Mitsubishi Colt 1.1i - Exhaust Center Pipe Swap (HD)

Поділитися
Вставка
  • Опубліковано 16 вер 2024
  • The exhaust center pipe rusted off behind the catalyseur while 150 km away from home. Fixed it the wrong way, so the second lambda was damaged. Anyway, the MIL lamp didn't showed any error. So the center exh. part needed to be changed and that's what's this video is all about. The main problem was to make it seal again...
    Tools
    - flat screw driver
    - 24 mm wrench
    - big pliers with extender
    - normal pliers
    - wire brush
    - angle grinder with 1 mm wide disc
    - gloves
    - protective eye-glases
    Material
    - new exhaust center pipe
    - biggger 52 mm clamps - 3 pcs
    - steel passivating liquid
    - base anti rust coat spray
    - black cover spray
    - wd40 or something similar
    - glas fiber rope
    - a piece of metal sheet
    - zip tie
    Another Usefull Videos:
    MITSUBISHI COLT 2005
    - Quick Pollen Filter Change: • Mitsubishi Colt 1.1i -...
    - Oil and Filter Change: • Mitsubishi Colt 1.1i E...
    - Water Pump Replacement: • Mitsubishi Colt 1.1i W...
    - Alternator Replacement: • Mitsubishi Colt 1.1i -...
    - Rear Shock Absorbers Change: • Mitsubishi Colt 1.1i -...
    - Headlight Change: • Mitsubishi Colt 1.1i H...
    - Air Filter Change: • Mitsubishi Colt 1.1i A...
    - Spark Plugs Change: • Mitsubishi Colt 1.1i S...
    - Pollen Filter Change: • Mitsubishi Colt 1.1i -...
    BMW E39 2003
    - Rear Doors Blocked Inside and Outside - Accessing Door Lock: • BMW e39 - Rear Right D...
    - Flywheel and Clutch Replacement: • BMW e39 - Dual to Sing...
    - Wiper Arm Fail and Repair: • BMW e39 - Windshield W...
    - Front Brake Disc Replacement: • BMW e39 - Front Brake ...
    - Engine Oil Change: • BMW e39 520d - Engine ...
    - Air filter Change: • BMW e39 520d - Air Fil...
    JAWA 350/639
    - Original Dashboard Assembly: • Jawa 350/639 - Origina...
    - Carburettor Fuel Height Reset: • Mitsubishi Colt 1.1i -...
    - Engine Assembling Part 1 : • Jawa 350/639 engine mo...
    - Engine Assembling Part 2 : • Jawa 350/639 final eng...
    - Speedometer Gauge Repair: • Jawa 350/639 - Speedom...
    HYUNDAI i20 2019
    - Gearbox Swap: • Hyundai i20 1.2i - Gea...
    - Gearbox Sealing Ring Swap: • Hyundai i20 - Gearbox ...
    - Skid Plate Repair: • Plastic Skid Plate Rep...

КОМЕНТАРІ • 24

  • @thatondra
    @thatondra Рік тому +1

    Dělal jsem podobnou věc tento týden na 1.3. Měl jsem děravý koncák, tak že vyměním jen ten. Při sundávání odpadl kus středového tlumiče, který byl zasunutá v koncáku. Takže jsem koupil i střed. Ten jsem pak od katu raději uřezal, zbylý kus trubky na katu jsem říznul podélně, rozevřel plochým šroubovákem a šlo to dolů. Konec katu jsem lehce obrousil, odmastil, napatlal těsnící pastou na výfuk, střed odmastil, napatlal a namontovaný střed pak stáhnul sponou. Koncák to samé... Pasty jsem dal raději víc, ale byl jsem mile překvapen jak dobře to fungovalo.

    • @REBUILDLab
      @REBUILDLab  Рік тому

      No ja som to s tou pastou raz skusal, ale mi ju nejak vyfuklo von na jednom mieste, tak som to uz ani neskusal v tomto pripade. Jo ale diky za info, uzitocne Ondřej.

  • @DerGeistDesKriegers
    @DerGeistDesKriegers Місяць тому +1

    6:43 all I understood was *kurwa* and that explained enough :) Those clamps probably would last a thousand years...

    • @REBUILDLab
      @REBUILDLab  Місяць тому

      Yes it was a pain and it still is! 😁

  • @huseyintiskaya4583
    @huseyintiskaya4583 Місяць тому

    thank you verimach

  • @HK-dj1dp
    @HK-dj1dp Рік тому

    Das Video war interessant, und hat mir geholfen mich vorzubereiten.
    Ich empfehle wenn man keine Hebebühne hat , den Mitteltopf komplett mit Lambdasonde auszubauen. Dann kann die Lambdasonde besser ausgebaut werden.
    Und ja , Kupfer Paste ist sehr wichtig ! Auch die Mutter (Gewinde) damit schmieren.
    Sowie ein Auspuffkitt dann wird kein weiteres Zubehör benötigt .So wie bei deinem Video.
    Mache weiter so ,vielen Dank!

    • @REBUILDLab
      @REBUILDLab  Рік тому

      Danke sehr für Dein Tipp! Bin froh, dass es geholfen hat!

  • @TBluberry
    @TBluberry 6 місяців тому +1

    Have the exact same issue .. just got the exhaust from the seller🎉

    • @REBUILDLab
      @REBUILDLab  6 місяців тому

      It lasted a year or two, still having problems with it, because the catalytic converter pipe did rusted away :D good luck with your pipe!

  • @vali7397
    @vali7397 Рік тому +1

    I used an empty beer can and some exhaust seal paste. Works fine .

  • @lukaskolumpek2237
    @lukaskolumpek2237 11 місяців тому

    Přesně takhle hezky mi to upadlo :-D Naštěstí na parkovišti u obchoďáku, takže to vázací drát, hliníková páska a trocha kreativity na dojezd pojistily.

    • @REBUILDLab
      @REBUILDLab  11 місяців тому

      No ved aj mne tak, akurat 100 km ci kolko od domu a provizorna oprava paskou zlyhala po 2 km 😄

  • @thebeaver5835
    @thebeaver5835 Рік тому +1

    Very good job with the exhaust fix
    One question
    I have the same car what oil do you use?

    • @REBUILDLab
      @REBUILDLab  Рік тому +2

      Thanks. I use 5W40 full synthetic.

  • @JuanCar89
    @JuanCar89 Рік тому +1

    👏🏻👏🏻👏🏻

  • @michaelfraser5723
    @michaelfraser5723 3 місяці тому +1

    disconnect oxy sensor and remove it on the bench

    • @REBUILDLab
      @REBUILDLab  3 місяці тому

      Yeah, next time I'll do, thnx

  • @yannkitson116
    @yannkitson116 2 роки тому

    Good job 👍

    • @REBUILDLab
      @REBUILDLab  2 роки тому

      Thank you very much Yann 👍

  • @klemson84--92
    @klemson84--92 2 роки тому +1

    👍