Very good!. Thanks for taking the time to make and post this video. I enjoyed meeting you at worlds and seeing your bot in action. I was disappointed that you did not make the round robin. Your round of 16 may have been the highest total score of the tournament and decided by only 2 points. You all had an excellent year. You are exhibit 1 for why we should have best of 3.
Really helped in understanding it and thank you for showing the front of the robot. Instead of just one chain there are two for each gear and are wrapped around as well as screwed in with two pillow bearings at each side. Allowing it to translate upwards
Hi, I'm from an FRC team and don't know anything about cascade elevators, which we are using this year. While researching, I came across this video and I love the detail. Thank you!
Hey guys, My team and I saw your guys lift it is actually great. Its was so cool that for the next game we decided to begin building one. so far we have a simple concept. But we plan on making it more complex over time obviously. So its sad that you guys are leaving but I am just saying you've inspired so many people my guy its appreciated.
Even from my limited experience with v5, I highly recommend v5 motors for any build including this lift. You should only need one or two v5 motors. Thank you for the kind words and be sure to share a video of your cascade, I would love to see how it turns out.
I'm actually working on making a size reduction on this lift, to make it fit on one side of the robot, with a catapult on the other side. Once finished, I think I'll have a full power robot, and I plan on taking videos and showing as i go.
Hi! Was researching for rover ruckus ideas to latch on the lander and to also get off of it. This is the only "linear slide" that is mecanically capable of pulling the robot up, but also getting it down in autonomous, right?
Hey! I'm new to VEX EDR and Turning Point will be my first season☺️. We were thinking about building a cascade lift from the very start but we have no idea how to build it😶😅. If possible, do you have any CAD models of the lift? It would be extremely helpful for us and we would really appreciate it. Thank you!☺️👍
Dillan Shah we didn’t cad model our exact lift, but there are many 3D modeled examples online that demonstrate how cascades work. This video on vex forums also has pictures of the lift.
would it help if we put rubber bands at the top of stage one connected to the bottom of stage 2 instead of the latex? We are definitely using this for turning point by the way
The Rad Pandaman, rubber bands like that would help, but the reason we had the pulley was to keep the force more constant through the lifting motion. When the lift is down bands are likely at least 3x stretched meaning thrice as strong. It will be too strong at the bottom and too weak at top. Pulleys change that to about 1.5x the strength at bottom. Hope that helps, good luck with turning point!
What's the diameter on those spacers that you laser cut? I don't have a way of laser cutting so im trying to find somewhere that sells them in that size. Love the design of this lift.
Hey, im building a robot for one of my classes and we were inspired by your video. We have started to build a basic cascade lift although we have come across as problem, the way our sliding mech works is not very efficient and sometimes gets stuck. we basically need a new way of getting the stages to slide and im wondering if your able to help us. Thanks!
The thinnest spacer on mcmasters that fits the VEX 8-32 screws are 1/4" thick, which is actually a little thicker than their special spacers but should still work.
Hey, guys. Thanks for making a great video for the cascade lift. I just had one question regarding the laser cut spacers required for building the cascade lift. In the video, you guys said that you can buy the spacers. I would just like to know where we can buy the spacers as my team is trying to build the cascade lift for the new game; Vex Turning Point. Also, i just saw a comment that you can buy the spacers on McMaster. I would like to know the part number of the spacers that we can buy from McMaster. Thanks.
Do you think if you cut it in half vertically it would still be viable with 2 motors (1 top 1 bottom?) or is having 2 motors on each side and and top and bottom essential.
I'm not exactly sure what you mean by "cut in half vertically" but v5 motors have 2.5x the torque at the same rpm, so 1-2 motors will be all you will need.
Hi this is team 2602G, we were thinking of using a cascade lift in this years game, however, when prototyping your design, we struggled with making the second stage chains turn in order to lift third stage. I noticed you had some sort of connection between the second and first stage as well as second and third that allowed third to go up, however we can’t see what it is. Can someone please explain 😭😭😭😭
My team built this for tower takeover, it’s really good and it’s the fastest robot at towers and we have a claw that can currently hold 3 and soon 6 cubes. Check us out on vex via (8756M) 3rd competition was when it was done.
Post a comment if you have a question about the lift.
How do you attach the 3 different sections? And what are the exact pieces so I can order them?
What size did you laser cut for the spacers?
How did you keep the metal for the lift (the 3x30s I think) close to each other?
You know it was a good design when I'm sitting here 6 years later about to use this in a vex hame
Very good!. Thanks for taking the time to make and post this video. I enjoyed meeting you at worlds and seeing your bot in action. I was disappointed that you did not make the round robin. Your round of 16 may have been the highest total score of the tournament and decided by only 2 points. You all had an excellent year. You are exhibit 1 for why we should have best of 3.
Really helped in understanding it and thank you for showing the front of the robot. Instead of just one chain there are two for each gear and are wrapped around as well as screwed in with two pillow bearings at each side. Allowing it to translate upwards
Hi, I'm from an FRC team and don't know anything about cascade elevators, which we are using this year. While researching, I came across this video and I love the detail. Thank you!
Im in the same boat as u xD
great work! love seeing other robots build quality wish you best of luck in life!
So much respect. Such a high quality build
Hey guys, My team and I saw your guys lift it is actually great. Its was so cool that for the next game we decided to begin building one. so far we have a simple concept. But we plan on making it more complex over time obviously. So its sad that you guys are leaving but I am just saying you've inspired so many people my guy its appreciated.
also we were wondering what would you choose v5 on this lift or just the regular ones.
Even from my limited experience with v5, I highly recommend v5 motors for any build including this lift. You should only need one or two v5 motors. Thank you for the kind words and be sure to share a video of your cascade, I would love to see how it turns out.
