DIY Crawler Hauler & Bugout Camper BUILD

Поділитися
Вставка
  • Опубліковано 1 січ 2025

КОМЕНТАРІ •

  • @quadguy1470
    @quadguy1470 4 роки тому +84

    I'm so glad to see the entire community offering up suggestions instead of talking smack, at the end of the day the options are endless and only you can decide what is best for you and your budget. No matter what you decide be proud of your work, I think you've don a great job so far!

  • @dkr6617
    @dkr6617 2 роки тому +40

    Wow, out of all the UA-cam videos out on the net related to bug out, van life, hauling your toys this one takes the cake! My friend I absolutely love this build and you have every right to be proud of this beautiful work of art and so practical, so personal thank you for shearing! I will gladly give a thumbs up and subscribe because you sir took the time to share this ultimate utility trailer with us, Happy Trails

    • @CodeBrownProductions
      @CodeBrownProductions  2 роки тому +5

      Thank you very much for the kind words. I really appreciate it! It was a fun and frustrating build. If I build another one I'll definitely have a lot more knowledge to work with.

    • @joeyhooper6672
      @joeyhooper6672 7 місяців тому

      ​@@CodeBrownProductions what size steel did you use

  • @Ejk2969
    @Ejk2969 4 роки тому +102

    An angled wind cover for your propane tanks would help secure them and add some storage space.

    • @Dimage666
      @Dimage666 4 роки тому +6

      I was thinking the same. A box that cover the generator and tanks would look good.

    • @chaddesantis4191
      @chaddesantis4191 4 роки тому +4

      Wouldn't hurt a bit if it were lockable and bullet resistant, either.

    • @ishechad5960
      @ishechad5960 3 роки тому

      Was thinking in terms of security from thieves as well😂

  • @luis__jrtx
    @luis__jrtx 4 місяці тому +1

    I used this build as the inspiration for a mini version for taking on bike/ski trips and I couldn't be happier with it. Thanks for posting!

  • @wheatdevon
    @wheatdevon 4 роки тому +122

    I use to be the draftsman for H&H trailers, my father was the engineer for featherlite trailers. I suggest one thing. your roof needs to have alum to make a water proof barrier with drip eves. and glue and seal no screws.

    • @ryanjoseph5576
      @ryanjoseph5576 4 роки тому +2

      You could have given him the advice without being an absolute asshole

    • @RichPianasOilPump
      @RichPianasOilPump 4 роки тому +38

      @@ryanjoseph5576 THAT’S being an absolute asshole? Damn you people are sensitive now a days

    • @tenncutt
      @tenncutt 4 роки тому +15

      @@ryanjoseph5576 what was assholey about that? Just seemed like friendly, helpful advice to me.

    • @rcash3625
      @rcash3625 4 роки тому +6

      @@ryanjoseph5576 wtf? being an asshole how?

    • @wild-radio7373
      @wild-radio7373 4 роки тому +3

      Yeah... Raaar!
      Lol. Cool camper.

  • @johnwarner9869
    @johnwarner9869 4 роки тому +13

    Space the bed about six inches or the height of the mattress and put piano hinges on the frame so you can Murphy the bed for more room and storage. Your project looks awesome and it has me motivated to start one myself.

  • @glenalexander1555
    @glenalexander1555 4 роки тому +59

    Looks good, as long as it suits your needs that’s all that matters.

    • @tommymadux3646
      @tommymadux3646 4 роки тому +1

      Thinking the same thing. If it works for your needs then it’s perfect for you and who cares what people think. Plus save the money on buying something and make it your self. The. Spend the money on vacation and using the toys

  • @chelseajoyce5135
    @chelseajoyce5135 3 роки тому +1

    WHAT a professional build, God blessed your hands young man, I would just like to mention to anyone new to welding, to disconnect the towing vehicle from the trailer when welding, in order to protect your alternator, from a power surge while welding, just in case anyone did not know, it can be hard pushing a vehicle and a trailer at the one time guys, take it from me and I am a woman,

    • @CodeBrownProductions
      @CodeBrownProductions  3 роки тому +1

      Thank you so much for the kind word and bits of advice. I really appreciate it!

  • @jamesborella4115
    @jamesborella4115 4 роки тому +23

    This is awesome! I've never seen anything like this and it makes so much sense. I have seen things kind of similar but the cargo area is enclosed which would take away your outside deck capability. This is very well thought out.

  • @timwegman5776
    @timwegman5776 3 роки тому +1

    Regulators mount up!!!! Gotta be handy with the steel if you know what I mean to earn your keep. It was a clear black night, a clear white moon Warren G was on the streets, trying to consume some skirts for the eve, so I can get some funk just rollin' in my ride, chillin' all alone
    Sorry all the talk about the regulators I just couldn’t resist the urge lol. Dig this trailer though I mean totally dig it. I don’t do much rock crawling but I would love to especially if I owned this. When I was younger and raising my boys we did a lot of riding (dirt bikes and quads) and I had a 14’ covered trailer that I always day dreamed of converting it into a sleeper but we already had a travel trailer so it never went anywhere but a dream. Glad to see you did it and thanks for sharing it with us.

