Getting Started with Programming PIC 12F675

PIC12F675 is 8bit cheapest PIC IC with 6 GPIO pins, 4 channel 10 BIT ADC, 2 Timers .It has got 1k words of ROM & 256 Bytes of RAM.
PICKIT3 is the tool used to program the chip.
IDE used is MPLAB X and compiler is XC8

[@advancedinkscape8494]

Quality video! The camerawork for showing the board is exceptionally clear! And the video showed each step, even the ones that are usually forgotten, so I'm glad I found this one.

[@anokhautomation4453]

It was a very very useful tutorial 👍 thanks for your detailed demonstration 👌
Keep posting more tutorials with pic microcontroller 🙏

[@admdni3460]

This video had everything that i needed!Exelent work!

[@markday3145]

In the beginning, the narration was not synchronized with what was happening on screen. The captions helped, but would have been even more useful if they were displayed a little longer. Thanks for the quick introduction.

[@hygienica1246]

Miss old days when burning gpio was made by db9 and five wires.

[@rotorcraft68]

Very clear and concise for beginners! Thanks!!

[@josephtannenbaum8696]

Well, first try, it went fine. Had a bunch of packs to u[pate, now it doesn't recognize TRISIO or GP4. The updates broke it. Using MPLABX 5.50.
EDIT: Finally got it to compile by putting the include files in the project folder. Apparently with the path specified, it still cannot find them. Looks like MPLABX 6.0 has the same issue from some of the posts I saw.

[@patrickjoseph9476]

Sir, excellent video. Can you make more videos on programming this IC along with ADC, comparator and UART communication?

[@dhanuskalankathilaka]

💯🙏

[@oocanto]

Excellent tutorial! Thank you very much!

[@wesselvanaswegen3340]

Is it possible to lower the operating frequency to reduce power consumption ?

[@brucelamb6060]

Thank you for the video. I'm new but is there a way to detach the pic3 device and set the machine code on the pic12 mocroprocessor itself. I'm thinking in terms of deploying producting and deploying a product, and not wanting to buy a pic3 programmer for every board that gets manufactured. Thanks again.

[@kryptocat4240]

Sir make a video on programming ATMEGA32 and ATMEGA 16

[@nasarpes]

PICKit 3 in tools is disabled for me, I think it doesn't support now.

[@michaelboss7968]

you have a deep voice and your pronunciation is not bad, all these other kids, sound like a bunch of girls with their high voices, can't understand thing they're saying half of the time, anyways thanks

[@dand5102]

Excellent video!

[@SumanNath25]

Where to get this chip? Local electronics store seems not heard of this one.

[@nandum6847]

Sir what is compiler tool chain version. When i try to edit configuration bits. I cant.. Its showing vompiler tool chain version not set. How to solve it.. Plz help

[@advpareshmhatre]

Output is working fine,
But digital input is not working
Why?
I tried so many time,
One more thing to mention i have used universal programmer, i also disable analog and comparator mode. But nothing happened.

[@bappagoswami534]

I am trying to program with mplab 8.91 and assembly language

[@nilaventhiranvespanathan5637]

im getting errors like this
"The programmer could not be started: null
"
i tried plug off and plug in back but its keep showing the same error .

[@electronic7979]

Helpful video 👍

[@jaishetty8586]

Thank you.

[@Haikoloji]

thank's you so much 🤗

[@shafeequesm4139]

Sir how to read hexcode from pic ic

[@sandysandilya3852]

Excellent explanation sir!!! and, can I use an "8051 USB Programmer TOP8051" to program a "28C256 EEPROM"? Please clarify....

[@patrickjoseph9476]

As far is I know, according to Ben Eaters videos, you need a special programmer to do that job for you.

[@patrickjoseph9476]

BTW, why go for parallel I/0 EEPROM when you have serial interface eeproms like AT24C14?

[@mohamedsaadabdo9272]

Great ! , can u explain Sleep mode with pic12f675 micro controller in next video ?

[@Sanaullahalam95]

You are great dear respected sir
Please make pic12f683 based 10bit pwn led dimmer with 10k hertz pwm frequency

[@BG-gr1uu]

Hi Sir, can you help me to generate c code for sine wave inverter.

[@BG-gr1uu]

Can you share your contact

[@LeoH3L1]

Thank you very much, a lot of the other videos out there are shall we say.... less than useful, causing more problems than they solve.
Yours didn't do that, again thanks :)

[@gokulraj1031]

Sir i have really confused ,which is best compiler for avr (codevision avr or win avr).

[@pavanjm17]

What is the difference between this pic12f and attiny 85

[@srinuvas2826]

Thankyou Sir,. I have to buy

[@SukantKumarSahoo869]

PLEASE HELP:
Sir, I could able to do this blinking program on PIC12F675. But the problem I am facing is when __delay(1000) function is called multiple times to create more delay, __delay(1000) is not giving 1 sec. delay i.e. when __delay(1000) is called 60 times (via for loop) to create 1 minutes delay, it's giving 45-50 sec. delay.
Please guide me where is the problem???

[@anokhautomation4453]

__delay_ms(1000); //use this format

[@SukantKumarSahoo869]

@@anokhautomation4453 I am using __delay_ms(1000); format only. Otherwise __delay(1000); function will give error.

[@anokhautomation4453]

Check the clock frequency is set correctly in project and proteus .
anokhautomation.blogspot.com/2022/05/led-blinking-project-with-pic-18f45k22.html

[@najjumol]

wery good expert

[@AsifAhmed-so5hl]

Please help me sir analog input and digital output input reference 3.2 volt and output 2 other pin please help me sir pic16f676

[@saivadhan4509]

Sir you can create courses on UDEMY!

[@les2833]

Is this the same as PIC12F1612?

[@GurpreetKaur-qr3dk]

Sir please MCLR 4 switch use coding

[@user-hc3cf6rx2p]

The pickit it's onlye for microsheep microcontroller?

[@ronen124]

yes

[@forthidiot4297]

Tl866a programs it's universal programmer

[@ronen124]

@@forthidiot4297 can u please provide a link that shows how you program with it Atmel uC's?

[@powertronicsaudios]

YOURE NUMBER SIR