out of them
I have the same finfolk in the video and I use it with the linden. And I personally would definitely recommend to be a strong swimmer with the monofin first. And when you finally use the finfolk, I would like to have some around and the first few times take it easy, stay close things you can grab onto early and be careful not to get too tired, getting out of the tail still can require some energy 😅
I use the hydra for my silicone tail but I have not tried it in a fabric tail. I think it's a little floppy for my liking. I am trying to fine one that is a similar shape but strong.
So last summer I took my finfolk to the beach, I forgot to rinse it off for a day or two but did soon after. Then I wrapped it in a towel and it sat in storage for a while. When I took it out again the coloring on the base of the fluke was spotty, like grainy spotty. It could be that I waited too long to rinse it but I don’t think that’s the case because it would have been spotty then but it wasn’t. Idk why it’s doing this and I can’t find anything else online who has had this happen. Anyone know anything?? I can’t believe it but I forgot the name of the design I got, it started with an A, it’s the white and blue patterned one from the 2nd gen.
You should make your own series show on UA-cam like about you being a mermaid and meeting people I would definitely watch it all the time so please make a UA-cam show
Hello How are you? I have a rainbow tail and there are a few Others that I would like I might ask for them for my birthday, but yeah, there really pretty too, and I dont get to use my tail because I don't have an ingraved pool, and it's not hot enough to blow the pool up yet, but when I can, I will definitely use it when I can because when I go swimming, I swim as a mermaid without the tail because I I was just born to like I'm one of the chosen ones. But yeah, I dont use it enough, and I really want to use it more, so hopefully, I will be able to do the future
So the monofin goes inside a piece of plastic for these fancier tails. These are the ones I really like the look of. But I'll make sure I like swimming in a tails before I invest in one of these.
FinFolk, stopped using the plastic screws to hold the monofins in place when they started making all the tails in house and switched to Velcro. They were used in tails leading up to the summer 2020 release.
Interested!!!!! Im hosting my local Mermaid Camp in the 2nd week of July.. All if my participation is expected..they're lots of excitement about it and Im expected a good #.. I need information re: "the Fabric" (Fin folk fabric) i want to offer instructions on making the actual Mermaid.....Also 👍☝️👆 me in the proper direction to get that starter...❤ Im welcoming any suggestions or opinions (be nice) re: the Mermaid Camp all together ❤️ 💓 💖 💗 ❤❤❤❤❤❤❤❤
The other girl is me!! I made 2 of my own separate videos on my channel from this swim! I tested different monofins inside mertailor whimsy tails where I do lots of talking haha
Thanks for watching the video everyone! Special thanks to Mermaid Zelda for having me at her pool! Make sure you watch her videos if you haven't! Have you used any different monofins in a FinFolk fabric? Let me know in the comments below!
Nerdmaid Faith fin fun mono fins work good
Dear Nerdmaid faith I want to know if a free diving fin will fit in a finfolk!!!
Does a free diving fin work in finfolk???
I was inspired to become a mermaid because of you🧜♀️🐚
I really want to know how good aqua mermaid tails are, because the only reviews on aquamermaid are made by aquamermaid
The mermaid urges are hitting strongly today. I wish the pools were open.
Avery Hamilton bay
Yeeees, I wanna use my tail so bad but I can’t because the pools are closed
Right!!
Pools over here don’t even allow fins. Makes me wanna cry because I can never use my tail 😭👍🏻
I've been wondering about different monofins in the finfolk fabrics! (I don't have one though) And that pool is AMAZING! I'd be forever sitting on those rocks!
I remember watching mermaid Zelda's video and WONDERING WHERE YOURS WAS HAHA! This was womderful.
I too am a mermaid who is blind without glasses and I’d love to know how you keep your glasses from falling off in the water
hers are probably just on the tighter side, but you can attach a strap made for swimming with glasses! they have them on amazon and in eyeglass stores
Two of the best mermaids in the world! Just great to see you two swimming again. :)
I got my first fabric and silicone tail because of you
❤ this was an amazing video. I like your effort, your descriptions. It really help me make a decision. I really appreciate you taking the time to make your videos 🧜
Great video! Super informative and helpful!
Wow you are just amazing!!! You inspired me to become a mermaid!! You make it look so magical!!
I appreciate how you followed through with monofins you said you would try.
Ahhh thank you! I do try to be thorough, which is why this video took me soooo long to make!
@@NerdmaidFaith Understandable.
