Розмір відео: 1280 X 720853 X 480640 X 360
Показувати елементи керування програвачем
Автоматичне відтворення
Автоповтор
A minor correction - Number of identifiers for extended frame is 2 to the power 29. The video says 2 to the power 21. 8:52 of the video.
Sorry may be careless error. Thanks for correction..
In standard can they are using 2 to the power 9 instead of 2 to the power 11 for message I'd. Same way they are using 2 to the power 27 instead of 2 to the power 29 for extended can.
Thank you so much sir..that really helped me a lot.
Please share AUTOSAR tutorials IN DETAIL
Yes..
Actually can works on 3 layers physical layer ,data link layerand application late too. While flashing we use application right so
Can you plz suggest any app this related write test case's
Can you please share the another tutorial I.e expert level link to me.
Thanks for such a help Sir
Thanks so much bro ✨
Thank you for this, sir.
I checked CAN HIGH & CAN Low are 3.5 & 1.5V for transmitting dominant bit & not 3.75,1.75 volts as you mentioned. Please check once
I mentioned it’s 3.75 and 1.25vThis is correct Please recheck once it’s not 3.5 and 1.5..
No he is correct it's 3.5 and 1.5 v only for transmitting dominant bit and recessive 2.5
I meant the minimum and maximum
Superb class
why specifically 120 ohm resistor is used at the CAN termination?? From where this magic no. "120" comes?
Its as per Maximum power transfer theory !! Will make one video on that same
Can u share this pdf
Whatts app group not available in description 😒
chat.whatsapp.com/CHDmNk3ghhN3JDm5ygwA9K
@@EmbeddedWorldAutomotive this group is full sir.
@@shradhasharma2690hii are you working in embedded domain
Why Because of Data Link Layer and Physical layer why Not others why because of 120 Ohms resistor we are using
Physical Resistors can be compatible to Physical layer only
Why because of only 120 Ohms resistors placing end
@@kishorekumar5204 due to the length of the bus which is supposed to be below 40 meters
Any one Institute in hyd.... CAN PROTOCOL
Am not sure !! But we have online courses.. for details pls WhatsApp +91 8197646612
good
Please explain the meaning of the question and answer instead of reading the presentation. Error detection is not properly explained
Sure mam..will explain things properly
Nice 😕
Good
Is there any course for CAPL like recorded videos
Yes
@@EmbeddedWorldAutomotive can you pls provide what are the topics ur covering in CAPL
Upload automotive wire harness information video
Sorry for telling I thought 37th and 50 question answer are not proper answer getting
Please don’t be sorry, ur comments are always welcome..let us check it and update the sameThanks for the specific points..it’s really appreciated
For and gate dominant is 1
Check again
please anyone to share the whatsapp group link
A minor correction - Number of identifiers for extended frame is 2 to the power 29. The video says 2 to the power 21. 8:52 of the video.
Sorry may be careless error. Thanks for correction..
In standard can they are using 2 to the power 9 instead of 2 to the power 11 for message I'd. Same way they are using 2 to the power 27 instead of 2 to the power 29 for extended can.
Thank you so much sir..that really helped me a lot.
Please share AUTOSAR tutorials IN DETAIL
Yes..
Actually can works on 3 layers physical layer ,data link layerand application late too. While flashing we use application right so
Can you plz suggest any app this related write test case's
Can you please share the another tutorial I.e expert level link to me.
Thanks for such a help Sir
Thanks so much bro ✨
Thank you for this, sir.
I checked CAN HIGH & CAN Low are 3.5 & 1.5V for transmitting dominant bit & not 3.75,1.75 volts as you mentioned. Please check once
I mentioned it’s 3.75 and 1.25v
This is correct Please recheck once it’s not 3.5 and 1.5..
No he is correct it's 3.5 and 1.5 v only for transmitting dominant bit and recessive 2.5
I meant the minimum and maximum
Superb class
why specifically 120 ohm resistor is used at the CAN termination?? From where this magic no. "120" comes?
Its as per Maximum power transfer theory !! Will make one video on that same
Can u share this pdf
Whatts app group not available in description 😒
chat.whatsapp.com/CHDmNk3ghhN3JDm5ygwA9K
@@EmbeddedWorldAutomotive this group is full sir.
@@shradhasharma2690hii are you working in embedded domain
Why Because of Data Link Layer and Physical layer why Not others why because of 120 Ohms resistor we are using
Physical Resistors can be compatible to Physical layer only
Why because of only 120 Ohms resistors placing end
@@kishorekumar5204 due to the length of the bus which is supposed to be below 40 meters
Any one Institute in hyd.... CAN PROTOCOL
Am not sure !! But we have online courses.. for details pls WhatsApp +91 8197646612
good
Please explain the meaning of the question and answer instead of reading the presentation.
Error detection is not properly explained
Sure mam..will explain things properly
Nice 😕
Good
Is there any course for CAPL like recorded videos
Yes
@@EmbeddedWorldAutomotive can you pls provide what are the topics ur covering in CAPL
Upload automotive wire harness information video
Sorry for telling I thought 37th and 50 question answer are not proper answer getting
Please don’t be sorry, ur comments are always welcome..let us check it and update the same
Thanks for the specific points..it’s really appreciated
For and gate dominant is 1
Check again
please anyone to share the whatsapp group link