I'm actually working on making a size reduction on this lift, to make it fit on one side of the robot, with a catapult on the other side. Once finished, I think I'll have a full power robot, and I plan on taking videos and showing as i go.
How did you connect the second stage to the first stage to make the chain in the second stage spin to raise the third stage?
Doing some research for frc 2025. This was CRAZY helpfull 👍
Hi! Was researching for rover ruckus ideas to latch on the lander and to also get off of it. This is the only "linear slide" that is mecanically capable of pulling the robot up, but also getting it down in autonomous, right?
Hey! I'm new to VEX EDR and Turning Point will be my first season☺️. We were thinking about building a cascade lift from the very start but we have no idea how to build it😶😅. If possible, do you have any CAD models of the lift? It would be extremely helpful for us and we would really appreciate it. Thank you!☺️👍
Dillan Shah we didn’t cad model our exact lift, but there are many 3D modeled examples online that demonstrate how cascades work. This video on vex forums also has pictures of the lift.
@@Jaxenormus ours has 4
would it help if we put rubber bands at the top of stage one connected to the bottom of stage 2 instead of the latex? We are definitely using this for turning point by the way
The Rad Pandaman, rubber bands like that would help, but the reason we had the pulley was to keep the force more constant through the lifting motion. When the lift is down bands are likely at least 3x stretched meaning thrice as strong. It will be too strong at the bottom and too weak at top. Pulleys change that to about 1.5x the strength at bottom. Hope that helps, good luck with turning point!
What's the diameter on those spacers that you laser cut? I don't have a way of laser cutting so im trying to find somewhere that sells them in that size. Love the design of this lift.
Hi- where on the vex forum can we find photographs of this lift?
Hey, im building a robot for one of my classes and we were inspired by your video. We have started to build a basic cascade lift although we have come across as problem, the way our sliding mech works is not very efficient and sometimes gets stuck. we basically need a new way of getting the stages to slide and im wondering if your able to help us. Thanks!
hello!! which material were the sprockets made?? nice project!!
Do you only latex tube the first 2 stages? Cause I don't see the tubing on the higher stages
this is probably very useful for the new vex iq rise above challenge
is there a build guide anywhere for at least the way the chain is being used?
How much chain did you use?
I am honestly terrified of this thing
Is there a way you could maybe put the link on here for the spacers on the McMaster website.
The thinnest spacer on mcmasters that fits the VEX 8-32 screws are 1/4" thick, which is actually a little thicker than their special spacers but should still work.
Hi could you guys do a build tutorial for this, I wanted to use this lift for turning point, but can't figure out how.
Sadly the lift has been disassembled for a while now. Sorry.
do you guys have pictures of the stages, spacing, and the lift in the highest and lowest position
www.vexforum.com/index.php/33492-99371a-cascade-lift-explanation
Can you point to the rule that says it is legal to buy the thinner spacers? I'm having trouble finding it.
Volpidash2770 it’s the rule that says any commercially averaged screws washers or nuts
Hey, guys. Thanks for making a great video for the cascade lift. I just had one question regarding the laser cut spacers required for building the cascade lift. In the video, you guys said that you can buy the spacers. I would just like to know where we can buy the spacers as my team is trying to build the cascade lift for the new game; Vex Turning Point. Also, i just saw a comment that you can buy the spacers on McMaster. I would like to know the part number of the spacers that we can buy from McMaster. Thanks.
How did you attach the spacers/baring blocks onto the chain?
Would this work for elevation for high stakes?
Do you think if you cut it in half vertically it would still be viable with 2 motors (1 top 1 bottom?) or is having 2 motors on each side and and top and bottom essential.
ill be using v5 motors if that makes a difference
I'm not exactly sure what you mean by "cut in half vertically" but v5 motors have 2.5x the torque at the same rpm, so 1-2 motors will be all you will need.
should i but two on the two or one on top one on bottom?
Did you guys use torque or high speed motors?
Ziyan Sultan torque
Dumb question, but how'd you manage to connect the bearings to the chains with normal screws?
you can run a screw and nut through the chain links to secure the bearings
That’s a really good idea, and I might use it
I thought grease wasn't allowed
U GUYS R MY FAVORITE TEAM (besides ours, 7830A)
Have you guys tried making with 2 motors?
Ro Ro we could run it with three motors but it was slower
@@daniellingen3062 kool
Hi this is team 2602G, we were thinking of using a cascade lift in this years game, however, when prototyping your design, we struggled with making the second stage chains turn in order to lift third stage. I noticed you had some sort of connection between the second and first stage as well as second and third that allowed third to go up, however we can’t see what it is. Can someone please explain 😭😭😭😭
Thx but we’re alright. Right after we wrote that we figured it out.
will you guys be competing in Vex U?
Maybe... the four of us are going to three different colleges so even if we compete, we wouldn’t be on a team together unfortunately.
:(
Hi im doing a very similar design for this years game, i was wondering where can i legally buy those very thin spacers?
Mc Master Carr sells them... I bought some this season... make sure you get the plastic ones! We tried both aluminum and plastic.....
Hey, I am planning on making a lift like this for Turning Point. How did you make your lift go so fast?
That's what I tried to explain in the video. Anything more specific?
Isn't grease illegal?
Bruh our lift won’t go up
And how many cones is that?
ua-cam.com/video/AxI8CMtCjCA/v-deo.html
nice
lmao when i first saw the color scheme i thought it was a ungenant video
My team built this for tower takeover, it’s really good and it’s the fastest robot at towers and we have a claw that can currently hold 3 and soon 6 cubes. Check us out on vex via (8756M) 3rd competition was when it was done.