Really like this video! I am looking for a new monofin for my new finfolk fabric and this really helps! A friend of my uses the Hydra monofin in her tail. I did swim in it once and it wasn't a bad experience. It was swimming pretty good and it was better than my experience with the mahina monofin in my current finfolk fabric tail. The only problem I had with is is that is quite long. For short mermaid/merman wouldn't that be a problem I think but for long mermaid/merman it will make the tail fit low on the hips. A shorther monofin will gif you some more lenght on top of the tail becaus you can push the monofin a little more down in to the fluke. Hope that all of this makes sense 😅
I love how she always swims with her glasses on
does anyone know if the finfun elite monofin would fit in a finfolk tail?
Do definitely love the finis shooter 😍👍
I am in love with the design of this pool, I honestly couldn’t focus on the video lmao ♥️
Who else loves her videos❤️
This was very helpful, I wish there was a video doing the same for the sea nymph fluke though. My foil is wayyy too loose in the fluke and it makes me anxious swimming in it
I love your videos!
I love mermaid and watched All your videos and inspaiared me to be a mermaid
Awsome. I used binge watch your videos before getting my first tail and monofin.
I would have never thought of putting a silicone fin in the finfolk, but now that you did I was wondering if it would work without the vinyl. Just because I float a lot and heard that the silicone ones don't.
Can anyone answer this?
Well the whole idea of a finfolk is a monofin and vinyl. Why not check out mertailor if you are looking for silicone fins.
Now that I see the vinyl, I'm tempted to try it with my other monofin
You could do it but these tails already have so much drag, putting a silicone fin and taking out the vinyl will make it even worse. These tails will also float more anyways bc neoprene is “floaty”. Instead of a silicone fin I’d suggest getting a weight belt. Obviously do your research, be careful and don’t drown but you can find scuba weight belts and decorate them to match your mermaid aesthetic without sacrificing the beauty and performance of the tail🙂
I wonder if you made another screw hole to hold in some of the other fins, or your prefered fin
I loveeee the meermaid tail its sooo beautyful (the costume)
I got a fin fun mermaid tail it is AUSSIE GREEN! and i love it so much
nice video en it's a very good video of which monofin fits in the finfolk tails. defenly gona use this advise. And i use the hydra kat monofin in my finfolk andromeda between the vinyl casing. It swims amazing and it's still my favorite monofin to use in the finfolk tails except for the tails with the lotus fluke.
Does the shooter monofin come in a small size? I only see medium and up on the finis website
I have exactly the same finfolk fabric tail and I use the mermaid Kat Hydra monofin with the vinyl casing. Works absolutely fine. And it is not impossible to insert the monofin imo :) though I don't use the srews.
Ahh thank you so much for the info! Do you use the one at the bottom at all or no?
Where I can buy th vinyl ( the big "invisible tranpaent fin" that you put in the finfolk tail)
Ha! I’m mermaid Destiny! Thanks for these videos! I do watch multiple mermaids! I’m new tho...
Do you know if the mertailor fantasea fin 1 feeds on the fin fun fabric tail?
Could we get an updated video where you test the Lucia fish fin?
Hey :) Is the finis tempo same size as the rapid or the wave - can't find the "tempo" online. Greets :)
Hello ! I'm very happy to see this video 😭 I just received my first finfolk tail as a present but with a finis wave monofin (I think is the new name of finis tempo ?) How you modified your finis tempo ? There is a video ?
I stubbed upon your channel when I was looking for stuff about
Mermaid tails now my dad got me a mermaid
tail
When did she test Aquamermaid mono fin this video? Do I keep missing it?
A friend of mine tried to put my Hydra in her Finfolk and it did not work because it was 1 to 2 cm too long.
Now I own a monofin, where I need a M2M tail.
Would a finis wave Monofin work in a Finfolk fabric tail?? I am going to be getting a Finfolk fabric tail soon and would love to know if that one is good to use!
Were did you bye the Loreena Fluke ?
Any tips on what glue to use? I have a lot of trouble opening my eyes underwater, so I’m planning to make a carnivalesque mask- matches with the character- out of some swim goggles
E6000 is what I use. I make jewelry and shell tops. It's multi surface, waterproof, and super tough.
💖I still love your hair 💖
Hello there! I have a little problem if anyone would be willing to help. I have bought a Finfolk tail from a friend and she accidentaly threw away the transparent fluke, she thought it was just ''trash''... 4 years later she sold me the tail and now I am without it and swimming doesn't look that great without it. Any tips or advices what to do, like I can buy some material and make my own or is there a way to order and buy? I come from a very small country so shipping costs are high and you wait forever... Thank you very much for any help! *****bubble kisses***
Cool
I’d like if the finfun works bicouse i have one.
You should try finis mermaid and aquarius. I have a Aquatail tail also that have simular monofin like finis mermaid.
Where do you get the socks for the fins and the wscale wrist covers!! I enjoyed watching uou swim!!
