The consideration, tenacity, politeness , thought and really hard work that you two put into your efforts, give everybody listening, and watching, a lot of hope. We all wish that "Rob and Chris" were here to take our cars to........because you (Both) are, without a shadow of a doubt, truthful and honest. We trust and we like you.
Hello Chris and Rob, great team effort on these vans. Special thank you to Chris for his continued ‘pieces to camera’ very much appreciated and enjoyed. Thank you for taking the time to upload another video. Ged
A great turn around on the Vito Van, nothing missed out, and nothing glossed over. Considering the gamble you took, the journeying about and all the brisk work you have done, you have earned a fair return for your confidence. It is a valid point, you stuck your necks that bit further than others with your winning bids, the seller had his money, you won the vehicles, and worked the profit. An excellent result for everyone in my book.
You guys are brilliant 👏 i envy you're friendships and being able to run your own place. Just to top it off your both really decent and honest blokes. To find honest decent dealers nowadays is difficult. Fan for like here. Would love to have a coffee with these 2 and watch chris at work, seriously intelligent man. All the best to you both and your familys. ✌👊.
That’s more like it Chris I really like the way you’re beginning to interact with the camera and telling us what you’re doing, just like rob to get you welding again, glad you are charging proper money guys , people shouldn’t forget that you are a business and you’ve got overheads , ie the garage , heating, electricity, etc, enjoyed the vlog guys
Rob, don’t ever apologise for making a profit. You are so transparent with the numbers and everyone can see the quality of the work you do. No matter what you make, someone is going to get a great van at a great price, especially in the current difficult market. You both have a living to make and you take the risks.
When your trying to put oil in an engine, just make a small hole on the handle to let the air in Rob. Or, spend a tenner and get 20 plastic funnels and leave them laying all over the workshop.
Short round head screw will reseal ready to use for used oil disposal. We used to mix used oil and proper creosote to protect wooden fences especially new posts at family home.
History repeats itself. My dear departed Dad spannered and drove for a member of the Birmingham speedway team. Every year they would purchase a big car, Zodiac or suchlike "up north" as the team transport, replace the rear bumper with a channel section to carry a bike and away they went . The season finale was always at Wembley where they would sell the season 'bus'. The price differential was usually enough to negate the overall cost for the year.
Hi Rob and Chris, now this is a tidy van, nice to see you fitted new front tyres. Chris was mustard sorting that front door out so quickly. Nice quick turnaround and enjoyed the video guy's. Cheers, Alex.
Taking a chance on all those vans is as you know part of your kind of work. Generally you manage to get off OK. That was a bit naughty with the roof but I have seen it before, it is usually just laziness, take the rack off and can't be bothered to plug the holes . The same goes for the door, just throw some washers in that will do. You two would never do such a thing I know but you are right Rob in saying how far do you go. Great video and numbers gents have a good weekend Chris and Rob. 👍👍
Rob and Chris, I’m really enjoying this format where you are both inputting your contributions to the repairs as you go. It’s like actually being there helping to do the repairs….- very very enjoyable. Best regards from “an old Thanet boy” 😊
Well done guys, had a few of those vans now and still running one, really dependable and well built and main dealer parts are surprisingly priced. Whoever buys it will be well pleased.
You've certainly struck lucky with these vans, they've al been pretty serviceable and decent looking. A bit of Chris & Rob magic and they are back on the road earning someone a crust.
I think the technical term you are describing is "GLUG GLUG GLUG" but I just call it and air-lock. Special thanks to Chris for taking the time to show us what he was doing with the door. Cheers, Jim in NZ.
