I believe the layouts of these next generation transceivers are all similar just as the older transceivers all had similar layouts. Looks good Screwdriver. ✌️
According to the Signal vs Power relationship, the increase in transmission power generally has little impact on communicating stations and causes unnecessary stress on components.
Not sure what you did there but those normally have almost no harmonics, so that 2nd you showed is not normal. That changed capacitor could be the problem. Also, IH and IL are not the correct menus for SSB. Be careful in there!
I will check your concerns on the next unit I do. Same cap on many similar chassis don't cause this. I didn't "invent" the cap mod it was in a Factory published update for a similar model.
@@BellsCB all good. Have a look at the BL an BH settings for SSB. Also be very careful around some items like the S Meter settings. Users without test equipment will not be able to restore the correct values without test equipment if they accidentally change them. I hope that helps.
I believe the layouts of these next generation transceivers are all similar just as the older transceivers all had similar layouts.
Looks good Screwdriver. ✌️
Thanks for sharing🎉
Thankyou very much.
your video is helpful to me🎉
Glad it helped 𝓢𝓬𝓻𝓮𝔀𝓭𝓻𝓲𝓿𝓮𝓻
Thank you
AWESOME!!!🌍💯
Thank You ; )
Thanks subscribed
Thanks for the sub!
Good job bud thanks❤❤❤
I really like these radios.
Would like to order online. Are you still taking online orders? And is the website up to date on stocked items?
Yes we are and web is up to date.
www.bellscb.com/products/tenmeter/anytone/Anytone_Ares_II.htm
Hi. how can I change this radio from HF mode to CB mode
I knew your name and this is the radio i am going to get in about a month. i have a old school TRC -457
How's the over the air audio ? How does the echo sound ?
What does replacing the capacitor to a 68 puf. Do please
increase peak power 6-10w
According to the Signal vs Power relationship, the increase in transmission power generally has little impact on communicating stations and causes unnecessary stress on components.
Not sure what you did there but those normally have almost no harmonics, so that 2nd you showed is not normal. That changed capacitor could be the problem. Also, IH and IL are not the correct menus for SSB. Be careful in there!
I will check your concerns on the next unit I do. Same cap on many similar chassis don't cause this. I didn't "invent" the cap mod it was in a Factory published update for a similar model.
@@BellsCB all good. Have a look at the BL an BH settings for SSB. Also be very careful around some items like the S Meter settings. Users without test equipment will not be able to restore the correct values without test equipment if they accidentally change them. I hope that helps.
Checked the spectrum on a new unit and it was the same, the cap change did nothing on the spectrum. 10-4 on the other settings BL and BH for SSB
Pain in the butt radio but you do get that classic look.
Can you add an RFX75 ?
Yes but it would be too small an increase to be worth it.
@BellsCB what are your thoughts about this radio over all? Are you able to get these talking good enough to be a nice truck radio?
Frankly no, not a truck drivers type radio....wont be LOUD like a AM CB guy is looking for.
Oh, by the way, whose monster hands are in the way? 😂🤣😂🤣
thats a nice radio. :) where did u get urs?
www.bellscb.com/products/tenmeter/anytone/Anytone_Ares_II.htm
Does Bells CB offer the Anytone Ares II stock microphone for sale? I'm looking for a spare.
Sorry, not yet.
@@BellsCB Ok! Thanks for reply back.
Worse radio I ever bought
It made a better shotgun target than any else