Це відео не доступне.
Перепрошуємо.
Installing the AC Unit on Top of the Cab on the John Deere 2510
Вставка
- Опубліковано 3 жов 2019
- YEA! The air conditioner is finally going on the cab, well it line up?
Twitch: / rdallen
Twitter: / randydozeman
Instagram: / therdallen
Check us out on Facebook: / rdallengaming
Get Your Own RDAllen Shirts: shop.spreadshi...
Monthly Snacks! www.universalyu...
Music: www.purple-plan...
/ nocopyrightsounds
Hey could you drop a link to that ac unit i would love one
Get a ignition coil clamp for the compressor pump to mount it
The collapsing magnetic field from the relays turning off, is inducing a reverse polarity voltage spike. Then finding its way to the turn lights. Or not lol I'm just some guy on the internet.
Where did you get your 120v power supply?
How does that ac unit work in the field? Keep up ok? Also what did you use for insulation on the cab?
Keeps up great! Just need to keep the RPMs up or the belt slips. I used acoustic panel
Great video as always Randy! Glad the A/C unit install went well. You could have used an Adel cushion clamp to mount the horn pump. I've installed fuel pumps of similar diameter using Adel cushion clamps onto an aircraft's firewall and they work great for mounting pumps. As for the turn signals blinking when you turn other circuits on, looks like you need to either ground those turn signal lights better or replace the turn signal wires with shielded wiring. Also, when you switch on other circuits, are you getting any interference with your radio as you switch them? If so, you may need to install a noise canceling filter for the radio.
That's a good point, I don't think I have any grounding location up on the dash, I'll have to do that, I do have ground wiring, but I've been grounding them at each location to the frame. That would be a big adel clamp for the horn pump! Luckily I have a brother who is good with a 3D printer.
Looks like a ground issue to me.
Could be, not sure how or why that would be.
Could of mounted a hose clamp to hold the horn pump.
Like this:
www.amazon.com/Omix-Ada-17115-01-Radiator-Hose-Clamp/dp/B000FQ973A/ref=sr_1_5?crid=23JMXN59L0AXV&keywords=radiator+clamp&qid=1570283434&sprefix=radiator+clamp%2Caps%2C166&sr=8-5
Could, would have to screw the clamp in first.
What did you use to run power to the ac unit?
12/2 MC cable
What is the brand and model of that AC unit ?
Coleman Mach 9
are you running a DC to AC inverter to power the AC ?
Yes
@@radozeman Which inverter did you use?