FIX HACK DIY : Fix Broken Fire Starter / Igniter (Gas Stove Series 2/3)
Вставка
- Опубліковано 18 вер 2024
- Part 2/3 of Gas Stove FIX HACK DIY Series.
Diagnose igniter issues to fix electronic ignition gas stoves. This particular unit had the ignition knob shorted and the fire starter probe broken. Cleaning the debris from ignition knob and fixing the starter probe solved the issue.
Learn how to diagnose common kitchen / household or even Campervan or Caravan. This is a 3 part video series, watch the other videos in this series on DIY Gas Stove
FIX HACK DIY : Gas Stove Battery Change for Electronic Fire Starter (Gas Stove Series 1/3)
• FIX HACK DIY : Gas Sto...
FIX HACK DIY : Fix Broken Fire Starter / Igniter (Gas Stove Series 2/3)
• FIX HACK DIY : Fix Bro...
FIX HACK DIY : Preventing Yellow Flames (Gas Stove Series 3/3)
• FIX HACK DIY : Prevent...
#repair #fix #stove #gasstove #diy #fixhackdiy
Thank you! thank you! thank you! I knew I had some kind of circuit problem and I went all over the web to get an answer. I even bought new leads from aliexpress. still no luck. Somehow I came across this video and now my stove is working 100%. WD40 and a nail file did the job lol! And I am also rather happy to hear an accent from just down the road.
With much gratitude from SGP
Sandpaper and filing the igniter probe works! Great advice! Loving your videos, which are straight to the point, helpful and clear. Thank You
Used this video to fix a knob control that wasn't working by cleaning it out. Had a gas engineer tell me it needed to be replaced. Great video
Nice work!
This is a good fix
Great video thank you so much! Two of the porcelain insulators on my burners are cracked grounding the spark too far from the gas. I was considering using epoxy but afraid it wouldn't insulate sufficiently. Going to do this now, thanks again!
Glad it helped
This video was really helpful! Thank you
Hi Kaki, my stove cooker is not burning, the ignition works well and it lights, however after 2seconds it does not light goes dead. I have cleaned with precise steps and still not burning when lit. Is there any suggestions you can perhaps give to fix .i'd really apprectiate . Thanks
This worked for me. Thank you so much
You're welcome!
Good info 👍
Very informative
Where to buy those kind of enamel to use
It’s an epoxy glue… or AB glue
My ignition doesnt stop spraking even i dont have touch it can i get your opinion sir
Clean the contact points inside of the Knob.. might have something shorting the contacts.
What type of glue ??
Sir kindly tell,,, when I insert cell in gas stove cell get wet and watery kindly give the solution.
Hi, my burner did not ignite and not producing spark at all. Not giving clicking sound after replacing battery, for all 3 burner. The positive polar of the battery connector a bit rusty so i have clean but still same. No spark. Is that mean the igniter need to be replaced?
I have the same question
Mine also same issue.
How about the botton?you have a link?
So can you do something like this if your gas oven is lighting up but only heating a little biy
Bit