Chris done brill lining up door I’m driving vitos years lovely to get in and out of all day Mercedes strong engine 💪🏻💪🏻 That’s nice profit rob Even though collecting it was a pain 😂 Great video both of you Keep it up 👍 👍
Nice one on this one - Nice to hear Chris join in with the explanation on the door fix - Keep it up lads - I really enjoy watching your channel. Cheers
Hello Rob and Chris, another excellent video showing how you both work as a team to get projects done. Thank you for taking the time to upload another video. Ged
I think after all this time we are all aware how much Chris doesn’t like the camera, BUT he’s more involved now and he’s really good at it, just like anything bloody else he does 😇😇 so please carry on Chris, another good video with a nice wage at the end of it very well deserved to,
I would say that being on TV is the last thing they want. As things stand,they have total control over the content, whereas being on TV means that you work through a production company, so you have to do as the director or producer wants. Look at the way Wheeler Dealers went down the pan when it got sold to the Americans. Don't change a thing.
Thanks for another great video, I bet Chris finds straightening doors back either goes easy or they are a pain. over the years I've probably done 50 steel framed tractor/machine cab doors guys have smacked into gateposts and other things and that's what I find. Yeah that dogs smart with that ball. We use to fatten 5000 pigs a year here. Those animals ripped the boards off in the barns and figured out pushing a 6ft long planed 2x6 piece out of a mesh gate in the end of the barns with 6" x 4" holes in it. Quite often we'd find stuff they found or ripped off outside in the mornings where they chucked it out after playing with it for a while. They'd even throw all the bits of a Stanley knife out over a few days if one got dropped in there while cutting strings on bales and they found it. Take care guys.
Hi Rob. You on the train is great leaving Chris behind doing his magic 🪄 Nice little profit for your efforts on the Vito 😂 Have a great weekend cheers Stevie 😎
I remember someone on Dragons Den developed an attachment to screw to an oil container to stop the oil from glugging. He was crestfallen when Peter Jones said "just turn the can on its side and it pours perfectly". Exited empty handed.
What's that dogs name Ronaldinho 🤣 , nice bit of Chris explaining what he's doing etc . Not bad set of Van's so far & a decent profit well deserved guys 👏. Stay safe and look forward to seeing the next one.
Good to see you making a good return on your work, but 'railway station' please!! Someone is going to get a nice van, hope it serves them well. Great content, thanks again guys.
Hi Rob Chris ,,yet another great vid ,,it is nice for a change as you haven't had to work hard to make a crust ,,,turned out a nice little van ,,Chris doing his magic yet again on the door ,,enjoy your profit,,you never kick the arse,,,out of any money you ask ,,keep em coming, stay safe all 👍
Love the van Rob you can't beat a Vito, and will run forever too, making me miss the 2 I had. What a bargain that van was and will be when you put it up for sale.
It's like a good wheeler dealers where they actually make some money and the guy doing the buying and selling isn't a absolute bell lol. Considering the content is of mostly run of the mill vehicles it's some how really compelling, I think that's just testament to these two nice chaps does things how they should be done. "You watching that guy again??" "What they fixing this time?" Is often heard from the Mrs. 😀
Great little work van, good to see Chris use his knowledge about how to manipulate panels to factory spec with a piece of iron and brute force lol. It’s a shame about the company that went into liquidation but good that you and Chris putting the vehicles back on the road Rob. Pity they haven’t got any company cars to get rid of the content would have been great and you could have got a 6 month rail pass Rob lol. Thanks for another great entertaining video looking forward to the next one. Tom
Another great video guys and a really quick flip, even with the travelling. Don't forget to change the gear knob. You must have mentioned it four times. All the best and great stuff.
Fair play for the asking price Rob - Given how much time you spend on these vehicles and the attention to detail you don't need to apologise for how much you put the vehicles up for - Well done !!
Nice to see you directing yourself now Chris 🤔 finding your own camera angles 😉, is there anything you can’t turn your hands too 😁. Blimey Rob could watch that dog and ball game all day 😁, do you have any half inch washers spare 🤪👍🏻. Nice video guys and have a great weekend.
