Anchor Bumper アンカー【ミニ四駆】Tamiya Mini 4WD #79
Вставка
- Опубліковано 29 сер 2024
- One of the most popular bumper around these days!
Salah satu bumper paling populer akhir-akhir ini!
Follow me on Instagram: ...
Like Roscoe Channel Facebook Page: / roscoechannel
#anchor #アンカー #roscoechannel #mini4wd
already do the AT n Anchor bumper..the result is awesome..tq roscoe make this video n sharing to all tamiyarians..
Glad to hear that 👌
Ketemu juga tutorial yg saya lagi cari,, thank bang uraian detail nya
Next video should be some slow mo real testing on track! Thanks for sharing the guide~
😭 too bad I don't have a proper recording device. Can't make any decent slo-mo video 😭
とても参考になりました。
It was very helpful.
私は本当にうれしいよ。あなたの仲間にこのビデオを共有してください。私のビデオを見てくれてありがとう。
Hi, love your videos!!!! I speak English and it’s great you use subs so I can follow along when it’s needed. Do/would you build & sell bumper sets ?? 😝
Glad to hear that. Unfortunately no, I don't sell anything.
Japanese always make awesome stuffs with simple materials
It is new bumper! GOOD!
Yes! Thank you!
アンカーで行き詰まったら、まず海外のプロレーサーから学べ!!
これなら私にもできるぞ!
may the force be with you…!
見てくれてありがとう。
Rosco thanks for the shared knowledge! I was wondering if you can still install a break pad in that set up? Whats the clearance from the end to the ground? It seems kinda low
Yes you can. I'm using a 24mm tires and I have around 4mm clearance on the rear side because I put the brake plate on top of the Anchor base. Good question bro. 👌
Ahh ok tnx bro
Mantapp sukses terus buat channelnya, semangat ya bikin video2 nya
Thx gan!
want to know what it does? skip to 9:40
Finally! Thanks Roscoe!
Yes sir! Enjoy!
mantapp bang.. langsung praktrkin sudah..hhheee
What do you to obtain the fluid sliding damper motion? Do you have to widen the hole in the catcher?
The bowl shape of the Anchor plate need to be really smooth. Put some hard grease on the bowl shaped plate
Cool!! Wanna learn this so badly!!
Good luck bro! Just follow the tutorial! 😁
What do you think with 4 pairs of rollers, instead of 3? What are the pros and cons? For ms chassis speedtech
More stable for sure. But more contact point, maybe slightly less speed (in theory). But 8 rollers is needed in high speed. Proven to be very useful.
Newbie question: Is this applicable for other chassis like Super II or AR? are the rear mounting holes the same?
Applicable but it requires a different installation method. U need to make 4 point stopper.
Thanks bro!!
jadi pingin tamiya...
Thank u sir
Hey roscoe is that good even the racetrack layout dont have a rocking straight?
Of course
which is better FL system or anchor system??
I prefer anchor
@@roscoechannel why?? whats the advantage and disadvantage between FL and anchor system??
Rangga has my S2 with front and rear anchor stay....so no idea how well mine will work until he tries it out :)
Same mechanism with this one?
pretty much, maybe just a little different on trimming and used an 11mm bowl roller instead of the stabiliser head.
imgur.com/a/vS3gume
Goodjob with your s2 sir
The bowl roller cannot replace the stabilizer head. There's a reason of using a "soft" stabilizer head in the anchor system.. If u know what I mean 😊
I've seen the run in Rangga's channel. It's kinda unstable bro. Need to do something in terms of stability.
I know, I know, I need to step up my building skills a bit, I'm getting there, but I'm just having so much fun making silly things :p
Whats the size of the screw for the rear rollers? Is it a cap screw?thanks
I think I've mentioned it in the video
@roscoe, does the anchor bumper help in digi curves and rocking straights?
Yes
Can i use 15497 HG Carbon Reinforcing Plate for 13/19mm Roller (1.5mm) instead of HG Front stay Fully cowled?
Yes you can. Any plate can be used to replace the fully cowled if you know how to make it.
Thanks!