  • @jqedjohnson796
    @jqedjohnson796 4 роки тому +19

    I give you points just for doing it yourself. Then I give you points because it’s cool. Then I give you points for doing a good job. Happy trails

  • @dougrogillio2223
    @dougrogillio2223 4 роки тому

    I did all this in 2003 when I was faced with getting my camper & ATV's to the hunting lease, in one trip, 350 miles away. This was just before even toy haulers came on the market. Commercial campers are made of balsa wood & paper-mache. I settled on a 16' cargo trailer & I still use it. It has two beds with memory foam mattresses, HVAC, a 21 CF Fridge, 6' kitchen countertop, sink & outdoor cooking setup. The whole rig cost $5200 finished. I have put thousands of miles on it. Necessity is the mother of invention.

  • @ultra4suzukisamurai679
    @ultra4suzukisamurai679 4 роки тому +13

    Super cool! Add an awning off the back over the trailer for a covered deck!

    • @CodeBrownProductions
      @CodeBrownProductions  4 роки тому +10

      I plan to add a 270 degree awning that covers the deck and the door of the camper. Can't wait!

    • @nomex1996
      @nomex1996 4 роки тому

      Love it!
      I am starting to look at how to haul and spend the night with my ground up restomod 1949 CJ3A - M38 #SnugglesTheJeep
      Stealing some ideas. Thanks!

    • @garyaaron8425
      @garyaaron8425 4 роки тому

      This was awesome and thank you for sharing. I go to Moab frequently to camp with my kiddos and this was pretty neat. My only two suggestions are: protect the propane cans/lines inside and out and for the windows/door trim utilize vinyl trim and build a ledge-ish for the winows...easy to bend/glue and paintable. Good luck and can't wait to see more.

  • @michaelreis7010
    @michaelreis7010 4 роки тому +1

    Don't listen if there is negative comments , you've done a great job better than most people could do and it's what suits you not anyone else. . Also if something isn't right you can change it as you see fit.

    • @CodeBrownProductions
      @CodeBrownProductions  4 роки тому

      Thank you! I would say 99.9% of all the comments are really good and helpful ideas. I've only had maybe a handful of trolls comment. I decided to go this route because I like building things and like you mentioned, I can fix or change whatever I want lol

  • @alcopower5710
    @alcopower5710 4 роки тому +46

    I’d build a fold down table (like a Murphy bed) to help keep an open space when not needed.

    • @Jake2670
      @Jake2670 4 роки тому +1

      or one of those pivoting mounts that swing out n come off too, lot of camper van ppl use em - can b homemade or couple companies sell em

    • @juliapernicka2698
      @juliapernicka2698 4 роки тому +2

      Jake2670 a lagoon table

  • @jasonthacker9884
    @jasonthacker9884 4 роки тому +18

    You should turn the bed into a murphy bed so you can make the frame it sits on now into a couch/storage area. In the corner across from the door put in a counter top with the fridge under it and set up a rack on the deck side under the one you already have for an outdoor kitchen area with like a grill and sink that can be put away so you can water to the kitchen for cooking and washing hands and stuff. Also set up an outdoor shower off the the driver side of the deck with some type of rack to hang a curtain. You would still have plenty of room for cabinets around the top. Just some ideas I had while watching but you have a great design so far just a few tweaks would make this thing amazing

  • @pamm2230
    @pamm2230 4 роки тому +9

    Think about designing the ability to put up a canopy over your Jeep/deck area. This would allow for shade from the sun or rain if needed or wanted. You might want outdoor cameras for security of the back area along with lights. You might also want a window looking out towards the jeep deck area. Great design for your hauler. Thanks for sharing.

  • @vroddestroyer300
    @vroddestroyer300 2 роки тому +1

    I am glad I found your channel. I am beginning a build like yours using a 14 ft. dump trailer as the platform. Building the bug-out part on a skid that loads and unloads . Your build has given me so much information and I really appreciate your hard work. Well done!!!!

  • @luciferofazaroth
    @luciferofazaroth 4 роки тому +24

    I would do low powered cameras for your blind spots on the outside of the trailer. So you can see all around you while you are in the trailer and not just the windows

    • @biglo9889
      @biglo9889 4 роки тому +2

      we have those on the limo buses i drive. those back side cameras are life savers. good idea.

    • @JonathanBaileyn2u
      @JonathanBaileyn2u 4 роки тому +1

      Great idea!