Would have been good content to see the wheels get sorted, the seats deep cleaned and the ply lining replaced and upped the asking price. Great video as always 👍🏻
Great video guys short and sweet but just shows if you know your stuff you can do well. Loving seeing and hearing Chris more. He knows his stuff and always interesting. Have a good weekend guys 👍
Nice to see you working hard Rob.. Playing ball with dog.. And well done Chris on the excellent camera work while working hard 🎥👌😊 Nah good team work guys💯😊
I'm such a dimwit I didn't realise the importance of hitting like, not that I didn't like all your previous videos! So, eventually I'll go back and check I've liked all of them! Loved the dog interlude. Dog lovers will like this story i heard at the weekend about a greyhound who was too clever for racing. He could see that if he hopped over the fence a couple of times, he could get to the hare first 😂
Like watching your video spent a lot of time on sheppy in my youth but now live in Essex just seeing the old bridge and of course your repairs great fun to watch
It's so heartwarming to see the respect and politeness between Rob and Chris. It really is!
Chris is so laid back. If he doesn't become the new James Bond then there's gonna be riots. Great video 👏👏👏
THE best comment! 👍🏻
licensed to chill
Never shaken, just mildly stirred....
The consideration, tenacity, politeness , thought and really hard work that you two put into your efforts, give everybody listening, and watching, a lot of hope.
We all wish that "Rob and Chris" were here to take our cars to........because you (Both) are, without a shadow of a doubt, truthful and honest.
We trust and we like you.
Chris done a great job and even a bit of chat which was great. Do a bit more mate. Kind regards everyone, Darren in Great Yarmouth
Darren, don't forget you still owe me a fish and chips!
Hello Chris and Rob, great team effort on these vans. Special thank you to Chris for his continued ‘pieces to camera’ very much appreciated and enjoyed.
Thank you for taking the time to upload another video. Ged
Quality of these videos has really taken a step up recently. More Chris in the videos is great! Keep 'em coming guys 👍
A great turn around on the Vito Van, nothing missed out, and nothing glossed over. Considering the gamble you took, the journeying about and all the brisk work you have done, you have earned a fair return for your confidence. It is a valid point, you stuck your necks that bit further than others with your winning bids, the seller had his money, you won the vehicles, and worked the profit. An excellent result for everyone in my book.
You guys are brilliant 👏 i envy you're friendships and being able to run your own place. Just to top it off your both really decent and honest blokes. To find honest decent dealers nowadays is difficult. Fan for like here. Would love to have a coffee with these 2 and watch chris at work, seriously intelligent man. All the best to you both and your familys. ✌👊.
Another great video lads. Really enjoying Chris getting more involved in the making of the videos and explaining his techniques as he works his magic.
That’s more like it Chris I really like the way you’re beginning to interact with the camera and telling us what you’re doing, just like rob to get you welding again, glad you are charging proper money guys , people shouldn’t forget that you are a business and you’ve got overheads , ie the garage , heating, electricity, etc, enjoyed the vlog guys
Rob, don’t ever apologise for making a profit. You are so transparent with the numbers and everyone can see the quality of the work you do. No matter what you make, someone is going to get a great van at a great price, especially in the current difficult market. You both have a living to make and you take the risks.
Nice to see chris doing more on the videos
Props to Chris for making an effort with filming.
You two are a bit special. Modest, unassuming but bloody brilliant. This is such good content, we're lucky to have you on here.
Well done Chris, doing your peice to camera fixing that door.
What another awsome buy guys !! Quick turn around, well done for taking the gamble !!
When your trying to put oil in an engine, just make a small hole on the handle to let the air in Rob. Or, spend a tenner and get 20 plastic funnels and leave them laying all over the workshop.
Once on a Channel 4 program, Bernie Fineman was tell8ng everyone his "tip" of rolling a magazine up. Far easier to cut down a drink bottle
🤦🏻♂️🤣
They dont do mess , tidy guys
Short round head screw will reseal ready to use for used oil disposal. We used to mix used oil and proper creosote to protect wooden fences especially new posts at family home.
