The 40 Pound Cassette Deck (with reel-to-reel compatibility) | Vintage Hifi Revival
Вставка
- Опубліковано 9 лют 2025
- Weird mid 70's piece of kit I've found, a reel to reel that can transfer to and from a built-in cassette deck. Never heard of something like this, but I actually really like it and I especially like that I only paid $20 for it. Fairly straightforward repair and restoration that I hope you also enjoy.
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
Akai made one with an 8-track in the side (best-sounding 8-track player I've ever heard, and that's saying something since I work on this gear for a living), and I think there was a version with all three formats - RTR, 8-track, and cassette.
Way back in the '60s, when I was a computer operator (IBM 360) we cleaned the heads - often - of the tape decks, no gloves. We got strange, white fingers - very little health and safety back then, and the fluid had a peculiar smell too. Mind you, it did remove the ink from our fingers which we got from the 1403 impact printer ribbons.
Good job, you approached the problem better than many other professional mechanics. All my audio equipment (AKAI/Pioneer) is from the early 80's, great, some quality, almost no problems after all these years. As for the residual foam behind the Vu meter, the meters are held in place to absorb shocks from transport. This also makes the meters last longer.
Wow, that was nice to watch. I bought mine in Japan around 1976 when i was still working as a merchant marine. I have both the GX1900 and the GX1900D. I had them cleaned a few yrs ago and still run like i just bought them. I also have the Akai GX630DB reel to reel recorder (without casette recorder) which i use the most, less mechanics inside.
This was entirely enjoyable for me. I’ve had several reel to reel units back in the 70’s-90’s. Brings back a lot of memories.
Glad you enjoyed!
Dude I'm in love... so the hunt is on, eh? Solid score broski!
Excellent job! I have actually seen this model before here on UA-cam, but I haven’t found too much info about this machine myself, so yes, it really is a rare one indeed… glad you were able to get it working again!!!
I love your videos. I have an Akai GX365 that I've long been very pleased with., I'd love to get a deck that caters for 15 ips and 10 1/2" reels but they're pretty expensive now.
Nice job. I've lost count of the number of 'dead' akai machines I see advertised by sellers who clearly don't even try lifting the shutoff lever. I think it's obviously a generations thing. I grew up with these kind of recorders so it's difficult for me to grasp how someone can't understand how to use it. But what's common knowledge to me is alien to most people 30 years my junior, and no doubt vice versa.
in the seventies AKAI came up with a feature they called 'glass-ferrite' heads. These are tapeheads that are covered with a thin layer of hardened glass where the tape is sliding on. They claimed that the magnetic field is focused to the distance defined by the glass coating. These tapeheads are really not wearing out. (due to this they disappeared silently from the market - you can't sell a product that is not dyin at all)
These machines often only suffer from oiling issues and dust on resistor surfaces. Japanese reel to reel tapemachines were also called 'oiltankers' because their manufacturers often used industrial grade mineral lubricant that produced a typical mineral oil smell and hardened out over the years. These AKAI's are reliable like tanks.
You're wrong - the GX heads did not disappear - the remained in all Akai Reel to Reel decks up to the last one .
Those glass- ferrite heads sounds quite hard, it's no warm sound like permalloy heads.
@@tveasy5172 : That's a matter of entire circuits, not just a single component. If you can be bothered to analyze the impedance characteristics, then you can (if you care to) fix basically everything that an individual component will do except signal noise (all components, but especially resistors), and frequency mixing (technically all components, but normally only important for tubes & semiconductors; this is actually a type of noise itself).
@@absalomdraconis Yes, indeed the whole circuit around head is matter. And it's costs a lot of time to make it sounds good the way you recommend. Maybe for any specific deck what is really important part of memory it does the right approach. But I refer to sound of new deck, because I'm old enough to remember the sound of fabric adjusted deck out of box, smelling new. Those early 80s.