    • @noloveinatl6530
      @noloveinatl6530 4 роки тому +1

      I thought the same thing just thinking ahead and being safe

  • @BILLYRENK
    @BILLYRENK 4 роки тому +11

    Great job! You should patent that design. Motorcycle/jet ski version, etc. Love it!

  • @yardsausage
    @yardsausage Рік тому

    this just now popped up in my recommended and i just noticed its 2 years old..im sure by now you have completed it and have had many wonderful journeys it it..great job.

  • @contrabassbob
    @contrabassbob 4 роки тому +4

    Slick! Maybe have a way to have a canopy over the Jeep part in case it's raining so you can sit around.

    • @CodeBrownProductions
      @CodeBrownProductions  4 роки тому +3

      Check out my next video lol thats exactly what I'm building..........but with a useful twist!

    • @zamira08
      @zamira08 4 роки тому +2

      Like a retractable awning connected to lip of the roof

    • @CodeBrownProductions
      @CodeBrownProductions  4 роки тому +2

      New video posted, see if that works for ya lol

  • @alanpalmer4143
    @alanpalmer4143 3 роки тому +3

    That's a nice looking bit of kit, looking forward to seeing the finished setup.

  • @RC_Trailblazers
    @RC_Trailblazers 2 роки тому +7

    I can't believe I haven't found you sooner, I've looked up so many videos, Bug out related, Camping, Hauling, You name it I've probably looked it up. You have literally done what I'm currently working on doing and I'm pretty stoked to see your outcome! I haven't watched your other videos on this build yet, But I'm going to check them out right after this video.

  • @SOEtacticalgear
    @SOEtacticalgear 3 роки тому +1

    Pretty cool. Inspires me to get back on my cargo trailer build out

    • @CodeBrownProductions
      @CodeBrownProductions  3 роки тому

      Holy shit SOE commented on my video. I love you guys! You guys make some amazing gear! Thank you for the kind words.

  • @preppermcprepperson
    @preppermcprepperson 4 роки тому +12

    Hell of a job so far. I’d rethink the black color. It does look cool but I bet that’ll get really hot in warm weather.

    • @CodeBrownProductions
      @CodeBrownProductions  4 роки тому +12

      It was by far the best route as I wanted to use the bed liner for the external for its durability, and obviously didn't have a choice in color. I also really love black, my jeep and my truck are both black. Last reason was I really want to do winter camping and its mostly cold where I go so black works out. Plus with the amount of insulation I have on it I think it will be able to offset any heat gain from the color I get in the summertime.

    • @jonathanbrowne7138
      @jonathanbrowne7138 4 роки тому +7

      @@CodeBrownProductions check out DuraBak....at least consider painting a lighter color....you’ll bake in warm weather with the black exterior.

    • @JonathanBaileyn2u
      @JonathanBaileyn2u 4 роки тому

      Possibly the "dip my car kit" to experiment?

    • @jimmydafish
      @jimmydafish 4 роки тому

      What about painting at lest the roof white.
      And or a 1/ 4vway down the sides. Angle it like the front angle?

    • @preppermcprepperson
      @preppermcprepperson 4 роки тому

      I live in Texas so half the year it’s hotter than balls, that’d be my focus. Not sure where you’re at. Either way, hell of a build. I’ve been looking at toy haulers to get out with my side by side. I bet yours is about as cozy and at least half the cost.

  • @gen157
    @gen157 3 роки тому +2

    The box reminds me of a sleeper cab for a semi. All the correct angles for that sort of thing. Nice build.

  • @rolandrockstarmega1299
    @rolandrockstarmega1299 4 роки тому +8

    Love your trailer.
    Get a mini split.
    A/c with heat pump.can run it off your honda. Get the extended run gas cap.game changer.
    Diesel water and air heater would work well.

  • @ChrisRasch
    @ChrisRasch 8 днів тому

    Beautiful job! For future reference, you can often get bus windows inexpensively from people doing bus conversions.

  • @metalman69201
    @metalman69201 3 роки тому +5

    Looks Great!! Even the most simple projects can be very time-consuming because of all the planning and you have to think quite a ways down the road kind of like your steps being wider than your door. My buddy used to say if you think a project will take two weeks you need to double that and then go to the next unit of measure so a two-week project will actually take four months. Lots of truth to that statement!!

  • @alpharemoval2046
    @alpharemoval2046 3 роки тому +2

    Wow.. you literally built this how I planned for years. Thats WILD and also amazing

  • @IronGordon
    @IronGordon 4 роки тому +4

    By far the best diy crawler hauler in UA-cam. Good job man!

