Thanks for the video, did you do anything about the temperature ? I don't literally mean PID, but any small changes or tips for temperature? Device temperature is not hot enough for espresso
The temperature is not high enough, so turn on the power and press the steam button. When steam comes out, extract a little water to adjust the temperature. it is a thermoblock, not a boiler, there is no pid effect.
@@mac-coffee thanks, if i press steam button and wait until the light become steady, then press the steam button again and extract quickly would it be hotter ?
@@Arashasadi23 When you press the Steam button, you hear a tick-tock sound. The tick-tock sound heats up the temperature. If steam comes out, the temperature is high enough.
Take out the spring in the opv device. Because the spring is elastic, it is difficult to press it with your hand as in the video. However, there are several ways to reduce the spring's elasticity. For example, I put a spring between thick books and went up on top and pressed it with my weight to reduce the elasticity. When the elasticity is reduced, the pressure of the crm3605 does not increase by more than 11 bar. Too high pressure does not help with extraction. The chances of the extraction failing are reduced.
@@mac-coffee Wow, I was ready to give up on this machine, after 6 months of rather harsh espresso, no mods reference and ready to move on to affordable machine that has a mods community. But now I feel enlightened and ready to make change on my faith or at least do something about it. Thank you sir
Sir will the pressure be controlled if i tighten the screw thats in the middle of the opv inside the red sticker? Or i should take out the spring and compress it?
![[홈카페] CRM3605+ (플러스) OPV 개조하기!](http://i.ytimg.com/vi/HIINWGMSM7Y/mqdefault.jpg)
CRM3605 사려다가, 보일러 문제가 있다고 하여서 보랄 제품을 구입했는데.. CRM3605에는 3벨브에 OPV에, 58미리에 여러가지로 장점이 많은 제품이네요.. 잘 보고 갑니다..
ㅎㅎ 보일러는 기다리면 온도 올라와요 ㅎㅎ 예열이 다 안됬는데 다돤척하는게 문제인데 표사 무시하구 딸깍딸깍소리 안날때까지 기다린 후 물흘리기 한번 해주고 추출하면 괜찮습니다 ㅎㅎ
Thanks for the video, did you do anything about the temperature ? I don't literally mean PID, but any small changes or tips for temperature? Device temperature is not hot enough for espresso
The temperature is not high enough, so turn on the power and press the steam button. When steam comes out, extract a little water to adjust the temperature. it is a thermoblock, not a boiler, there is no pid effect.
@@mac-coffee thanks, if i press steam button and wait until the light become steady, then press the steam button again and extract quickly would it be hotter ?
@@Arashasadi23
When you press the Steam button, you hear a tick-tock sound. The tick-tock sound heats up the temperature. If steam comes out, the temperature is high enough.
Thanks a lot for the answer bro it helped.
Hi, did you make an alteration on that opv spring and how effective it change the brew pressure?
Take out the spring in the opv device. Because the spring is elastic, it is difficult to press it with your hand as in the video. However, there are several ways to reduce the spring's elasticity. For example, I put a spring between thick books and went up on top and pressed it with my weight to reduce the elasticity. When the elasticity is reduced, the pressure of the crm3605 does not increase by more than 11 bar. Too high pressure does not help with extraction. The chances of the extraction failing are reduced.
@@mac-coffee Wow, I was ready to give up on this machine, after 6 months of rather harsh espresso, no mods reference and ready to move on to affordable machine that has a mods community. But now I feel enlightened and ready to make change on my faith or at least do something about it. Thank you sir
@@mac-coffee Sir, after compressing the spring, does it need to stretch to the original length? Thank you
@@andreasidarto7822 Just press the spring to reduce the elasticity. There is no need to go back to the original.
@@mac-coffee I did it, I still need to observe this machine behaviour after the mod and therefore adjust the way I make espresso. Thankyou sir
Sir will the pressure be controlled if i tighten the screw thats in the middle of the opv inside the red sticker? Or i should take out the spring and compress it?
take out the spring and compress
yes it will change the pressure. The excess water will drain to the drip tray
You can adjust it with the screw below the red sticker. You do not need to take out the spring.
CRM3605 OPV 스프링 유튜브 검색시 나오드라고요
안녕하세요! 개조 후에 턱턱턱턱 걸리는 소리와 함께 물이 제대로 나오지 않고 압력계 화살표가 요동치는데 어디서 잘못된 걸까요?ㅠㅠㅠ
스프링 길이에 따라 그런 경우가 있다고 합니다. 좀 더 스프링을 줄이거나 다시 늘이거나 하셔야 합니다. 전 좀 더 줄여서 문제없는 것을 확인하였습니다. 길이조절을 다시해보세요.
정발된 딜리코 crm3605+ 도 영상이랑 동일하게 개조 가능할까요???
네 동일한 구조입니다
압력이 안올라가요 바스켓? 끼고 내리면 압력바는 0에서 가만히 있고 뜨거운 물에 내린 커피만 나와요 스프링 장력도 조절해봄
구매할 때 제공하는 동그란 실리콘으로 바스켓을 막고 추출버튼 누르면 물이 새지 않고 압력이 올라가면 기계는 정상입니다. 커피를 넣었는데 압력이 안 올라가면 커피가 너무 굵은 것입니다.
@@mac-coffee굵게 안했는데도 그러네요.. 스프링 조절 하다가 스프링 조절 밑에 플라스틱 고정이 빠져서 다시 낀다고 뻘짓하다가 플라스틱이 부서져서 기계 버려야 할듯.. ㅋㅋㅋㅋ 감사합니다 이십만원 날림 쩝 양품이 아니었던듯
멘붕
@@Moong80 ㅠㅠ 슬픈 결말입니다. 어디가 깨졌다면 거기로 물이 흘러내릴텐데 조심하시길 바랍니다. 괜히 제 영상 때문에 망가진게 아닌가 걱정이 됩니다.
@@mac-coffee 여유되면 맥널티나 사야겠네요.. 쩝 아닙니다 애초에 양품이 아니었나봐요 스프링 건들기전부터 압력이 안올라가더라구요
따라해봤는데 4bar에서 안올라가는데 너무 세게 누른걸까요? 다시 늘리면 돌아올까요?? ㅠㅠㅋㅋ
네. 너무 눌러버린 것 같습니다. 블라인드 바스켓으로 테스트했는데 압력이 안올라가면 세게 누른 것입니다. 바스켓 막고 테스트 해보세요.
30초 부분에 보이는 붉은색 실리콘 제거 후 나사를 돌려서 조절이 가능하다는데 알고 계신가요~!?
네 실리콘 떼고 조이면 됩니다. 혹시 물이 새는 것을 막는 실리콘이기에 스프링을 줄였습니다. 편하 방법을 사용하는 것이 좋습니다