You're forgetting the achilles heel of these units: the cams. They were made of a cheap pig-metal and at this late stage will turn to dust if not gone already. Otherwise yes, they are incredibly durable machines. I have a M-9 rebranded for US market as Roberts 800X. My friend machined new cams and it's been running smoothly for over 12 years for me.
I had a similar model but instead of the cassette it had an 8 track player/recorder on the right side and 2 speakers. Great video !
It is probably foam rubber that has been behind the level gauges. probably so that they don't hit the plate and thereby create noise. Keep in mind that it was probably a premium product
Yeah in most things I’ve seen that foam turns to dust haha
I think you will find that the motor is fixed speed. The switch is only for equalisation. Open reel tapes use a different equalisation for 7 1/2 verse 3 3/4 These Akai's had a physical adaptor that screwed over the capstan of the open reel part to adjust the speed . The speed of a compact cassette is 1.875 inches per second. That's how this system can work. The motor is fixed speed. The speed is adjusted by adding or removing the adaptor on the capstan and then the equalisation is set by the switch. The poor quality of the cassette sounds more like the heads need a good clean or are worn. You may also find the unit could need recapping and possibly other components have drifted, contributing to the poor quality. When new these units actually had quite good sound quality and quite high quality recording ability.
Dead on! The cassette deck SHOULD only record at the one speed as the tapes would be totally useless for playing in any other machine. That speed, with the one exception being secretarial dictating machines that ran slower, was and still is the industry standard. TEAC reel-to-reels favored a switchable speed control rather than the capstan adapter AKAI used. I liked the TEAC recorders better just for that reason. No chance of misplacing that adapter and rendering useless a lot of tapes.
I have an Akai X-355D which is older than yours, I was told it was their first solid state deck. It's a 3 motor deck with solenoid controls, a built in power amp with 2 speakers (the speakers are just speakers but the amp puts out really clean sound). It weighs 80 pounds and came with an optional wired remote control. It also had a new Akai innovation - crossfield heads! This boosted the upper frequency response to beyond 20,000 hz. I had a later Teac deck but the Akai had better sound. Once smaller gap heads were developed Akai abandoned crossfield heads but licensed it to Tandberg who continued to at least the early 80s with it.
This deck also has track to track dubbing and a bunch of other special effects I never use. It does it by lowering or raising the recording head and playback heads relative to each other. There was also an available 15 inch reel kit but I don't have it.
A 15 Inches/second kit was a thing? That'd be something to find; those reels would be flying at that speed haha.
@@HifiJelly Not 15 inches per second, this was for the big 15 inch tape reels. Although the deck did support 15, 7.5, and 3.75 inches per second tape speeds. If you want to see the reels flying search UA-cam for Akai X-355 tape deck and there is one demonstrating the deck, it had the fastest rewind I ever saw.
This is quickly becoming one of my favorite channels! I would love to see more reel to reel and 8-Track repair videos.
Thanks! and without revealing too much, you're in luck haha!
Boy, I wish I had your skills. Thanks for sharing such an informative video.
These machines are so much fun. A few weeks ago my boss gave me an Akai 4000DS, which I've already been using for recording drums, and a Pioneer RT1011L that I haven't even plugged in yet. It has a bent spindle and I'm harnessing some chi before I dive in. Glad neither have the cassette or 8track as I'd feel the need to use those features lol
Lovely video!
I've never seen a reel to reel with a cassette player, but I used to have a reel to reel with an 8-track player built in.
I admire your patience
I used to have an akai X-1800-SD, it was a reel to reel recorded with a built in 8 track recorder on the side. What was interesting was the fact that the 8 track player’s capstan was the same as the reel to reel’s, so when the speed of the reel to reel was changed it also changed the speed of the 8 track as well.
That's a cool machine and you did great at repairing it.
The stuff on your reel to reel tape heads and tape path are a result of Sticky-shed syndrome from someone running a deteriorated tape thru the machine. What many don't know is if the unit is not cleaned after running a bad tape thru it, the bad tape can destroy every tape that is used after as it transfers the deteriorated oxides to the next tape used and so on...