  • @DeadeyeLefty
    @DeadeyeLefty 3 роки тому +2

    Cool build, thx for posting it.
    The reason you normally have a regulator at the tank in an RV or a boat is because the tank pressure is around 125psi. Downstream of the regulator is only a few psi.
    If you have a failure in a high pressure line, you'll hit the Lower Explosive Limit long before the ethyl mercaptan in the propane tells you there's a problem.

  • @stevehei8035
    @stevehei8035 4 роки тому +9

    May I recommend a Diesel Air Heater which you can get on Amazon for less than $150 and only needs 12v to run the blower and glow plug. It is made for campers and big rigs for comfort heat. I use mine to run a 10x12 greenhouse.

  • @scottkissee1880
    @scottkissee1880 3 роки тому +1

    Life is a trip!!! Then you take one !!!! Your on your way to HAPPY CAMPING YOUR DOING A GREAT JOB.

  • @jasonsodyssey
    @jasonsodyssey 4 роки тому +22

    Awesome build. I would recommend using some pvc sheets, you can cut them on a table saw and bend them with a heat gun to match the curvature of your windows to hide the insulation. After that you can install your windows, trim, and caulk.

    • @manuelester7420
      @manuelester7420 4 роки тому +2

      I was going to do that in my safari van, up until I heard that PVC plastic let's off a poisonous gas. V.O.C's
      It's even worse in a black vehicle because it off gasses more when it gets hot.

    • @jasonsodyssey
      @jasonsodyssey 4 роки тому +1

      @@manuelester7420 well shoot, I didn’t know that. Good looking out.

    • @jasonsodyssey
      @jasonsodyssey 4 роки тому +3

      @@manuelester7420 maybe some good ol 1/4” steam bent cedar strips would do the trick.

    • @manuelester7420
      @manuelester7420 4 роки тому +5

      @@jasonsodyssey I love cedar in the van, because it repels many different types of insects and it's mold resistant.😃👍

    • @OoavastoO
      @OoavastoO 4 роки тому +2

      Could he also use a second set of (good used) RV window frames, cut to fit the gaps in his current windows? It would give a factory type finish but not sure how fiddly that would be to cut and install. Probably totally not worth it financially either, if he has to buy them new. 🤷‍♂️ Just spit-balling.

  • @mannihh5274
    @mannihh5274 4 роки тому +1

    Nice build, but lot of work and certainly quite some money.
    I live in Germany, here the car's registration tells you the weight you need for the hitch - usually it ranges from some 100-200 lbs. Never heard of a car with 800 lbs on the hitch. You are absolutely right about a trailer beeing a death trap if not properly balanced, so please check again. Healthy and successful new year 2021 for you, your family and all your friends!!

    • @CodeBrownProductions
      @CodeBrownProductions  4 роки тому

      I own 1 Ton diesel truck. The max tongue weight that its able to carry is 1500 lbs. Ive also added an airbag suspension for increased towing capacity and stability. I love my truck lol.

    • @mannihh5274
      @mannihh5274 4 роки тому

      @@CodeBrownProductions Wow, that's a very impressive capacity !
      I'm curious, do you need a class A commercial licence?

  • @mixflip
    @mixflip 4 роки тому +123

    Very cool. Everything you need to survive comfortably in remote locations.

    • @williamharbuck8575
      @williamharbuck8575 4 роки тому +2

      @John Peter have you lost the ability to speak friend ??? I know numbers you can call to talk to a human once again and pry that face away from that cellular device/ PC/ whatever made you forget people talked face to face before the interwebz. Some say it was a more simple time....

    • @pinheadlarry9495
      @pinheadlarry9495 4 роки тому +1

      @John Peter lol you're right lol. And why did this guy spend so much money while he was trying to save money lol, like anyone could have built that much better and far cheaper

    • @pinheadlarry9495
      @pinheadlarry9495 4 роки тому +1

      And for the original comment, I dont think this guy put much thought into "survival" for the reason he built this monstrosity. And really? That's not even necessary for survival or comfort. So. Maybe you need to get out more? Idk, you seem very naive

    • @CodeBrownProductions
      @CodeBrownProductions  4 роки тому +8

      Ahh yes the classic keyboard commando Proudly serving in his mothers basement since graduating high school with a GED. Thank you for your service Sgt Pinhead.

    • @pinheadlarry9495
      @pinheadlarry9495 4 роки тому

      @@CodeBrownProductions That's what you want to believe about me. That's because something I said rang true, maybe even poked a nerve, got under the skin, and you don't want to believe that there's someone with a shred of intelligence that doesn't think highly of you, your decisions, or your projects. Instead of choosing to laugh it off, or even point out how I might be wrong, you lower yourself to make lame insults a nine year old could think of to save face. But really, you know that what I said has merit. Obviously. So go ahead, dismiss me, use whatever descriptive insult you want, something that will stave off your bruised ego and satisfy your overdeveloped self-consciousness. It doesnt change the validity of the things I said. It doesn't change the fact that something I said goaded you enough for you to come back "swinging." I hope these things fester in your mind, make you realise what kind of wasteful and useless worm you really are.

