This video just is very great info, just pop my 1977 hiace transmisión riding down a hill, in 1st gear beacuse of a heavy tráfic with 10 passingers 🤪 but don't think I be able to do the work. What a amazing job sir! 👏👏👏
Hi.... Excellent job.... in june I get a problems with my Hi ace 95' transmission, the gears of 3th was broken, and has to reconstruct totally. My work do'nt look so nicely like yours, but my vans is on the road again. Thank for share your video.... is an inspiration for those who take in our own hand that types of work...
Using a metal hammer on the bearing journal to knock out a locking ball??? Not lapping the synchronizer to the cone??? Not even bothering to clean off the bit of gasket material on the sprocket??? With all due respect of the hard work put in, it is the careless attitude to such fine details that will affect service life after the rebuild.
very perfect keep up brother,the syclonizers still work though from Taiwan ,where do I get this lubricants to wash this gearbox housings also work in a mechanical industry but self employed
The most wonderful work I have enjoyed so much watching it because I have been looking for it for a long time .... Greetings to you from an Egyptian follower👍👍👍
Should clean the dirt and grit before dismantling the unit. Limited tools. Any and everyone does a restoration video now no matter the quality of work.
I don’t understand why mechanics don’t like to use power tools. There are power tools available in any size of any style with precise torque. It’s much faster, easier and more efficient. It saves time and labor. Can any mechanic explain that? By the way good job at restoration.
Tengo una caja de Toyota hiace quiero saber si se puede poner una palanca directa desde arriba y colocarlo en un Jeep ika?la caja es toda de fundición de hierro
Сделал все красиво. НО! Слишком много герметика, слишком большой слой. Излишки герметика выходят не только наружу, но и внутрь коробки. Эти излишки со временем отрываются и попадают в рабочее пространство между шестернями, роликами подшипников и забивают масленые каналы (детали остаются без смазки). Наноси тонкий равномерный слой, чтобы при сборке на стыках была тонкая, РАВНОМЕРНАЯ по всей длине линия герметика, например в толщину рыболовной лески. А так, все круто!
is this a transmission of Toyota hiace commuter van? i have some job now the problem is there is no reverse if i shift in reverse the van will go forward? what is the problem?
@@sonnymendoza9654 Sonny Mendoza hahahah No stupid it's clearly by uniform and most clearly is Maintenance method it's femous by Pakistan ppls. Have a great day to smiling armpit of your 🐕 as way of your dirty recognization 😂😂
واہ استاد جی مزہ آ گیا دیکھ کر..... ذبردست
THIS is how a master does it. mandatory viewing for any mechanic
I do not understand why this video has so many I DO NOT LIKE, if this content is of quality. Thank you very much for making this type of video.
This video just is very great info, just pop my 1977 hiace transmisión riding down a hill, in 1st gear beacuse of a heavy tráfic with 10 passingers 🤪 but don't think I be able to do the work. What a amazing job sir! 👏👏👏
It would be at least 50% lighter if I did it ! Great video.
una vez mas....la herramienta no hace al mecanico..exelente trabajo señor.
Hi.... Excellent job.... in june I get a problems with my Hi ace 95' transmission, the gears of 3th was broken, and has to reconstruct totally. My work do'nt look so nicely like yours, but my vans is on the road again. Thank for share your video.... is an inspiration for those who take in our own hand that types of work...
Pure handmade skill
lol.... I would have at least 10 extra parts left over if I attempted that, thus the reason I am a viewer only.. ;) nicely done sir.
If the gearbox is in good condition, pls don't dismantle it, just clean the grease or oil outside and change the fluid if necessary.
Impressive work, thanks for sharing the video 👍
Hello, Master? What specific cleaner did you use in cleaning?
Using a metal hammer on the bearing journal to knock out a locking ball???
Not lapping the synchronizer to the cone???
Not even bothering to clean off the bit of gasket material on the sprocket???
With all due respect of the hard work put in, it is the careless attitude to such fine details that will affect service life after the rebuild.
And what more do you expect? They have only hammer, screwdriver and one broken torx wrench.
And look at where they come from.
If they had a copper hammer i wouldn't be cringing as much
Ur attitude is from the land of the plenty, in lands of scarcity, you make do
@@OboteOjok oh well said well said brother
Great working
Nice work!!!! looks new.
Perfect restoration keep it up 👍👍👍👍👍👍👍❤❤❤❤❤👌👌👌👌👌👌👌👌👍👍👍
very perfect keep up brother,the syclonizers still work though from Taiwan ,where do I get this lubricants to wash this gearbox housings also work in a mechanical industry but self employed
Perfect video where do you buy ur parts from to replace the old gears etc
I feel you did a great job on refurbishing this this older transmission so it may work for many more years 👍.
Very hard & Nice Working Mr. Tool Good Luck
BRAVO MR. BRAVO!
Lo felicito por su trabajo
The most wonderful work I have enjoyed so much watching it because I have been looking for it for a long time .... Greetings to you from an Egyptian follower👍👍👍
You are brilliant...
perfect work
Eu gostei muito mas gostaria de ver a primeira tapinha que tiraste das mudanças.
يمكن الي مسوي المقطع عراقي .. الادوات كلها كانه منا من السنك .. بس فدشي يجنننن
That is nice sir. Kudos keep it up.