Thanks for the info!
@@HifiJelly definitely sticky shed syndrome. Tape from the late 70's into the early 90's, all brands, all types, audio and video, had issues with the binder that adheres the magnetic oxide to the tape base. Some professional studio master tapes have deteriorated so badly, they are unplayable. You can "bake" the tapes at low heat to revive some of them enough to make a copy.. Just look up sticky shed syndrome in a Google search. Some pre sticky shed era have an issue with the lubricant in the oxide drying out.
Nice job on that Akai deck! FYI-Akai also had a deck that combined reel, cassette AND eight track in one unit-the X2000SD.
Now that'd be a find!
Yup, they sure did. The eight track deck was on the side, it was in the 68 Lafayette catalog
Aloha , I actually have an X2000S , I got it out here in Kona Hawaii , I managed to get all 3 working , the 8 track even works , it's an amazing machine but
it does need an overhaul , it is in line but on the back burner . Thanks for the great video BTW .
Beyond Mechanical..............Was a good watch, close-up details is what sets this apart from others..
I had the 8-track version of that player. It also had the built-in speakers. The speakers were covered by these hinged metal doors/flaps that you swing out when using the speakers. Those variable resistors can usually be cleaned up by just rotating the control full sweep several times to clear off the crud off the wiper contact, or worse case a shot of Deoxit.
Duuude! What a fantastic find! Great job with the cleaning and lubrication. Those hissy tapes at low speed would be great for some effects loops lol. Great reel to reel machine for 20 bucks man 😍
Haha thanks! Truly anyone making low-fi needs a reel to reel and cassette deck
I had an akai reel to reel with glass heads back in the 70's. More than a piece of electronics it was also a beautiful piece of machinery. A girlfriend took it.
Shame, I’ve noticed the AKAI’s really all have a fantastic aesthetic to them.
Instead of paper as cushion i like to use the fuzzy side of some velcro. Also for those corners, maybe some small road case corner protectors? Not original but would definitely give it a more industrial look.
Good job you made there. Seems that the heads need demagnetizing though to lower or fully cut the hiss
My first tape recorder was a Grundig with half big reels. Only later when working in a studio we only used Revox. B77 and most of them A700. I still have a A700.
You've gotta live in the Tampa Bay area: I saw one for sale recently and dithered as I have a room of broken equipment. Naturally, I regret dithering!
wow! what a deal! i had a radio shak reel-to-reel back then and i paid $50 used. i did sound on sound recordings. i also
taped music shows off my stereo.
i just found one in a electronics recycle dumpster a gx1800sd it records 8 track tapes to in great condition same easy fix issues ...
AKAI & TEAC were the favorites of military guys in the 1970's. I was tempted by the AKAI but bought a TEAC 2300SX in 1977 (in US Navy) at the NATO AFSOUTH audio center in Naples, Italy. It was much smoother overall than the AKAI, and gave me well over 40 years of reliable service 'til I downloaded all the old tapes to iPod. Us old farts have to upgrade eventually ! :)
Go swap the deck 🤡
Gotta love a GOOD degausser tho. Need em to clear the metallic head on most cassette, 8 track, and reel to reel players to reduce static crackle and muted tones or volume....
If you record or play a lot of tapes a degausser is a MUST have. Just have to be very careful so as to not let the tip touch the heads. That thing vibrates pretty badly the closer it gets to metal and can scratch or otherwise damage the heads. Some brands actually had special pads glued to the tips to help prevent this. My first Gibson didn't and I lived in mortal fear of accidentally damaging the head son my recorder. The Robins I have now does have that but I am still very cautious in using it.
As I'm sure other people have said it will be bad capacitors and possibly the record play switch needs a good clean. Great video x
Thank you!