  • @opusydaisy6563
    @opusydaisy6563 3 роки тому +2

    Would love to see the build. Maybe when we get back up to Douglas to visit our kids. I'm sure our boy would love this for his Jeeps.

  • @timsmith5032
    @timsmith5032 4 роки тому +3

    Really cool build and it looks like your attention to detail is very high. One thing I would suggest is changing your position on regulated vs non on running the propane in. I understand the desire to have each accessory run on it's own regulator. But in reality, they probably all operate at close to the same pressure anyway. Most propane accessories have an operating pressure of only about 1/3 PSI. While the tank itself, on a warm day, could exceed 150PSI of head pressure. As you set it up, it will work but if you put the regulator outside and run the accessories with their regulators removed, it will also work, as long as they have the right operating pressure given to them. But if you have a leak on a hose inside the cabin, at tank head pressure it will leak propane almost 500 times faster than at operating pressure.

  • @dencrepeau
    @dencrepeau 4 роки тому +2

    Nice! Built a camper out of a cargo trailer years ago, before "tiny houses" were fashionable, so I know what you're going through. You've done a good job with not only the build, but with the video too. Like how you intersperse pics throughout while you're talking... really good job. Thanks for posting!

  • @BlueCollarMafia
    @BlueCollarMafia 4 роки тому +3

    You can use crown molding around the windows to have more of a landing then you can put qtr inch around the window to fill the gap but this is an accomplishment to be proud of.

  • @TennesseeHomesteadUSA
    @TennesseeHomesteadUSA Рік тому +1

    6:00 RV salvage yards. But you usually gotta pull your own windows out. Many great options.

    • @CodeBrownProductions
      @CodeBrownProductions  Рік тому +1

      I check RV salvage yards. They all wanted near new prices. So I just bought new.

  • @ianhopkins8948
    @ianhopkins8948 4 роки тому +7

    This is a seriously impressive build my friend. Be proud of it.

  • @kayejaye261
    @kayejaye261 3 роки тому +1

    Looks great. Good suggestions in comments answered some of my questions. Think idea for aluminum roof b good idea. Look forward to future vids.

  • @marcelpotter7424
    @marcelpotter7424 4 роки тому +4

    Awesome set up! Maybe weld up a light frame around rest of deck weld some eyelets on the legs and you can throw a store bought tarp over it and bungee it down-great protection from sun and wont fly away in wind-keep up the great work!

  • @Sir--gx1wv
    @Sir--gx1wv 4 роки тому +2

    Perfect job! I personally would build a cage around the propane tanks that can quick realease with clips. Again great job!

  • @miguelcardoza4396
    @miguelcardoza4396 4 роки тому +3

    Awesome build !!! Proud of you for making it come to life!

  • @thomascox474
    @thomascox474 4 роки тому +1

    My recommendations for a bathroom is a bedside commode or a 5 gallon bucket with a seat lid. Either one cleanup is so much easier and less smell unless you spend the real big bucks for a composting toilet. Line with a trash bag and fill it with kitty litter. I'd also go mini split or window ac over a over priced inefficient rv rooftop model. Good luck with the rest of the build.

  • @mrvwcastner
    @mrvwcastner 4 роки тому +11

    you can add a bat wing awning over the deck and a stand up outdoor shower that mounts the water up top to heat from sun/solar.

  • @bryant8635
    @bryant8635 4 роки тому +2

    Really like this. I am surprised more commercial companies don't make things similar to this. Looking forward to the final iteration!

    • @victordominguez9860
      @victordominguez9860 2 роки тому

      You
      Yay living under a rock because a lot of smal companies that build campers have done this

  • @GeorgeWMays
    @GeorgeWMays 4 роки тому +3

    Really nice. You can see the thought and care that has gone into this project. Good luck; hope it turns out just the way you want. Appreciate the video.

  • @sgrandmasterj
    @sgrandmasterj 4 роки тому

    Pretty cool build. Thanks for saying no one asked for the video. Every video on UA-cam starts with people have been asking .

  • @branonjohnson8617
    @branonjohnson8617 4 роки тому +9

    Looks good dude!
    Theres a company up here in the attic (Canada), that builds these.
    Right around 20k to buy...
    Thats about 15 bucks American

  • @evanbrown9172
    @evanbrown9172 3 роки тому +1

    Awesome camper slash toy hauler couple ideas maybe is batteries I would keep inside for heat/cold and far as steps maybe get them off old camper and mount them under fold type but other than that awesome build and great ideas towards my own

  • @patlsmith404
    @patlsmith404 4 роки тому +5

    AUsome! I’d love to have that sweet cabin. ❤️

  • @jeffmorga7111
    @jeffmorga7111 3 роки тому

    I THINK it's GREAT.. I would have tried the window shades, on the bottom, so they pulled up, that way no one can see in.. And you dont need to get down to see out.. I guess it would have both advantage & disadvantage..to the pull up aspect..
    Looks great to me.. Putting more of you, and less money, has always been my choice.. Great work..