I got the fin socks from Amazon and the bracers are from Shop Vancouver mermaid
What monofin do you recommend
I have to use a Minos mono fin because I have size 13 (15 female) feet. will one fit?
I been looking at these tails a lot lately and I was wondering would you consider practicing in the fins mono fin first then put it in the tail? Because you know they aren't like fin fun or other tails were you can slip right out of them
I have the same finfolk in the video and I use it with the linden. And I personally would definitely recommend to be a strong swimmer with the monofin first. And when you finally use the finfolk, I would like to have some around and the first few times take it easy, stay close things you can grab onto early and be careful not to get too tired, getting out of the tail still can require some energy 😅
PLEASE try a free diving fin with a finfolk!!! I need to see if it will fit!!
I use the hydra for my silicone tail but I have not tried it in a fabric tail. I think it's a little floppy for my liking. I am trying to fine one that is a similar shape but strong.
So last summer I took my finfolk to the beach, I forgot to rinse it off for a day or two but did soon after. Then I wrapped it in a towel and it sat in storage for a while. When I took it out again the coloring on the base of the fluke was spotty, like grainy spotty. It could be that I waited too long to rinse it but I don’t think that’s the case because it would have been spotty then but it wasn’t. Idk why it’s doing this and I can’t find anything else online who has had this happen. Anyone know anything?? I can’t believe it but I forgot the name of the design I got, it started with an A, it’s the white and blue patterned one from the 2nd gen.
Thanks so much Faith, the mermaid Linden rec just saved my bank account 😂
Can you please review Shellowmermaid
Me too want
If genuinely hurts my heart that Uk pools don’t allow the use of tails, monofins or flippers 😭 I wish I could do this
Any one know of any reviews for aquariusmermaid tail skins?
I wish i had a marmaid tael now
You should make your own series show on UA-cam like about you being a mermaid and meeting people I would definitely watch it all the time so please make a UA-cam show
Where did you get that mermaid tail from
Fin folk productions
I have a fin fun tail :D
Lucky!!
Same, I’m planning on getting another one
Lucky!!!🥺🥺
Which one?
Lucky
Where can I find the blue tail at 10:48?
Mertailor 💙
When is the next tail tea time?
Does the fantasea 3 fit in a finfolk?
Nope!
Hello How are you? I have a rainbow tail and there are a few Others that I would like I might ask for them for my
birthday, but yeah, there really
pretty too, and I dont get to use my tail because I don't have an ingraved pool, and it's not hot
enough to blow the pool up yet, but when I can, I will definitely use it when I can because when I go swimming, I swim as a mermaid without the
tail because I
I was just born to like I'm one of the chosen ones. But yeah, I dont use it enough, and I really want to use it more, so hopefully, I will be able to do the future
I missed a video premiere AGAIN
I wish am gana buy that we dont have enaf many to buy
Is there any good monofins and mermaid tails under 15$ ?
definitely not, unless you get one from a scamming site and they give you an extremely low quality tail that tears easily and such
I have a finfun tail im a starter and wanna be a professional one day
Hola
How mach i. Relly want that soso bad but my. Mom can,t buy me for my birthday
So the monofin goes inside a piece of plastic for these fancier tails. These are the ones I really like the look of. But I'll make sure I like swimming in a tails before I invest in one of these.
Never heard of the mermaid tails with screws
FinFolk, stopped using the plastic screws to hold the monofins in place when they started making all the tails in house and switched to Velcro. They were used in tails leading up to the summer 2020 release.
Hello
Hey~
I wish i hade like that i wish someone hive a marmaid tail
How.
Please see this Faith and tell me how.
HOW DO YOU SWIM WITH GLASSES FOR ME THATS LIKE IMPOSSIBLE
I'm 42 and wish i could be a mermaid
I’m 42 and am a mermaid. Anyone can be!! 😁
dont let anyone stop u!! fun doesnt have an age limit :D!
I'm hating on that ONE person that had a thumbs down
Interested!!!!! Im hosting my local Mermaid Camp in the 2nd week of July.. All if my participation is expected..they're lots of excitement about it and Im expected a good #.. I need information re: "the Fabric" (Fin folk fabric) i want to offer instructions on making the actual Mermaid.....Also 👍☝️👆 me in the proper direction to get that starter...❤ Im welcoming any suggestions or opinions (be nice) re: the Mermaid Camp all together ❤️ 💓 💖 💗 ❤❤❤❤❤❤❤❤
HOW COMEV THE OTHER GIRL DIDNT TALJK
The other girl is me!! I made 2 of my own separate videos on my channel from this swim! I tested different monofins inside mertailor whimsy tails where I do lots of talking haha
I had to cut down most of the banter in favour of the information, but yes, see her videos!!
Wer poor wer not rich
A mermaid is not music😡😡😡😡😵😳