As far back as the middle 60's I have always had a reel-to-reel recorder of various types. Compared to the Chinesium JUNK being sold up until recently, these old reel-to-reels were built like a tank! They were very solid and built to last. Even today I still have two identical TEAC reel-to-reel recorders in my system. The only thing I have had to do to either of them was to replace the drive belts. While I prefer TEAC's, AKAI's were really good. The Roberts recorders often seen are just rebadged versions of AKAI's. There are still a lot of pre-recorded tapes on the market today. The biggest thing to look for are the ones that have been redubbed from originals due to tape age or damage. If the equipment operator was really good at it, copies are not all that bad but often I've found redubbed tapes that had so much noise that they could be irritating. The only reason I would redub a tape would be damage on the original such as substrate deterioration or edge rippling caused by badly aligned equipment or having been exposed to heat. In cases like that you really have no choice if you want to preserve the sound. The drawback to tape now is the same thing that has hit the CD/DVD market, lack of blank recording medium. With the outrageous explosion of streaming audio/video the manufacturing market is fast disappearing.
You are very right that it’s not a Chinese junk but ever lasting machines. Actually. In India I raised up with the British reel to reel machine FERGUSON and a PHILIPS made in Austria. Right now I’m enjoying my Akai GX4000-D in Canada. But I’ve problem with the spindle of the spool carrier. If you know there is somebody who can fix it please advise. Thank you
I would say 40+ years on Teacs held up better than Akais. Akais these days tend to have either noisy transistors or crappy pot metal parts (particularly the cams) which are turning to dust.
Keep in mind this machine was built at a time where cassette technology was just starting and sounded awful with music. Chrome, and metal tapes with Dolby did not come about till the late 70's early 80's when it was possible to rival CD's with right equipment. That slow moving cassette tape is not going to match the sound quality of the faster reel to reel in this time frame.
Just picked up a refurbished Akai 1800-SS, that plays and records Quad reel to reels and Quad 8 tracks! A lot of the same features and knobs as this one!
Have one of these at work. Remember moving it around multiple times. HEAVIER than it looks 😂😂
This is a mostly great repair video. A few points though...
1 - JIS stands for Japanese Industrial Standards. So, if it's Japanese and made any time in the late 50's onwards, it has JIS screws, even if there is no dot. And, even if someone has already been in there with a pozi or a crosshead driver and chewed them up a bit, a JIS driver will still mostly fit and work. Buy a set for 10 bucks and use them.
2 - Sewing machine oil is a good shout. Far too much of it though, and when you use too much oil, it will eventually make it's way onto things that do not need oil! Use a cocktail stick as a dropper to apply a tenth of the oil sprayed on some parts here. Also, the grey stuff on the mechanism plates? Clean that off with IPA and use a very small thin film of Molybdenum grease because the original stuff will have dried out and will cause sticking. As for the beige (once white) goo on the spindles, a light lithium gear grease is good. Just don't use too much.
3 - You stripped and rebuilt the whole cassette mechanism but didn't replace the pinch roller? Ytho?
4 - Obvious trolling (34:44) with Sony reels on an Akai!😁
Thanks for the advice! I've heard the masses and have order some JIS screwdrives haha, and I've never considered that a pinch roller would be a pretty generic part to just have on hand so thanks for that as well!
Personally I prefer to use teflon based oil. This is very thin oil, excellent for clocks and watches, that doesn't thicken over time. You can also use silicon grease. Remember to always clean the capstan after remounting it because as it passes through the bearing it gets greased, so a good alcohol clean afterwards avoids grease on your tape. Rubber surfaces can also be cleaned with alcohol.
To service this unit you have to order two separate belt kits. The reel to reel kit is the same as the standard model and the belt kit to the cassette is the same as the separate cassette deck they sell. I do not remember the model numbers anymore that you need to order as I haven't seen one in for service in many years. They also made a model with an 8-frack recorder in the right side of the deck. The model you have is from the seventies and may have had the belts replaced by now.
Congratulations !
I watch all the videos you post with great interest.
If you allow me a piece of advice,the heads of the reel tape recorder and cassette tape recorder,must be demagnetized with a demagnetizer.
