Llevo mas de 2 años usando este programa y finalmente me encuentro con un tutorial que vale totalmente la pena para poder explotar corona como se debe, muchas gracias maestro.
Totalmente de acuerdo! Primer tutorial que encuentro, donde se explica como debe ser un workflow de trabajo correcto, y lo mejor es que se pueda entender!
Amazing tutorial! I watched this this morning and today produced one of the most realistic renders I've ever done, and I've been around since V-ray 1.5 😄.... really great workflow...being able to balance lighting post-render is amazing! Thanks
Hello, thank you so much for your all explanation. This is really a clear and quality video about lightmixer. I will watch your other videos, I am pretty sure they are super helpful!
You made fantastic tutorial...because every one can easily understand the process and output...thank you so much...kindly make more tutorials like fog effects , dof and motion blur too...
Holy crap! Using lightmix to adjust sun and GI intensity is whey faster than I used to do by adjusting it on its parameters while interactive rendering would be actualizing it!!!!
One thing to take into account: Real-world values. You adjusted the sun's intensity in order to reduce overexposure even though in reality, that isn't possible. A photographer can only change the ISO on his camera to reduce it. Your workflow may work, but lowering the exposure on the camera would be a more realistic result. Also, I calculated the speed of your car that is driving through the street. You animated it for 10 frames and the 3ds frame rate is set to 30 fps by default. The car traveled roughly 8 meters I would say which makes it drive 24 meters/second or 86 km/h which is way too fast in your scenario. Maybe adjust those values to real-world values as well in order to achieve a more believable result.
You are entirely right. but the good thing about what we are doing is that we are not restricted by these laws. you can use the camera settings, or light intensities, or any other workflow that you want to follow. But I agree with what you said.
Great video, very educative and straight to the point. Will be so happy if you can give us something similar for an interior space, from the camera to the final render.
Thank you very much for the tutorial! helped a lot. Ill hit the bell icon for your promise at 7:25 . Looking forward for your video about effects like motion blur and DOF :)
Really great tutorials on your channel. They help me a lot to achieve more realism in my renderings. It would be great if you would consider to make a tutorial about imperfections in texturing and maybe how to create UV maps (unwrapping) and to work with them. Looking forward to your upcoming Videos :-)
@@HMSTUDIO2020 yeah, i started doing reels of my work ( offline client's work ) and started selling my services on fiverr. www.fiverr.com/yashmevada my Instagram : instagram.com/mar_enders/
Incredible tutorial!! I've been looking for this type of tutorials for a long time, and the truth is that all your videos are amazing, I'm sure we would all like to continue seeing more, I hope you continue uploading. Also ask you where you learned to use the crown and if you have courses to take, thank you very much for the contribution! greetings from Argentina!!
Can you make a video on how to create materials, from taking raw pictures, making them seamless, maybe applying a pattern and creating a material in vray. Especially creating fabric materials for furniture, beds, curtains that let through light
Wow Amazing tutorial would love to see motion blur settings thanks so much can you do videos on texturing like seamless and all different textures that i cant buy online
thank you for this great video, that was so helpful. I have a question, why my skey isn't blue at the beginning and when I finish the all the step it causes the problem for final render! I checked ll the setting and they were same i couldn't understand where is my mistake that the sky is so bright
It could be because of the sun light's direction. If you have a backlit situation in your render, you would most likely have a brighter or even white sky. If that's not the case, the problem could be with your exposure settings, either in the camera of the frame buffer. Last but not least, make sure that you have a skylight in the environment not a simple color.
tnx for greart tutorial....is it ok to put SETUP LIGHT MIX (in render setup)after we fix our lights with lightselect ELEMENTS? or we shouldnt click on setuplight mix ??Will this ruin our work?(our light select elements..)
i m learning exterior lighting and everything can u make one video for motion bloor car.. u using in this seen with red effect in render ? it was so helpfull for me ..
Very useful tutorial ☺️ Good and non-destructive methods for lightning 👏🏼 I have one question about surrounding buildings? Is it just planes, with opacity and diffuse maps or actually models of buidlings? Thank you in advance!
i did the same thing but results are still bad, i think i need to learn how to apply material on exterior, can u make a detailed video like this on material for exterior
A very useful tutorial this make my render more realistic and have so much idea on lighting. I got some problem during the final render It only render in interactive rendering but when i try to do final render it only shows me the sky without the model. Please sir help..
I'm glad it helped. Honestly I have never faced that problem and since it shows everything in the IPR, it mush show everything in the final render as well. Obviously I don't have access to your file to figure out what is the problem, but I'd suggest to merge your scene into a new file and try again... I hope it helps.
Thank you for share this tutorial, but i have a question, why do you put into slot a correct material ? i mean, which is the result to do it ? other thing, how i can see the textures applied in the objects ? because with the firts option chequed scene/mtl override/none, all looks at the same color, even with textures applied, thank you if you can response me
Llevo mas de 2 años usando este programa y finalmente me encuentro con un tutorial que vale totalmente la pena para poder explotar corona como se debe, muchas gracias maestro.
