SolidWorks Tutorial # 306: Gripper

sw-tc.net/#306 solidworks tutorial gripper with the previous servo motor
►SolidWorks Learning course (voice):► • SolidWorks Complete Le...
►SolidWorks Sheet Metal Lectures► • SolidWorks Sheet Metal...
►Our Playlists:► / sw-tcnet
►Our Website:►www.SW-TC.net
►Our channel :► / sw-tcnet
►Facebook:► / solidworks.tutorial.net
►Tutorials Engineer Channel: ► / @tutorialsengineer
►Engine1 Project :► • Project 10: V6 Engine
►Engine 2 will be completed on:► • Engine 2 project
►For more SolidWorks Tutorials: ► • SolidWorks Practical T...
►CATIA Complete Learning:► • CATIA Complete Learni...
►Inventor Complete Learning:► • AutoDesk Inventor Comp...
►SolidWorks Surface Lectures: ► • SolidWorks Surface Tut...
►Solidworks Sketch Tutorials: ► • SolidWorks SKETCH Tuto...
►SolidWorks Beginner Tutorials: ► • SolidWorks Complete Le...
►SolidWorks Sheet Metal Lectures► • SolidWorks Sheet Metal...
►SolidWorks Weldment Lectures:► • Playlist
►Available Playlists:► / sw-tcnet
►Learn Engineering Playlists:► / @tutorialsengineer
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
All dimensions are in mm/g/s/ISO - Based on true dimensioning.
---------------------------------------------------------------------------------------------
Rating, commenting, subscribing and sharing are always appreciated!!
----------------------------------------------------------------------------------------------
The uploading of tutorials is based on an accumulated studied plan!
----------------------------------------------------------------------------------------------
New to SolidWorks?! Recommended to watch my earlier uploads.
----------------------------------------------------------------------------------------------
I will be thankful to you for replying whom are in need.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Hello & Welcome to SolidWorks Tutorial Channel
This channel is dealing with EVERYTHING about SolidWorks aims to make the viewer a professional SolidWorks user! & to be helpful !
This Channel beside Tutorials Engineer contain topics about:
- SolidWorks Beginners Tutorials
- SolidWorks Sketching
- SolidWorks Surface
- SolidWorks Weldments
- SolidWorks Assembly
- SolidWorks Drawing
- SolidWorks Sheet Metal
- SolidWorks Mold Design
- SolidWorks Simulation
- SolidWorks Motion
And MORE
►►►SUBSCRIBE ?!◄◄◄
-------------------------------------------------------------------------------------------
GO PROFIST ...BE SOLIDWORKIST ◄ suggested words!
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
----------------------------------------------------------------------------------------
★------ ۞ ART ۞ ENGINEERING ۞ CREATIVITY ۞ ------★
----------------------------------------------------------------------------------------
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Warm Thanks to them who supported and subscribed our channel in our very early start... All are nice but you are special!!
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Viewers can contribute translated titles, descriptions, and subtitles/CC (with different languages)
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
OTHERS:
TO BE FILLED
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
■ if you feel want to give something in back : the minimum : Rate, comment, subscribe & share!!

[@zaid_marridi]

I love how these dimensions are almost exactly the same as the ones I need for my project.
Thanks a ton for this, helped me out a lot

[@Prathyusha3]

Can you plz send your project as I need reference to do mine

[@mushrafns1265]

bhai please send share ur project i need ur help

[@mosta7050]

man
believe me you're great
and the thing that i love most in your work , i see that you control the tools like magic
and do whatever you want with the simplest way , it's always more simpler than my approach
keep going

[@GOPsterPlayTV]

I thought at first, that I will have to watch the tutorial in 4x split screen mode. Glad it have not happened.

[@user-jz4zu8ln5y]

기계원리가 대단하십니다
그런데 기계만드는 과정이 쉬울거 같은데 생각보다 어렵네요
영상 잘보고 갑니다

[@user-yx8zm2qq6c]

I love your work and how well explained your videos are, they are really helpful :)

[@jonathanveleta9003]

La pieza que tiene como Gear4 es una que ya hizo y está en el video de Servo motor #302

[@emersonyassersuarezflores3829]

Gracias amigo.

[@user-pv5yh4de6f]

기계 원리가 참 대단하십니다

[@user-ff8gg6vi9z]

Bro… can u send these all parts in STL file format

[@rikywahyudi2154]

great job bro, inspired

[@Homo_neanderthal]

Can I please get the Solidworks files and the assembly?

[@kada3374]

me too plz

[@Homo_neanderthal]

@@kada3374 he didn't give

[@JacobJz]

That is incredible! You helped me do my robotics homework. Thanks man. Just one question, how did you do the servo motor? I got to the video link but there is nothing on the page.

[@lukyjenco5658]

Where can I get this Gear4 which you inserted from another project? I am modelling it for myself.

[@vietho5654]

Following this video, I made this Gripper ( without servo) by Solid 2020, the link is below. Tell me if I made any mistakes, thank you

[@vietho5654]

drive.google.com/drive/folders/1NnMi0_mTujFCTwXJz52obHRgEJsO8pjk?usp=drive_link

[@vietho5654]

link: drive.google.com/drive/folders/1NnMi0_mTujFCTwXJz52obHRgEJsO8pjk?usp=sharing

[@MrSalih59]

part 8 changes after you add gear 4 its no longer 0.8 dia after that what is the new ones calculations you didnt tell in the vid

[@karama5478]

Hi, where are you getting those dimensions?