After this operation,the clarity of playback and recording is excellent.
Thanks!
The whole concept on this casetteplayer, tapeplayer is awsome. With speakers it must have bean perfekt.
I think that case was a holdover from another model and they just used it on this one. The reason I say that is there is just NO room in the case for the amps that would be needed, such as the Roberts and Akai's had that did have built in amps. Those amps were pretty big.
Wish I stillhad my 3in one Akai ,reel ,8 track ,cassette, brought it back from Vietnam 1970
That horrible noise might be due to bad capacitors! Akai never made a product that presented it self like this at that time!
It is really amazing what they did back in the day, speaking of over engineering 👏.
Recap this machine and you will be in for a treat! Than and only than you will experience how Akai ment it to be! Good luck!
I didn't film it, but I think part of the noise was bad grounding on the amplified board. The screws holding that board to the chassis were pretty loose, similar to how the motor was loose.
Love this...I own many reel-to-reel tape players, I also have this make.
Good job!
If anyone ever has the chance to buy a reel to reel just buy it.
The sound quality are superb.
Lots of clear highs and full bass.
In the UK we have amazing music everynight on stereo FM radio, hiphop, dance, trance, everything in perfect quality and i use a reel to reel to record it.
Do it!😊
New belts,cleaning and some TLC will get it going like new.
🤨 As for your assumption of the motor fan drawing the air in ~ it should be blowing it out as that is where the heat collects = the motor being in the top of the unit
This is part of a series of Akai that included 8-track recording as well. The units could do input signal recordings on the majority of the upper line units. Very popular with servicemen since all three tape formats were available. A majority of the problem with that particular unit may be in the capacitors in the amps.
They made one with 8track player also. Never seen one with a cassette deck 👍🏻
Guess someone didn't look on ebay.all kinds of belt kits.
Use acetone to melt the threadlocker. Also buy yourself a JIS screwdriver, you will thank me later.
JIS screwdrivers (Vessel Brand from Amazon) are a must!
@@firecatfly i learnt about the vessels from 12voltvids, can't be happier
@@firecatfly ļķĺq1
Very beautiful find love it
Thanks!
cheap cassettes had a lousy tape running at 1 7/8 ips as opposed to reel to reel which would record at 7 1/2 ips. they
were only good for voice back then. the signal to noise ratio was bad.
Those were the good old days, open reel from Akai. I used to have one too in the 70’s, nostalgic. Just leave it the way you find it for display, don’t bother getting it going again.
wow, 20 bucks, great steal
I had no idea this was even a thing. Like you say it must be quite rare.
Like it. I had a GX 3 head Cassette deck once that was modelled like a reel to reel but was just cassette. Almost as tall and heavy. Speed control, motorised panel to open close for more buttons. Only dolby B. and I think it only did normal and chrome tapes. I modded it myself to be able to change the bias on the fly whilst playing whilst recording (3 heads...) . I believe your example here would only do "normal" FE tapes?
I think so as well, it’s a very basic cassette mech with no noise reduction or tape selector.
Great video, but you did have the record levels for the transfer way too low, the peaks should be set to just flick into Red zone, for optimum recordings
Correct
How did you get it that cheap😮. I got an M-10 for $140 😤 in India. I managed to get it barely running. Still tons of work left. Anyways, you've done a fantastic job with that restoration. It needs a lot of patience. Keep up the good work 👍👍
Tape tensioner needs setting .You also need a proper screwdriver.Good job done.
Almost all the screws seem to be posidrive rather than phillips. Phillips screwdrivers make a mess of pz screws. I think they are much more common outside the US. Interesting video it's such a shame this sort of mechanical engineering is dying out.
I had seen the reel-to-reel with a 8-track, but never with a cassette player by Akai.
I would've assumed the cassette mechanism had its own motor. I'm surprised they went the more complicated route with more belts and pulleys! Interesting!!!
Indeed, I suppose they wanted everything based off the speed of huge fly wheel to keeps the tape speeds consistent with each other, as electronic speed control probably wasn’t great back then.