Hi im a newbie in tamiya. I really like x chasis. May i request if you can teach us how to setup an x chasis. Hope you grant my request.
I never use Super X chassis for modified class. I used it once when I was playing at the box stock category. So I don't have any knowledge to help you on this.
Sir do you have a video how to mount anchor system on MA? Thanks
Unfortunately no. The system is similar, but the mounting point will be different
Can I use the same method and plates with MA chassis (trimmed like Dolores)?
Installation method will be different. U need to make 4 point stopper also.
Can use MA chassis?
Yes
Good day sir what roller size did you use at your anchor bumper and what type of screw tnx sir
19mm with cap screw
Tnx sir
I'm having a hard time finding that "mushroom" part thing. Could there be another alternative for that item?
As far as I know, there's no replacement for that mushroom.
Errrr, is that the mushroom part included in ar/ma/fma basic tuneup set?
I guess so
I have both AR and MA, that thing doesn't exist in my kits. lol :D
@@iandcNZ oh I'm sorry. I kinda didn't know that they didn't included on them. Anyway, do you checked the separate GUP parts? I mean the green ones....
Bos bs buat konten build sto pke super 2 chasis hk
Udh ada
Finally!
Share it! 🎵🎶
My ball cap wont work on the frp. Still figuring out what when wrong.
U can't use a ball cap. U need to use that mushroom
@@roscoechannel yeah. Im using that mushroom thingy. Yellow one.
Which do you prefer, anchor of FL? And why?
Anchor! Coz it's more good looking! 👍
Roscoe Channel but when it comes to perfomance based on your testing? Good luck at graha btw.
I prefer Anchor. Mine was not perfect, still need some adjustment. But I didn't have time at the last race. That's why I switched to the sliding damper at the rear side. Brought me to the Final race. But CO at the 1st lap. 😭
Roscoe Channel ohh its already finished. Nice run still. Whats the issue with the anchor?
Roscoe Channel one more thing. Maybe you know about this, i remover the protector of ao620 and i noticed that the inside is different from the ao620 that came with the gear set. The one included in the gear set has metal between the balls while the one that came in the original package has orangy colored plastic.
And it is ok to use without a guard on the bottom
Need a guard bro, just like in the video
Thx videonya kak, tapi apa ini bisa selamet di lane changer biasa?
Udah pernah pake di lt.2 Graha. Lewat sih. Cuma ya tergantung layout awalannya juga. Kalo dikasih straight banyak, bisa aja gak lewat.
@@roscoechannel oh ok thx, kyk ic minggu kmaren lane changer high speed, pake sliding biasa aja mobil saya modar😫😥
nice!
Thank you! Please share it to your friends 😁
Anchor bumper vs FL System?
Much better to used?
Thanks Roscoe
Anchor
@@roscoechannel
Pros and Cos sir Roscoe?
It's too long to be explained. Some people still prefer FL to Anchor. Just based on presonal preferences. It's better for you to try them both yourself. That way you will gain more experience and can decide which one is better for you.
@@roscoechannel
Thanks a lot Roscoe 😊
You're welcome. I'll probably make a video about those two. 👌
Yeah english
Can be anchor bumper applied at ar chassis?
Yes. But, I think the mounting point is kinda different.
Anchor vs fl system enakan mana larinya om?
Maaf out of topic om :D
Santai gan
Can it be used on fm chassis?
Yes, but it will require a different installation method
Apa perbedaan part nomor 95253 dengan 95072, dari bentuknya sama, saya mau buat anchor takut salah
Yang carbon ya?
nunggu video test run nya 😋
Wahahahah. Sbelum tutorial udah dilariin kok 😁
+Roscoe Channel nunggu di post video nya kalo gitu wkwkwk 😝
Me too want test run of your AT bumper car with Anchor setup 😍
ua-cam.com/video/uYuMUZ46ick/v-deo.html
bahasa inggris nya mantab.
Makasih gan
Dipasang di MA chassis bisa ya om roscoe?
ua-cam.com/video/IuzLcBL6rRo/v-deo.html
New subscriber here !!!