Why not just hold the container sideways then it will not ‘glug! As u pour into engine simple!
Rob on another adventure, Chris is a bloody genius and oil glugs when the can is not tipped sideways 😁. Superb as always.
History repeats itself.
My dear departed Dad spannered and drove for a member of the Birmingham speedway team. Every year they would purchase a big car, Zodiac or suchlike "up north" as the team transport, replace the rear bumper with a channel section to carry a bike and away they went . The season finale was always at Wembley where they would sell the season 'bus'. The price differential was usually enough to negate the overall cost for the year.
Love it when Chris pulls out the little tricks for the door great video.
Chris taking over camera duties, well done!
Well done to chris for getting the lines so good on the drivers door
Hi Rob and Chris, now this is a tidy van, nice to see you fitted new front tyres. Chris was mustard sorting that front door out so quickly. Nice quick turnaround and enjoyed the video guy's. Cheers, Alex.
Taking a chance on all those vans is as you know part of your kind of work. Generally you manage to get off OK. That was a bit naughty with the roof but I have seen it before, it is usually just laziness, take the rack off and can't be bothered to plug the holes . The same goes for the door, just throw some washers in that will do. You two would never do such a thing I know but you are right Rob in saying how far do you go. Great video and numbers gents have a good weekend Chris and Rob. 👍👍
Rob and Chris, I’m really enjoying this format where you are both inputting your contributions to the repairs as you go. It’s like actually being there helping to do the repairs….- very very enjoyable. Best regards from “an old Thanet boy” 😊
When i first saw the van, i said to myself, no way too much exterior to do, but you did it again bravo. Have a great weekend
Well done guys, had a few of those vans now and still running one, really dependable and well built and main dealer parts are surprisingly priced. Whoever buys it will be well pleased.
You've certainly struck lucky with these vans, they've al been pretty serviceable and decent looking. A bit of Chris & Rob magic and they are back on the road earning someone a crust.
Nice bit of "gentle persuasion" from Chris to realign the door. Quick flip and a good profit as well Can't be bad.
I think the technical term you are describing is "GLUG GLUG GLUG" but I just call it and air-lock. Special thanks to Chris for taking the time to show us what he was doing with the door. Cheers, Jim in NZ.
Love the Chris segments. They really balance out the videos.. keep up the great work guys!!
Two of the nicest honest guys in the industry
Chris done brill lining up door
I’m driving vitos years lovely to get in and out of all day
Mercedes strong engine 💪🏻💪🏻
That’s nice profit rob
Even though collecting it was a pain 😂
Great video both of you
Keep it up 👍 👍
Nice one on this one - Nice to hear Chris join in with the explanation on the door fix - Keep it up lads - I really enjoy watching your channel. Cheers
Hello Rob and Chris, another excellent video showing how you both work as a team to get projects done. Thank you for taking the time to upload another video. Ged
Quality fix yet again guys. Great to have Chris’ commentary too! Brilliant channel. 👍
I think after all this time we are all aware how much Chris doesn’t like the camera, BUT he’s more involved now and he’s really good at it, just like anything bloody else he does 😇😇 so please carry on Chris, another good video with a nice wage at the end of it very well deserved to,
Great video as always guys. Love that Chris is getting more talkative, just needs a t-shirt now that says "I'm learning to waffle" 😁
Thanks Chris for the narration, keep it coming pretty please 😉
Cracking video.. Love that Chris is doing his bit to camera... Keep saying it this is what wheeler dealers should be like... You guys need to be on TV
I would say that being on TV is the last thing they want. As things stand,they have total control over the content, whereas being on TV means that you work through a production company, so you have to do as the director or producer wants. Look at the way Wheeler Dealers went down the pan when it got sold to the Americans. Don't change a thing.