Totalmente de acuerdo! Primer tutorial que encuentro, donde se explica como debe ser un workflow de trabajo correcto, y lo mejor es que se pueda entender!
You make it so easy to understand! Your workflow is magic! Thanks so much!
Thanks for the tutorials , hope to see more especially Corona
Amazing tutorial! I watched this this morning and today produced one of the most realistic renders I've ever done, and I've been around since V-ray 1.5 😄.... really great workflow...being able to balance lighting post-render is amazing! Thanks
It's really nice to hear that. I know it's a late reply, but I appreciate your comment. Thank you.
Such a good tutorial, easy to follow and everything is explained so well.
the best tips i ever see in a free tutorial man, thank you very much.
the best ilumination tutorial!!!Thanks!!!!
This channel deserve more subscribers. Thank you for the tutorials Sir! 😊
🙏🙏
This channel deserve more subscribers. Thank you
the most helpful tutorial i ve never seen..... thank you very much
wowww nice thaks u for tutorial
i hope see more tutorial for corona render 3ds max
Thanks! Looking forwards to watching more tutorials
What a great tutorial
Thank you
Will try your workflow today
Hopefully getting realistic results 👍🏼
Hello, thank you so much for your all explanation. This is really a clear and quality video about lightmixer. I will watch your other videos, I am pretty sure they are super helpful!
Glad you liked it
I literally just walked by this building here in Buenos Aires. Crazy to see it in real life and then just have it pop up in my recommendations 😂
That is so weird and random :)). Thanks for sharing that with us.
You made fantastic tutorial...because every one can easily understand the process and output...thank you so much...kindly make more tutorials like fog effects , dof and motion blur too...
Thanks, thanks, thanks!!! Best tutorial of youtube Exterior Render. Congratulation 🙏🏼. More tutorial👏🏼👏🏼👏🏼
More to come!
Yesssssssss!!! 🤩🤩
Holy crap! Using lightmix to adjust sun and GI intensity is whey faster than I used to do by adjusting it on its parameters while interactive rendering would be actualizing it!!!!
Your Tutorials and explainations are great and excelent.
Thanks
Excellent Tutorial, Thanks, and congrats.
Awesome tutorial! Thanx
Thanks for this helpfull tutorial. very nice and powerfull tutorial.
Nice tutorial!! So helpful. Thanks for that!
Bro You are awesome and great, thanks for the useful video, keep growing, i am just now subscribed your channel.
You are very helpful! Excellent work!
Excelent tutorial my friend..thank you.
One thing to take into account: Real-world values. You adjusted the sun's intensity in order to reduce overexposure even though in reality, that isn't possible. A photographer can only change the ISO on his camera to reduce it. Your workflow may work, but lowering the exposure on the camera would be a more realistic result. Also, I calculated the speed of your car that is driving through the street. You animated it for 10 frames and the 3ds frame rate is set to 30 fps by default. The car traveled roughly 8 meters I would say which makes it drive 24 meters/second or 86 km/h which is way too fast in your scenario. Maybe adjust those values to real-world values as well in order to achieve a more believable result.
You are entirely right. but the good thing about what we are doing is that we are not restricted by these laws. you can use the camera settings, or light intensities, or any other workflow that you want to follow. But I agree with what you said.
very helpful tutorial. thank you so much!
A very great and precise tutorial, thanks for this! would be great if you could make tutorial over other settings like animation, focus values etc
Thank you for a clear and great tutorial sir
Nice tutorial! Hope to see more!
I simply saw the topic and subbed!
Thank you
Waouh, just Fantastic 😍😍😍👏👏👏👏
Great video, very educative and straight to the point. Will be so happy if you can give us something similar for an interior space, from the camera to the final render.
Thank you. I already have a video about interior lighting on my channel, but I'm thinking about a full workshop to cover everything also
Nice work dude....some new bits in there
Thank you very much for great tutorials! They are helping me out a lot!
🙏🙏🙏🙏
Nice tutorial!! Hope will learn more about the motion blur soon!!
Thank you very much for the tutorial! helped a lot.
Ill hit the bell icon for your promise at 7:25 . Looking forward for your video about effects like motion blur and DOF :)
i love you man, thanks...
Really great tutorials on your channel. They help me a lot to achieve more realism in my renderings. It would be great if you would consider to make a tutorial about imperfections in texturing and maybe how to create UV maps (unwrapping) and to work with them. Looking forward to your upcoming Videos :-)
Sure thing! thank you
Well presented, go on HaDy!
Thank you 🙏
amazing bro , Good job keep it up
Thanks 🔥
thanks man! love it, really helpfull
how do you get clients, can make video on that how to get clients.
@@RENDERWITH just try to be active on social media and clients will find you eventually
@@HMSTUDIO2020 yeah, i started doing reels of my work ( offline client's work ) and started selling my services on fiverr. www.fiverr.com/yashmevada
my Instagram : instagram.com/mar_enders/
Thanks! Looking forwards to watching more tutorials on Corona render interior and postproduction (realistic render) (;
Perfect! It helped me a lot!
Glad it helped!