Welcome! Enjoy my other videos too! Thank you
Met malam gan...ane dah mau lanjut bikin bumper depan n belakang n lg tengah ngumpulin bahan2nya. Depan mau coba pasang sliding damper tp msh kurang angled plate. Utk belakang mau aplikasi anchor system tp msh kesulitan mencari "underside stabilizing" dan jg mata bor utk bikin "bowl shape". Kl bole nanya gan nama mata2 bornya apa ya, sy agak kesulitan mencarinya. Thx gan...
Sy jg gatau namanya gan. 😅
@@roscoechannel Brsn kelar praktek. Blom sempurna, entah knp ga bs gerak sliding, rigid dia. Dah coba bongkar pasang bbrp x lom ketemu. Biar ngendap dl deh moga2 ketemu knp. Mau coba lnsg lanjut AT Bumper br liat potongan yg hrs dibuat berikut lobang2nya, lnsg putuskan utk pending dah capek badan hahaha.
Good day sir which is better anchor or that pivot?
Tnx
Front pivor and rear anchor 👍
Yup. I don't use that o ring anymore. 😁
Ah tnx ur a big help what is your latest design of anchor bumper do you have a video? Tnx bro
In pivot bumper, I've replaced it with something. You can watch it here: ua-cam.com/video/aPZ-4wut90E/v-deo.html
My anchor? It's not using a catcher anymore.
om untuk buat bulatak untuk jamur , harus sampai tembus jamus ke bawah om ? saya bikin gt kok gk bisa kuat pasang nya om haha pencerahan nya dong om
Iya. Sesuai tutorial aja gan
Per nya pakai yg hard biar lebih gigit, lalu kasih penyangga depan dan belakang dengan spacer, dan pemilihan frp yang sesuai supaya tidak goyang
Om,,cobak bikin STO pake broken G bisa gak kira",,pensaran aq
Bisa sih. Tapi kurang sreg sama chassis motor depan 😁
Coba dlu om
bang kalo anchor sytem di aplikasikan ke chassis super 2 work it gak ?
Bisa
@@roscoechannel Buat tutorialnya dong bang untuk super II
PANDA ENDUT Bisa. Tapi klo di Super 2 bedanya ga bisa langsung pasang. Harus bikin stopper di bagian depan anchornya. Atau kalo ga mau ribet bisa pake roller putih dari part #15313 utk jadi stopper depannya.
Sir any alternative to catcher
U can make anchor without catcher
@@roscoechannel thanks your my idol
Bang Roscoe mau nanya nih, kenapa harus pakai car catcher ya? Kalau diganti bahan lain gimana?
(Maap ketik pake auto correct jadi kacau)
Bisa tanpa catcher
アンカーか、僕ももう一回作ってみようかな♪♪(日本語で毎回すいません)
がんばろう!日本語を使っても大丈夫です。ビデオを見ていただきありがとうございます。
Sir roscoe.is it advisable.on ar chassis?
Yup. People use them in many types of chassis these days. Fma, s2, ma, ms, and so on.
Bang bikin video tempat yang main tamiya di jakarta dong
Kira2 kalau sama fl system lebih baik yg mana ya om untuk kestabilannya abis loncat?
saya belum pernah buat perbandingan sayangnya
@@roscoechannel oh gitu, anchor bumper ini persis sama buildnya ya untuk yg lomba di graha 26-08-18 yg bisa ada " upward angle" karena rollernya di atas frp semua ?
Tnyata pemenang jcup rollernya pada di atas juga banyakan. Jd masalahnya bukan dsana. Hehehe
@@roscoechannel oh gitu, oke om , thx.
Bang boleh nanya ga
Sebenarnya lebih kenceng Tamiya yang dinamonya di tengah,belakang,apa di depan bang?
Semua bisa jadi kencang. Tergantung setting juga. Motor jadi faktor memang, tapi bukan segalanya.
@@roscoechannel oh terima kasih 😀
Test run
Watch the next video 👌
ローラーステーの引っ掛かり防止カーボンは、一枚のFRPに4ミリで穴を開けてキャップスクリューを埋めて引っ掛かからないようにすればいらないと思います❗
それは私がFRPを使っていたからです。今、私は単一のカーボンプレートを使用しています。 👌
ご覧頂きありがとうございます。😎
Bang mau nanya itu tamiya kaya gitu udh siap main psarannya brapa bang ?