  • @jeffreyharville1918
    @jeffreyharville1918 4 роки тому +4

    A suggestion for your concideration, make a fold down table/cat walk that is level with the bottom of your door. As a table it could be used outside for whatever you wish. As a cat walk you could go from inside to the bed of your trailer without having to step down to the ground. My thoughts on the fold down is to make it like the seats from an old military duece and a half, with several hinged legs to match up with pockets on the FRAME of your trailer.(At an angle)

  • @why-be-normal7014
    @why-be-normal7014 4 роки тому

    All looks great. I didn't read all the comments so if anything I say was said sorry. For your generator What about building a cage around it with some type of latch with a heavy duty lock so it cannot be removed but bolted to the trailer so there's no noise. See if u can mount the batteries under the trailer possibly closer to the axles to balance weight. I would also come up with a clean water tank under the trailer with a solar water pump to get washed. All looks great so far u are going to have the vel also charge the batterys wile driving to your destination I hope. Looking forward to seeing the progress.

  • @redwardstone3651
    @redwardstone3651 4 роки тому +43

    Super simple addition: cover up those tanks/pipes. God forbid all that work you put in gets f’d by a rock or something

    • @lvl3472
      @lvl3472 4 роки тому +2

      or stolen put them in a lock box it happens way to often here in california

  • @meciepascoe3250
    @meciepascoe3250 2 роки тому

    Good job it looks great as for your solar batteries later I would stick them in the WeatherTech box when you get one and you can hang your shovels chains and other stuff on the wall the generator idea is great I like how you put the rubber underneath the mounts to keep the vibration down good job

  • @joyceb.sachsesachse1242
    @joyceb.sachsesachse1242 Рік тому

    Good job , heavy duty and would never find a r.v. type as nice as this , besides a perfect two person bug out rig . Love it ...

  • @johncrane2276
    @johncrane2276 4 роки тому +5

    U did a great job I'm impressed

  • @d.mcdave8880
    @d.mcdave8880 4 роки тому +1

    Nice job. I did a cargo trailer conversion many years ago. Have really enjoyed it. You will enjoy it even more with the A/C. Keep a window or 2 cracked a little just for some fresh air, You sealed that up pretty good. Motion detector lights help also. Good luck and Have Fun.

  • @paulkravitz4306
    @paulkravitz4306 4 роки тому +8

    Move the ladder to the curbside and install a camper awning on the back.

  • @AZTECA_FISHING
    @AZTECA_FISHING Рік тому

    Nice nice nice, what a good idea to make a little camper on your trailer nice job, good for long drives, or even camping

  • @zach1258
    @zach1258 4 роки тому +55

    Definitely need to install amber clearance lights on all 4 roof corners, the DOT will ticket you for not having them

    • @Cp3659
      @Cp3659 3 роки тому +29

      Just throw two straps over it and act like you are hauling it.

  • @floydallen9885
    @floydallen9885 Рік тому +1

    Very nice. You did a great job on the trailer.

  • @RV_Chef_Life
    @RV_Chef_Life 4 роки тому +3

    Looks great, my only suggestion is try to find things used. I’ve been traveling and full time rving for 4 years and RVs are like boats, parts cost twice as much. If you are lucky, you might find an rv salvage place that sells used items. For bug out situations, I highly recommend a composting toilet. For can build them for $15

  • @MIKEH.777
    @MIKEH.777 3 роки тому +1

    If you want some ideas, 26" steps just center the door, the generator you could put in the truck box on the deck with your batteries and drill some holes out the back of the box down through the deck and to the front and in because you already have the holes up front, and make jam extensions for the windows and the door out of your paneling and glue them in or fasten them how you put up the panels on the walls, You are doing a fantastic job building it I love how its looking it is awesome thank you for sharing and God Bless you and your family 🔥💯💪🏼👍👍🙏🙏✌

    • @CodeBrownProductions
      @CodeBrownProductions  3 роки тому +1

      Those are all really good I ideas thank you! I'm gonna have to do some more research on them. I really need to make the steps tho lol

  • @GENECARP
    @GENECARP 4 роки тому +4

    Get some aluminum trim coil in black, cut a strip, 2-3” wide, whatever you need, it will bend around your window interior and finish that edge off..