Nice job guys
Chris is really coming out of his shell with his narration and dry humour 👍🏻✌️🙌🙌
Thanks for another great video, I bet Chris finds straightening doors back either goes easy or they are a pain. over the years I've probably done 50 steel framed tractor/machine cab doors guys have smacked into gateposts and other things and that's what I find. Yeah that dogs smart with that ball. We use to fatten 5000 pigs a year here. Those animals ripped the boards off in the barns and figured out pushing a 6ft long planed 2x6 piece out of a mesh gate in the end of the barns with 6" x 4" holes in it. Quite often we'd find stuff they found or ripped off outside in the mornings where they chucked it out after playing with it for a while. They'd even throw all the bits of a Stanley knife out over a few days if one got dropped in there while cutting strings on bales and they found it. Take care guys.
Love how Chris is getting involved 👍🏻 great video guys, keep them coming!
Great to see Chris straightening those hinges. A brilliant return for not too much work, but appreciate the trouble you go to to pick them up.
Hi Robin Chris I know I keep on saying the same thing week in week out but but what a great video again take care both 👍🏻😊
Thank you we appreciate the comments 👍
Rear tailgate and twin side doors is a great configuration. Tailgate keeps the rain off you.
Hi Rob. You on the train is great leaving Chris behind doing his magic 🪄 Nice little profit for your efforts on the Vito 😂 Have a great weekend cheers Stevie 😎
I remember someone on Dragons Den developed an attachment to screw to an oil container to stop the oil from glugging. He was crestfallen when Peter Jones said "just turn the can on its side and it pours perfectly". Exited empty handed.
What's that dogs name Ronaldinho 🤣 , nice bit of Chris explaining what he's doing etc .
Not bad set of Van's so far & a decent profit well deserved guys 👏.
Stay safe and look forward to seeing the next one.
Hi Rob and Chris,another great van.just cleaning it has made a difference.Do the holes in the roof and it will be a nice van to sell on.
Just a shout out to Chris, we love his new little side recordings he's started to do. The boys a legend ! Thanks Guys.
Hi Rob & Chris you both have done well with the van you both done you magic all the best to you & your family
Nice wee turn.. Amazing it probably took less time to fix that door properly than the bodge did. Just shows you that it's only easy when you know how
Nice job Chris and rob on the merc van.
Chris done a great job as always. Carry on doing what you do mate
Great van guys and again another really good practical lesson from Chris. Thanks both, looking forward to the next one!
Good to see you making a good return on your work, but 'railway station' please!! Someone is going to get a nice van, hope it serves them well. Great content, thanks again guys.
Hi Rob Chris ,,yet another great vid ,,it is nice for a change as you haven't had to work hard to make a crust ,,,turned out a nice little van ,,Chris doing his magic yet again on the door ,,enjoy your profit,,you never kick the arse,,,out of any money you ask ,,keep em coming, stay safe all 👍
These Vito vans are amazing and well built vans. I had one for years and my collegue had his for 5 years and drove 50k miles a year.
Love the van Rob you can't beat a Vito, and will run forever too, making me miss the 2 I had. What a bargain that van was and will be when you put it up for sale.
It's like a good wheeler dealers where they actually make some money and the guy doing the buying and selling isn't a absolute bell lol.
Considering the content is of mostly run of the mill vehicles it's some how really compelling, I think that's just testament to these two nice chaps does things how they should be done.
"You watching that guy again??" "What they fixing this time?" Is often heard from the Mrs. 😀
THese Wolverhampton ones have been so interesting --after they have run out could you find some in Edinburgh to keep us all going !!
Did you change that blasted gear knob? It was mentioned several times. Chris the "van whisper " now....another good video guys enjoy your weekend....
Great narrative from Chris, nice van values are high at the moment so glad you can make a good profit.