"God bless you. Thank you so much!
this is so helpfull.. thanks
Very nice rendering
Incredible tutorial!! I've been looking for this type of tutorials for a long time, and the truth is that all your videos are amazing, I'm sure we would all like to continue seeing more, I hope you continue uploading. Also ask you where you learned to use the crown and if you have courses to take, thank you very much for the contribution! greetings from Argentina!!
great Guide
Thanks so much for this tutorial. :)
great work , your channel is so helpful and i wish next time you upload the 3d model so we can practice on it , good luck
That is very very helpful,
Great Job
Hello..thank you so much for the tutorial..maybe if u could share the same model on your tutorial..that would be a great help. thank you so much
Thank you .. appreciate your effort
Really impressive tutorial....you should also make one on creating materials...v nice work :)
Bro!! Thank you so much.
Excellent !! Thank you very much
You're welcome 🙏😉
Thank you! Good job.
good tutorial, thank yoy!
You’re most welcome
Fantastic
great tutorials
Ur last all videos on corona render helped me a lot
Change my overall 3d veiws
Can u make video on corona animation
Its a request
Thank you sir. Love you...
All the best
nice thanks u for tutorial
perfect!
Nice job Bro
it's a great video, well done. I want to ask something. How did you create the moving car image in 3dmax?
Thank you. There’s another video on the channel about the motion blur. You can find it in the main page of the channel.
@@HMSTUDIO2020 thank you 🙏
AMAZING!!!!
Can you make a video on how to create materials, from taking raw pictures, making them seamless, maybe applying a pattern and creating a material in vray. Especially creating fabric materials for furniture, beds, curtains that let through light
Thanks alot ❤
Wow Amazing tutorial
would love to see motion blur settings
thanks so much
can you do videos on texturing like seamless and all different textures that i cant buy online
Wow, thanks
thank you for this great video, that was so helpful. I have a question, why my skey isn't blue at the beginning and when I finish the all the step it causes the problem for final render! I checked ll the setting and they were same i couldn't understand where is my mistake that the sky is so bright
It could be because of the sun light's direction. If you have a backlit situation in your render, you would most likely have a brighter or even white sky. If that's not the case, the problem could be with your exposure settings, either in the camera of the frame buffer. Last but not least, make sure that you have a skylight in the environment not a simple color.
Amazing tks ❤🧡
Thank you sir,
If can make one video on overview(brird eyeview) then please make it.
tnx for greart tutorial....is it ok to put SETUP LIGHT MIX (in render setup)after we fix our lights with lightselect ELEMENTS? or we shouldnt click on setuplight mix ??Will this ruin our work?(our light select elements..)
Thanks so much
i m learning exterior lighting and everything can u make one video for motion bloor car.. u using in this seen with red effect in render ? it was so helpfull for me ..
I already have a video about that. You can find it on the main page of the channel.
There is a slight doubt as to which of the render settings path Training UHD Catch should give an exterior scene..?
HADI BEY very good
Nice video
hi HM STUDIO great tutorial. did you do anything for the GAMMA?
Very useful tutorial ☺️ Good and non-destructive methods for lightning 👏🏼 I have one question about surrounding buildings? Is it just planes, with opacity and diffuse maps or actually models of buidlings? Thank you in advance!
thanks!
Great tutorial and can you share road texture??😁
amazing bro
Thanks 🔥
Is there any guide/Rules/Course/tutorial on how to do exterior massing/facade design. full comprehensive course.
Thank you
i did the same thing but results are still bad, i think i need to learn how to apply material on exterior, can u make a detailed video like this on material for exterior
Cool! Thanks for it! Its possibile use this way with vray 5 and lightmix? Thanks :)
thanks, be sure next time to use 16 bit image using in photoshop, because u got more light information
Sir plz make complete video of vray 5 Uvw randomizer & tri-planer texture
Thanks for the idea
Hey, which CPU you use and how many min. You needed for this image to render?
please make video about camera setting
It will be my next one ;)
A very useful tutorial this make my render more realistic and have so much idea on lighting.
I got some problem during the final render It only render in interactive rendering but when i try to do final render it only shows me the sky without the model. Please sir help..
I'm glad it helped. Honestly I have never faced that problem and since it shows everything in the IPR, it mush show everything in the final render as well. Obviously I don't have access to your file to figure out what is the problem, but I'd suggest to merge your scene into a new file and try again... I hope it helps.
@@HMSTUDIO2020 it's works, Thanks alot. Please we need video on depth of field and blur motion
@@sadeeqmusa72 I have that on my list. It will probably be released this month. I’m glad your file is fixed btw.
@@HMSTUDIO2020 okay. Thank you alot.
Thank you for share this tutorial, but i have a question, why do you put into slot a correct material ? i mean, which is the result to do it ? other thing, how i can see the textures applied in the objects ? because with the firts option chequed scene/mtl override/none, all looks at the same color, even with textures applied, thank you if you can response me
Really Coll Did you tell me about Car Effect
Yes I did, but briefly
@@HMSTUDIO2020 thank you we are waiting sir
Good ^ ^