That is really interesting that the cassette deck speed is tied to the reel-to-reel speed. Your only option for any dubbing would be 3 3/4 IPS on the reel-to-reel, in either direction. I wonder if the reason your test cassette was especially hissy was because the cassette deck isn't calibrated to play or record tapes at high speed. It would be interesting to know if you get better results with a 3 3/4 IPS source (and therefore recording at the proper 1 7/8 IPS cassette speed).
Some equalization need to be changed when changing speed. Only been inside the UHER 4000 series and they speed lever also moves a switch specially to correct equalization.
@@38911bytefree This one does as well, on the bottom right theirs a switch to change the equalization between 3 3/4 and 7 1/2 tape speed.
Машина зверь! Автор правильный чувак.👍
Впервые вижу такое тщателное восстановление древних механизмов..
Обычно восстановление таких сложных ЛПМ заканчивается лёгкой халтурой..
I have akai x2000sd cassette cartridge&reel. 4 track reel casset and 8 track with speakers pretty cool ill have to do the same rehab
The last time those heads were cleaned was at the factory.
Agree fully! Properly cleaned and degaussed heads should not hiss like that. True, with the cheaper brands of tape you will get some hiss but not like this machine is doing.
I'm thinking the cassette deck can record and play back at 3.75 ips and not 7.5. It sounds exactly an octave lower on the Sony cassette deck. A cassette is 1.875 ips normally but some decks gave you the option of a higher speed for better quality but sacrificing time and would only be good on decks with that extra speed. That being said, I'm thinking the cassette deck may have needed demagnetized, the bias was incorrect, or both. If it was made in the 1970s, the older stereo decks didn't have that great of a frequency response like they were able to achieve in the '80s and '90s with the HX Pro feature on some decks. Mechanically, it looked like it was very well made, it just needed cleaned up and you did an incredible job on the whole thing. Very cool!!!
learned a lot, thankz hifi jam...🙂
wait til you see the one that had the 8 track built into the side- yep they built it. The reel to reel was the centerpiece though.
I had that real to real
White built in speakers
Good job 👍
those aren’t phillips screws, the reason they are worn out is cos someone used phillips screwdrivers on them, they are JIS screws lole
Haha yeah, I really need to get a set of JIS screwdrivers.
I believe those are JIS head screws, not Phillips. A Phillips driver will kinda fit but the JIS drivers fit perfectly, no slipping.
Akai is absolutely excellent.
Hi I own the Akai GX-280D-SS it is a four track version with electronic touch controls which engages the mechanism for the reel to reel machine. Recently as I play music it would suddenly speed up audio sounding like the chipmunks music. Do any of you who may have owned or serviced these Akai Reel to Reel machines know what might be causing this trouble?
You want to move reel to reel tape decks on a regular basis in a radio station...good fun.
Love this one i have akai x1800sd and m9 which the are similar. Is yours for sale
Thanks for this job
It is for sale, you can find it on eBay if you search Akai gx-1900D
Be careful with all that oil, one little drop on a rubber part and it wont grip ever again. have ruined many capstan wheels by excessively oiling them.
That's one of the reasons why using grease is better in cases like this because thin oil can fling out in operation. and the other would be that oil isn't made for a lot of load, for example the piano key mechanism would need grease, having only oil on the surfaces will scuff them up after some time
Owner is very touchy-feely as if oh it feels so nice.
Make sure you knock before you come in.
@@HifiJelly. alright guys, let's keep it clean here. Kids might be watching. LOL!
What a beast! I wondering if you could give some advice on a reel to reel issue I'm having? My machine doesn't stop the tape after fast forward or rewind is stopped so the tape kinda just spews everywhere. I'm not really sure whats at fault.
While that is funny it sounds like an issue with the tape detection arm thingy; you can see it in the beginning of the video it's what I pulled up to turn on the machine. Those arms are usually mechanically linked to a switch inside the machine to cut power when the tape is pulled all the way through, so I'd start there.