3jtaan gan
Kapan mau dicoba di trek nih?
Sudah gan di sini ua-cam.com/video/uYuMUZ46ick/v-deo.html
where can i get that rubber tube at 8:22
You can get it from the part that I've shown on the brake plate section. I forgot the exact name and the item number
thanks!
Om jamur beli dmn ya?namanya apa
Bang roscoe sebenernya Klo Stabilizer Roller Bisa dibikin gak? Sama klo dipertandingan legal gak? Terimakasih. Wkwk
Bisa aja. Cuma Indonesia sepertinya masih menerapkannya 6 roller saja. Mungkin ada beberapa yang sudah menerapkan unlimited roller juga. Kembali ke penyelenggara.
Bang, dinamo merk tamiya apa yang paling santer.?
Kira2 bisa melewati 5 trek saat loncat...
Pake Mach Dash Pro aja
Thanks bang,
Mau langsung cari di toko online.
Mach dash pro koq double shaft yaa,
Sasis saya FMA
Nonton ini dulu sampe habis ua-cam.com/video/OMnP4NsCOpU/v-deo.html
Where u come from bro? I see indo sub and nihongo
I'm from Indonesia
Im from kuvuki land, wkwkwk
malaysia/indo caption???
Available
Om. Itu nama mata bornya apa ya? Yg ngebentuk pola mangkoknya..
Nggak tau namanya om
Bro kalo system yang paling basic untuk ar chasiss apa ya?
Buat rigid dulu aja gan. Atau sliding damper depan belakang jg oke. Coba lihat cara buildnya di video Building AR Chassis saya
Roscoe Channel ok
Itu yg warna biru ditempel apa yah?
Sudah dijelaskan di videonya gan
Klo di ma bisa juga gak bang ??
Bisa boz
Pertamax
Mantap!
Yang seperti jamur itu belinya dimana
Coba cari di toko online aja
Maaf tlat bang ohya
Ngomong opo toyoo Yo 😅😅
Bang emng boleh dipotong ²?
Boleh. Kelas ini boleh.
削り過ぎた時は、シャーシにポリカを貼ると良いと思います❗(^-^ゞ
はい。ありがとうございました!良い考えです。👍
逆に綺麗に削ってブレーキスポンジを、貼っても良いと思います❗
Ko masih sama pake bahasa inggris..?
Bahasa international. Ada subtitle Indonesia kok.
Plisss STCB bg
Bnyk jga yg mw bljar tamiyaan 😁😁🙏🏻🙏🏻🙏🏻
Nanti dpikir masak-masak dulu yaa. Hehehehe
Kok gtu sh bg kudu mkir dlu
Krn gak punya barang2 STCB. Butuh sponsor deh. 😅
Om tanya nama mata bornya donk apa?
Wah gatau namanya bro
@@roscoechannel siap thx bro
Om tanya lg...itu ngunci pernya sampe abis atau gmn?
Di tutorialnya gimana? Saya sndiri lupa deh. Coba dilihat lg. 👌
Kalo nyebun nama aksen nya jangan di rubah kak ke Inggris
Aksen?
Ini akun sebenernya orang indo apa jepun? :V
😄
Beli yang jadi dong
👍
Title: Anchor Bumper.
How it is said properly: an-khor bam-pe:
How many people actually say it: anchur baper 😂😂😂
Maaf bro, just kidding 😀
日本人なんですか?
いいえ。私はインドネシアのレーサーです。😊
ga efektif bumpernya karena mentok chasis
Tp kenapa juara di Japan Cup pada pake bemper ini ya? 😆
G bisa basa engres
外国人が日本のホビーを熱くかたってんじゃねぇーよー
燃えろ! 🔥🔥🔥
多くの国がこの趣味を演じています。😁
Anchor vs fl system enakan mana larinya om?
Enak dua2nya. Tergantung settingnya gan.
Pivot mix fl dalam 1 mobil pernah nyoba om?
@@awchannel5157 nggak pernah