Good work👍🏻
Nice job ! What was the problem with this gearbox while driving ?
❤❤❤❤❤❤عالی
Great work
I like the video and subscribed
sir very good restoration
Your very talented. Synchronizer replacement parts are Taiwan made. From Marikina, Philippines
steve bonsol
That's a lot elements, in America people lazy to do, just buy another one and put it. Ways cheaper then clean.
Wow just wow :)
need to visit your workshop Mr where is it am In Kenya
I love my job
Especially when I am repairing gear box
Thanks 4 sharing
Excellent job. How on earth do you remember the order in which every component must fit back in!? Hats of to you Sir
Rewind the video. Done.
This is just ART AT ITS FINEST! wow great job Sir
Good work
Awesome Mr tool can u do one on a nissan1400bakkie tanx bro
Nice restoration, but stop putting silicone gum inside the bolt hole
А что было сломано?
Мыть кожух сиысла нет, через неделю будет грязным 😊
Great job
Impressive.
You're very good, I use this van, I will remember as a repair guide,But now that the transmission oil oozes out, what to do? thank you very much
Thank you!
From what I see Im calling it a 5 speed looks like some Hi-Lo range going on? Bro you re-used the old cage bearings??
Beautiful
Hi Mr.Tool 👋👋👋very good restoration gearbox 👍👍👍 and video cool 🤝🤝🤝
Perfect boy
Nice job
Should clean the dirt and grit before dismantling the unit. Limited tools. Any and everyone does a restoration video now no matter the quality of work.
The hardest part is you need to memories install sequence of every gears 👍
Good job
Critical part in engine nice work sir
Thank you uncle
good thanks
Magnific
Can you film the same work on the Peugeot 504 gearbox ?? Excuse please
Abosagda Hassan like
How much that kind of service including parts replacement?
Nice
Hi i am from Perú i have one question wirtch Gearbox G52 Joe many hp's stock can suport? I upgrate my motor for 2jz GTE THX.
I don’t understand why mechanics don’t like to use power tools. There are power tools available in any size of any style with precise torque. It’s much faster, easier and more efficient. It saves time and labor. Can any mechanic explain that?
By the way good job at restoration.
Tariq Choudry most do use power tools
ربڑ کا ہتھوڑا استعمال کرو 👍
Tengo una caja de Toyota hiace quiero saber si se puede poner una palanca directa desde arriba y colocarlo en un Jeep ika?la caja es toda de fundición de hierro
Máster...
I got 5 of these gearbox ready to use after full servicing..... Lazy people always buy new ones made in china and i can keep the original for cheap🤣🤣
where do you work? do you accept commissions?
Сделал все красиво. НО! Слишком много герметика, слишком большой слой. Излишки герметика выходят не только наружу, но и внутрь коробки. Эти излишки со временем отрываются и попадают в рабочее пространство между шестернями, роликами подшипников и забивают масленые каналы (детали остаются без смазки). Наноси тонкий равномерный слой, чтобы при сборке на стыках была тонкая, РАВНОМЕРНАЯ по всей длине линия герметика, например в толщину рыболовной лески. А так, все круто!
Awesome
is this a transmission of Toyota hiace commuter van?
i have some job now the problem is there is no reverse
if i shift in reverse the van will go forward? what is the problem?
Que modelo de caja de cambios es ?
Good pm sir, my name is engineer gaius I repair all cars but I have a question to ask about gear box? Can you help me at pls
Bos hinde papalitan lahat ng bearing?
Hola a esa caja de velocidades se le puede poner una palanca para arriba para colocarla en un Jeep ika
super
اناةاللي شايفه كل شي المطرقه يطلعه 😂😂😂 .. يا ولد انت صاحي
Names of the Cleaners used in this?
ممتاز
مشاء الله على التجميع
انا مكنيكي جربوكسات .ابحث عن فرصة عمل.ساعدوني . شكرا
😮😮👍👍👍👏👏
Mlm bosq mobil majikan ku hiace disel juga persenelen gigi 1,2,dan gigi mundur/ antret selalu muntah minta solusi nya makasi
Gostei muito da aula parabéns! Obrigado.
???
So what was the problem with it? Were we supposed to guess?
Why no narrative?
master hammer
An ashok leyland dost RSB gear box
Oil??
What country is this
What is the code for this transmission.
,how much dollar
Dude, invest in a plastic face hammer.
Зачем разбирал,??? Помыть можно без разборки!
синхронизаторы вроде менял
Lets fix a gearbox with a hammer. Good idea.
reuse all bearing?
Still in good condition,why not???
ههه
Definitely Parkistani person working 😂 Great ppls
How did you know??? Have you smelled his armpit in the video????
@@sonnymendoza9654
Sonny Mendoza hahahah
No stupid it's clearly by uniform and most clearly is Maintenance method it's femous by Pakistan ppls. Have a great day to smiling armpit of your 🐕 as way of your dirty recognization 😂😂
@@Ahmed-AlSharahili no dumb ass he is a syrian
Waste of time Toyota gearbox never gives up I have never seen Toyota Hiace gearbox giving trouble so you waste your time pal
Any transmission will fail with enough abuse, and since this one was so dry inside that it didn't even drip when he cracked it open . . ..
РУКАЖОП.....