[@JapnitSethi]

People who are searching for the Gear 4 (It is part of Tutorial #302: Servo Motor)

[@gabrielamonserratgarciagon1717]

Japnit Sethi thank you!, you saved me

[@khoabuidang4915]

Many thanks bro !!

[@_SketchHead_]

Where's part 4? Was this made from another video or is this like a pre-made part available in Solidworks already????

[@juliolosilla2628]

Thanks you soo mach.

[@WEE2LY]

You saved me bro

[@banothsaivinaik5959]

Could you tell all parts with dimensions

[@user-fc7uo2zo7c]

Good job!

[@mushrafns1265]

sir please share the 2D and 3D with me i need it

[@rathinagre6501]

Hey I'm looking for gear4 dimensions if could you possible shear link of gear4 dimensions part that will really helpful.
As per mention in video I refer both servo motor and DC motor but I can't find out.
Will you plzz help me in this that will be great .

[@ayushimeena1536]

Hii, really appreciate your work. Can you provide the measurement sheet for all parts?

[@changliao6798]

May I have the file for this gripper?

[@feryfez]

Hi, how would you make this same gripper but without the servo motor, for example with a pawl or something similar to that?

[@mathisletohic6555]

where do you find gear 4 ?

[@dinoraul7716]

solidworks tutorial 302- first section has only gears (it's before even parts start).

[@DanielSolis-ds3dr]

Cómo hicieron para realizar los engranes,?

[@yisusortiz6111]

Vienen instalados en el solidworks, en el apartado de toolbox

[@BigBCV]

For the first gear, when you grabbed it from the side bar, what Is the diameter of it overall? From the midpoint of the teeth to the other side. I don't have that on mine

[@muhammadamaduddin2626]

Hello Sir how do you add that gear 4 in that Part-8 could you please help out in it.

[@bahtiyarpolat5262]

where is gear drawing ? can you add me gear drawing ?

[@user-dp4vb8su1v]

Part 4 essue

[@isabhiiii]

can you Provide the design for 4 jaw gripper arm ?? it would be a great help !!

[@adityadhoble7396]

I tried this one. The (Orange coloured) fingers are not aligning with each other. Aligning in the sence when I'm rotating the gears they are not coming at a position where they can touch each other. Can you please help me with that

[@faesalexcellent9704]

could you help me, please. to tell about component in every part.. thank you

[@juanalvares11]

can autocad make those projects like the gripper?

[@armandowalking5334]

Hi, he dibujado todos, solo que el diametro tiene el barreno de la parte 8 me parece que no es de 1mm

[@derricklundy775]

would this count as a four bar mechanism?

[@ElEscocesMX]

Gracias me ayudo mucho saque 8 en mi proyecto xd

[@david97g]

de casualidad aun lo tienes ? si es asi me lo mandas a este correo [e-mail] (me gustaria comparar mi trabajo)

[@TheBennyxon]

Lol

[@luccasmarchetti3553]

Pondrías enviarme también? Mi gmail es [e-mail]

[@reymonsamirsifuentesespino4302]

@@david97g pudiste conseguir la pieza 4 ? del servo motor?

[@reymonsamirsifuentesespino4302]

@@luccasmarchetti3553 pudiste conseguir la pieza 4 ?

[@Prathyusha3]

How much weight can this gripper lift

[@aresaresxtox2663]

sr but where you get those Design Library
???

[@pradnilkamble3083]

Hi Ares, you should update your toolbox by double clicking on it.. inside tool box he is using the ISO standard tools... there you can find those parts

[@juanalvares11]

where can i leran solid works the basics?

[@mehedihassan5515]

You have website page?

[@Sw-tcNet]

Under construction

[@bulentdemir953]

How can I assemble the parts except pins ? Is screw does work ?

[@bulentdemir953]

Screw and nut

[@shivamprajapati4952]

Ohh nice

[@zadok22]

I have the same ? as
"Lucky Jenco". Where did you get the gear for part 4? Do you have the specs for that?

[@zadok22]

Oh never mind, I see its part of the Design Library

[@TheBennyxon]

@@zadok22 hey

[@kingcarloladiza9023]

can i download the file of this project?

[@mushrafns1265]

sir please provide me 2d and 3d drwaings in solidworks format i have only 2 days to make it so please help me.......!

[@daniel952]

Someone has already finished the project, i need gear4, i can't not do it, i hope someone can help me.
Thanks :)

[@kingrestless9300]

me too need gear4 :/

[@Prathyusha3]

@Daniel Espadas, @King Restless can u send your report if you had done by now as I need reference to do my project

[@user-dp4vb8su1v]

Gear was not in mm size

[@williamhuang5329]

Hanzhen harmonic gear , robot gear, , over 30 years experience

[@pratikpanchal2994]

Can you just provide dimension file…??

[@fredmila]

Once the annoying music starts at the beginning, you know there will not be a verbal description

[@mohammaddoniaei5284]

good but incomplete

[@xs2278]

I have draw them all😍. Contact me if you need them

[@xs2278]

@@mariafernandaadamechavez2595 which gear?

[@xinyuanjiang8947]

36:29 gear 4，i need it too🥺

[@xs2278]

@@xinyuanjiang8947 send me your email

[@sakshamsaxena7871]

@@xs2278 can u send me too
[e-mail]

[@sakshamsaxena7871]

@@xs2278 can u send me too
[e-mail]

[@piyushrampariya4652]

Half of components modeling not done ...👎

[@emmanuelgrigore8655]

beaucoup trop de faute c'est chiant a suivre