  • @shenanigansofmannanan
    @shenanigansofmannanan 4 роки тому

    My only suggestion bud, is to put some sheet aluminum on the face of your sleeping cab to reduce wind drag of that bed-liner coating. It won't hurt you in short runs, but could add up in lost mileage and fuel costs for longer hauls.
    Otherwise, as a journeyman carpenter and fabricator it looks like a winner to me! Enjoy the benefits of your hard work!

  • @Ra5tadub
    @Ra5tadub 4 роки тому +6

    Cool build! Two recommendations for you after watching: Since you have carte blanche to put an A/C wherever you want, I'd go with a "window" mount A/C unit in the rear of the camper, as they are roughly $500 cheaper than the traditional RV roof mount A/C's. As for entry steps into the camper- look into brophy or torklift "scissor" steps that are big in the truck camper world. G/L with the build!!

    • @billcawthorne3114
      @billcawthorne3114 4 роки тому

      Ra5tadub I agree with the window mount AC. Roof mounts tend to snag on trees!

    • @teatonaz
      @teatonaz 4 роки тому

      @@billcawthorne3114

    • @pebblesthekat
      @pebblesthekat 4 роки тому

      I agree on the Window unit and if it fails you can quickly buy a replacement almost anywhere.

  • @archieanderson2945
    @archieanderson2945 3 роки тому +1

    Great build. for your batteries make a battery box to mount under the camper near the front just behind the propane tanks. but locate them in a position to not make the tongue weight to much and mount a spare 20 lb propane tank in the event you are out longer than anticipated and think about a battery power inverter. and you mentioned water ! how about getting a shallow racing fuel cell with the foam insert to prevent the water from sloshing around and mount it under the deck between the rails. These fuel cells are made from aluminum and you cn get them in many shapes and sizes. Again great build keep up the great work.

    • @CodeBrownProductions
      @CodeBrownProductions  3 роки тому

      Those are some kick ass ideas. I already have a powered station installed right now, but I really like the water tank idea!

  • @whaumbatt
    @whaumbatt 4 роки тому +13

    If you haven't already, I would invest in an Equal-i-zer anti sway hitch. It will add to your safety and comfort. I would also see if there is a retractable awning that would fit your rig. Maybe have one on the door side and one in the rear. Also look into either shocks or Sumo springs for both your trailer and tow vehicle.

  • @mattbrodacki4980
    @mattbrodacki4980 4 роки тому

    Like the modular idea.. be really slick to add tanks onto cube and just lift on and off w forks when wanting cube.. great setup

  • @offgridmangogrower
    @offgridmangogrower 4 роки тому +4

    I want to see some recycled slide outs....keep that pro file while trailering but more comfort when at rest.

  • @PerryChild4122
    @PerryChild4122 4 роки тому

    Super cool, for the plumbing, I would get a rain gutter for the back and build a rain barrel catch with a pump sink leading to it so you can have a sink inside

  • @davidedward3725
    @davidedward3725 4 роки тому +5

    Maybe you could make a step that hangs off the stake pockets of the trailer, looks good though!!!

  • @jamesrobin9961
    @jamesrobin9961 3 роки тому +1

    When I built mine I immediately realized I needed a ceiling/roof mounted vent and (or w/ out a fan is up to you?) the adjustable hatch does wonders when providing good air circulation/ventilation also being a nice little “sky light” also. Consider a small solar power kit to help supplement power...they are nowadays inexpensive and very simple and pays for themselves quickly, easily upgradable. You’ve done great so far!

    • @CodeBrownProductions
      @CodeBrownProductions  3 роки тому

      Thank you! Since this video I've installed a Maxxair fan on the roof and ita awesome. I also installed two more solar panels and got a Bluetti AC200P for the power source. I love it so far.

  • @dvoz9023
    @dvoz9023 4 роки тому +8

    Love the build! You asked for recommendations and I have 2. You told you use a buddy-heater and that's fine, but I'm not a big fan of it. Better look into a diesel, or even better a propane heater. They don't poisen you with carbon monoxide and they don't create moisture inside. If you choose to use the buddyheater PLEASE buy a carbon monoxide and smoke detector. Just to be safe.

    • @mikel9567
      @mikel9567 3 роки тому

      You're an idiot. Carbon Monoxide is created from combustion. Any combustion heater is going to create Carbon Monoxide, be it Diesel or Propane fired. The Mr Buddy he has is propane fired by the way. You can certainly use them inside. CO detector mounted low, window cracked for ventilation and you will be fine. They are designed for interior use and have O2 sensors in them. Moisture is created from the heat difference. Not from the heaters themselves. This is called condensation. Good insulation and proper ventilation will prevent condensation. The heater type has nothing to do with it. Educate yourself before you post.

  • @WhiteManXRP
    @WhiteManXRP 4 роки тому

    I'd leave.....to never return...if I had that.. so awesome... this is a must have!
    Great,great job brother!