Another great turn around for you guys well done
Keep up the travelling Rob and you’ll be the Alan whicker of the salvage world in no time. great video again as always guys 👏👏👏
Am I alone in wanting to see the new gear knob in place ? 😂😂😂 great video as always 👍👍👍
Great little work van, good to see Chris use his knowledge about how to manipulate panels to factory spec with a piece of iron and brute force lol. It’s a shame about the company that went into liquidation but good that you and Chris putting the vehicles back on the road Rob. Pity they haven’t got any company cars to get rid of the content would have been great and you could have got a 6 month rail pass Rob lol. Thanks for another great entertaining video looking forward to the next one. Tom
Another cracking van well done Chris & Rob these vans are proving to be great content & quick flips looking forward to the next one
Favourite UA-cam channel. Chris is so gifted
Great vid Rob and Chris a Friday treat for me
Great video, this is the second time in a week I want to buy one of the vehicles you’ve done even though I have absolutely no need for it. Well done.
Another great video guys and a really quick flip, even with the travelling. Don't forget to change the gear knob. You must have mentioned it four times. All the best and great stuff.
Fair play for the asking price Rob - Given how much time you spend on these vehicles and the attention to detail you don't need to apologise for how much you put the vehicles up for - Well done !!
Great job guys, thanks for your continued efforts in pulling together these videos
Twin side loader doors are really rare on Vito..there usually minibus version.
Good van and a good price!
This is an interesting comment, for I have not seen any Vito's here in Australia without twin side doors. Must be a UK thing.
Another lovely flip, my dad taught me about the door adjustment back in the day, I have used it several times.
Great to see another video. 👍
Great to see Chris having more input on camera. Great video as always guys 👍🧰🔧
Tilting the can on it's side lets the air in so helps the oil come out. Old school that Rob.
I know bud old school is best 👍
Keep rolling the dice boys. Great content 👍
Love the way the Chris works.spot on as usually Chris😀👍
Nice to see you directing yourself now Chris 🤔 finding your own camera angles 😉, is there anything you can’t turn your hands too 😁. Blimey Rob could watch that dog and ball game all day 😁, do you have any half inch washers spare 🤪👍🏻. Nice video guys and have a great weekend.
Love it that you’ve got a sweet profit out of it! Great work guys!!!
Would have been good content to
see the wheels get sorted, the seats deep cleaned and the ply lining replaced and upped the asking price. Great video as always 👍🏻
Nice to see chris on camara more he is 1 smart fella great videos never miss 1 have a good week end boys .
Great video guys short and sweet but just shows if you know your stuff you can do well. Loving seeing and hearing Chris more. He knows his stuff and always interesting. Have a good weekend guys 👍
Chris works his magic on the door, Robs got the knob and the glug! Dream team!
Great work lads 👍
Nice easy one. Nice bit of persuasion from Chris.
Nice to see you working hard Rob..
Playing ball with dog..
And well done Chris on the excellent camera work while working hard 🎥👌😊
Nah good team work guys💯😊
Another Quick turn around, easy money 👍👍
Great job to both of you and Chris for sorting the with a clever fix
I'd be more than happy to buy a used motor from you guys. Honesty and fair pricing all the way.
What a nice quick turnaround video. Makes great content as always !!! Looking forward to seeing what takes its place.
Winner. Great little Van's. Nice good fair flip boys.
I'm such a dimwit I didn't realise the importance of hitting like, not that I didn't like all your previous videos! So, eventually I'll go back and check I've liked all of them! Loved the dog interlude. Dog lovers will like this story i heard at the weekend about a greyhound who was too clever for racing. He could see that if he hopped over the fence a couple of times, he could get to the hare first 😂
Like watching your video spent a lot of time on sheppy in my youth but now live in Essex just seeing the old bridge and of course your repairs great fun to watch
Nice one boys keep your brilliant work coming
Great result 👏 Guy's.
Love seeing Chris's skills again.
Keep the video's coming.
Nice to see you make a wee bit more than a half decent profit this time, you both deserve it.
Well done lads. 👌👍😀