@@HifiJelly, this can also happen if the brake pads are really worn. The brakes can't grip the turntable hard enough to stop the reel from turning. Replacing them can be hard to do unless you have a source of felt sheeting that has an adhesive backing and are really good at cutting it so the edges match the original. Sometimes you can strike gold on eBay and find a source of the parts but most sellers know what they have and the prices can be hefty. I bought a TEAC on eBay and the GORILLAS in the USPS managed to bend the shafts on both turntables even though the recorder was packed really well. I was lucky enough to find a pair of NOS turntables from a closed repair shop that were still in the factory wrappings. I replaced the damaged ones and the recorder still plays like new. I did save the old ones just so I would have these felt braking pads. On SOME recorders, usually the cheaper built ones, they utilized an external felt lined strap that would grip the outside of the turntable base and stop the turntable from spinning. While much easier to fix the quality of the recorder could be questionable.
Simgle motor runs both formats .
check the transistors as these are usually corrupt in these old Akai units .
28:00 looks like sticky shed too, old worn out tape binder
Do you know that there is a Japanese screw standard that is similar to Phillips but not quite the same?. Those could be that. I think they are often called JIS screws for Japanese Industry Standards.
i had a akia x2000 sd it was a reel to reel cassette and 8 track
I had one like that only it had an 8-track player as well. All three!
the 180 sd was reel to reel and 8 track-with 8 track recording.
TSTO Too Stupid To Operate GenZ's Main Title! Both of my Son's are under 15. Each of them knew how to thread a Reel to Reel deck before turning 10 years old. The sad part of growing up today is the more technology we have the DUMBER we are! Who agrees?
And WHO came up with the lame idea that the compressed and heavily edited sound from streaming audio was better than hearing the music in it's real-time format?
It was funny to see this because I just refurbished a similar unit only difference was the one I did had 8 track on the side and built in speakers along with cassette I believe your right has to be rare akia wasn’t to popular when they went to glass heads on the reel to reel certain tapes would squill when played but the higher end ones I have are excellent no complaints anyway just thought I’d chime in on that enjoyed the video
Polishing the tape heads with toothpaste may help getting rid of some of that corrosion. Just clean off the toothpaste with alcohol afterwards.
I thought about doing this, but the heads didn’t seem to be too bad. I do want to try it buy I’ll wait till I find some really corroded heads.
@@HifiJelly I recently did this with a Denon 3 Head deck which seemed to sound a little dull even after de-magnetising the heads. A polish with toothpaste brought back all the high end.
@@andrew1479 I've never heard of using toothpaste before. Does it have to be a specific kind? I've got an 8 Track player with a really worn and corroded head, I wonder if toothpaste might help that.
@@jimdayton8837 It's worth a try. Just use cheap plain white toothpaste. apply a tiny amount to a cotton bud. Use a gentle circular motion and remove the paste thoroughly after. Clean heads with alcohol before use.
I have a couple of these. I've never tried to turn them on, but they probably work. Nice rework! Did you find a service manual?
hi the 1800ss is a better decks when tape speed is over 3 3/4 you can't tell i got hold of some 1/8 tape reel to reel slave decks
someone died and left alot of tape dubbing gear so i know alot now how cassette's are done
Wonderful' machine it's incredible thing...very fine👍 courageous work👍 the belt with rubber can be used , and turn too slack after...it's not easy ...
Akai I stereo open reel recorder just build like this build like a tank 1721L it had its own speaker in the case. I saw something like the one on here with a built 8 track player
"Portable" is a relative term that needs perspective in some cases.
🤔
Portable usually means light weight and these things are far from that! Most from that era could really make you work to move them around.
Sounds like it needs a good cleaning but I'd take a risk if I saw one at that price. A set of belts could also help on both the cassette and r2r side.
So it's not just a cassette deck. So not sure how you can claim it's the largest?
Guess he hasn't seen the X-2000D . It also has the 8 track to the side .