  • @rileyshields6395
    @rileyshields6395 4 роки тому +3

    Use glue on veneer that matches your inside siding, you could also buy wood grain tape from trailer manufacturers

  • @randallmeeker3407
    @randallmeeker3407 4 роки тому +1

    I put a small fold down wooden table from Ikea on the wall of my box trailer. It works great when up and folds against the wall when not in use. Fantastic build so far.

  • @SamCyanide
    @SamCyanide 4 роки тому +6

    That's interesting, but now you don't have as much room to take the wheels off if you end up getting big tires that stick out too far. For my setup I currently use an ambulance as my tow vehicle which has the rear converted to an RV that I did. If I were to use my pickup truck I probably would have just went with the truck bed camper to not waste room on the trailer. I guess if your situation is that you're towing with an SUV or something this is a pretty good idea

  • @jamesdimarzio3181
    @jamesdimarzio3181 3 роки тому +1

    Wow very impressive!! It looks simple.but im sure it took time between planning and building !! Again nice job you should.be very proud of yourself!!

  • @80rew
    @80rew 4 роки тому +7

    Should have done a fold up bed that folds into the back wall so you can put in a booth type dining table

  • @jayfromtexas6718
    @jayfromtexas6718 4 роки тому

    Fantastic! I stumbled across an airboat trailer that I picked up for this very reason. You’ve given me some ideas that will get me going. Great job buddy.

  • @docwatson1134
    @docwatson1134 4 роки тому +4

    Beautiful job, but I'm wondering how much tongue weight you have with this arrangement? I imagine with the jeep onboard it balances out, but can you tow it safely without a vehicle on it?

    • @bryanhersman4037
      @bryanhersman4037 4 роки тому

      Too much tongue weight is never a problem as long as it doesn't put you over payload or hitch limits. All factory built toyhaulers have a bunch of hitch weight bias otherwise they would go the bad way when loaded which is too little hitch weight.

    • @patricksmith3911
      @patricksmith3911 4 роки тому +1

      He said with the jeep loaded tongue weight was at 800lbs. Has a tongue weight gauge in the cab.

    • @paulintexas
      @paulintexas 4 роки тому

      Wonder what it is without anything behind the trailer axles? That camper looks like it's about halfway to the hitch from the axles-- that's 50% of the weight of it + the empty tongue weight + around 120 pounds on the tongue if those propane tanks are full. I'm guessing 1300-1500 pounds..

  • @mlrable
    @mlrable 4 роки тому +1

    You have done an excellent job, the propane tanks are excellent but I may leave the generator to gas and propane, your other choices are fine, I would have made the floor thicker to improve insulation.
    Don't be upset with your work you have done well.

  • @mariomcallen
    @mariomcallen 4 роки тому +4

    Why didn't you put the door to open towards the deck..and add an awning to shade your deck

    • @Smokeroux
      @Smokeroux 3 роки тому

      Probably couldn’t open door with Jeep loaded

  • @joshhunt5274
    @joshhunt5274 3 роки тому +1

    Nice rig I want to build one similar got lots of ideas watching ur videos n I love how u get help from ur old lady n she flips u off in the pic lol

  • @alphamontoto2047
    @alphamontoto2047 4 роки тому +4

    Hey man where have you been? 🤣🤣
    Just found your channel and subscribed.
    Awesome build. 👍

  • @JayshaunPatty-wf8pq
    @JayshaunPatty-wf8pq 8 місяців тому

    This is so cool man. This type of build would be great a great idea for guys that hotshot on the highways. Great video man

  • @toddreynolds7837
    @toddreynolds7837 4 роки тому +5

    Something I would consider, relocate the generator...... combustion next to the propane seems sketchy to me.....

  • @rowlinstoned3715
    @rowlinstoned3715 Рік тому +1

    Awesome idea man. I really like what u have done.

  • @yellow2000SR
    @yellow2000SR 4 роки тому +3

    Get ABS plastic and cut strips to go around perimeter of the windows and put the seam up top. Use a heat gun to bend it at the corners.

  • @thelthrythquezada8397
    @thelthrythquezada8397 4 роки тому +1

    Who cares what we think! You built that thang! Those thumbs down are from haters that can't or won't make there own. I converted my 2014 Kia Sorento in to a camper and I freaking love it!!!!! I wish someone would tell me they dont like it.... Would laugh at them for being boring.

  • @timlincoln2246
    @timlincoln2246 4 роки тому +5

    Put in a split AC unit - much more efficient.

  • @stevensiepp5532
    @stevensiepp5532 3 роки тому

    might be able to take the trim off on the inside around the windows and use aluminum flashing cut to size and painted black then reinstall trim to cover the insulation. great job on the build. mine is a store bought 23 foot toy hauler with a 42 inch led bar which really comes in handy boondocking