This was the first job in years that beat me. Nothing I did would get this thing to move. Finally gave up and had a shop remove it. Appreciate not making it look like oh and it just pops right out. So easy anyone can do it.
I enjoyed this refresher lesson. I’m getting a little older and can’t do what I used to but you exercised my brain as I followed along. I found it a bit funny when you couldn’t break that bearing loose from the backing plate and had to resort to heat and an impact chisel. Reminded me of the good old days! Thanks for not editing that out. Did you put the star wheel in backward? The long side of the spring is designed to clear the teeth on the star wheel. You had the spring on top of the teeth. 🙀 Thanks again. 👨🏽🦳
Thanks for the tutorial. Im no mechanic but my hubs are super bad and i have to replace them real soon. I would have been a lot more worried about doing it myself if it weren’t for your video so much appreciated.
Can I remove the wheel bearing without removing the brake caliper bracket? My bracket is seized and the bolts are stripped. So I'd love to just remove the whole thing all together
Good video. I will buy new the plate of shoes and need less time in the repair it. Other I try is with a sliding hammer, like use with axe and try pull out. 🙏🙏🙏🙏
Holy hell i love these videos it makes me laugh so hard when in the next scene you see a bunch of liquid sprayed onto the hard parts they cant remove easy, " now we brought in the skid steer with the jack hammer attachment hopefully we can get it off " damn I'm still cracking up I swear I thought he was gonna bring out a 90 pound jack hammer 😂😂
I have a 2013 Camry and had to change the rear bearings. This video is 100% accurate how difficult it is to separate the bearing hub from the plate. A torche and a heavy hammer separated it. But damaged the back plate. Now my emergency break pads slightly squeak.
Why would you put that rusty rotted backing plate back on? You save the customer $20.00 and that backing plate is gone in a year or two and then you have everything getting shitty. Just an observation.
This seems like a very stupid design. Better to have a spindle on a shaft and a sealed bearing, instead of a single assembly. That way you can use a puller to pull the spindle off the shaft. Atleast theyre not terribly expensive, but far more expensive than a bearing by itself. I truly hate new cars.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Visit-1AAuto
√ Do it Yourself
√ Save Money
I'm glad I live in in the south. I've been working on cars for 24+ years and have never had any rusty nightmares like this lol
This was the first job in years that beat me. Nothing I did would get this thing to move. Finally gave up and had a shop remove it. Appreciate not making it look like oh and it just pops right out. So easy anyone can do it.
I enjoyed this refresher lesson. I’m getting a little older and can’t do what I used to but you exercised my brain as I followed along. I found it a bit funny when you couldn’t break that bearing loose from the backing plate and had to resort to heat and an impact chisel. Reminded me of the good old days! Thanks for not editing that out. Did you put the star wheel in backward? The long side of the spring is designed to clear the teeth on the star wheel. You had the spring on top of the teeth. 🙀 Thanks again. 👨🏽🦳
Always plan a new backing plate in this job. They are relatively cheap considering.
Well, detailed video thank you. You have covered all the problems that a tech could encounter.
Thanks for the tutorial. Im no mechanic but my hubs are super bad and i have to replace them real soon. I would have been a lot more worried about doing it myself if it weren’t for your video so much appreciated.
+@user-fv9px7rf2t Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Why not just replace the backing plate ? Seems like alot of work to get the bearing out.
I have been doing this for many years!Easy as pie!Of course a lot of people don’t know how to do things like this and need to learn!
Can you make a video for wheel bearing replacement of a Toyota Corolla 2012
Would a bad hub cause a rough sound?
Can I remove the wheel bearing without removing the brake caliper bracket? My bracket is seized and the bolts are stripped. So I'd love to just remove the whole thing all together
Do,do I need a new alignment after?
Where can I buy the dust shield and backing plate?
Good video. I will buy new the plate of shoes and need less time in the repair it. Other I try is with a sliding hammer, like use with axe and try pull out. 🙏🙏🙏🙏
Holy hell i love these videos it makes me laugh so hard when in the next scene you see a bunch of liquid sprayed onto the hard parts they cant remove easy, " now we brought in the skid steer with the jack hammer attachment hopefully we can get it off " damn I'm still cracking up I swear I thought he was gonna bring out a 90 pound jack hammer 😂😂
Yeah the dust shield needed replacing anyway
I have a 2013 Camry and had to change the rear bearings. This video is 100% accurate how difficult it is to separate the bearing hub from the plate. A torche and a heavy hammer separated it. But damaged the back plate. Now my emergency break pads slightly squeak.
Dude, you did not clean the brake shoes after you put them back on. They have now copper paste on them from your gloves. Quite sloppy.
Waisted time for rusted backing plate
You need a hole new back plate anyways that one is all rusty and old you might as well just put the new bearing into a new back plate 😂
Why would you put that rusty rotted backing plate back on? You save the customer $20.00 and that backing plate is gone in a year or two and then you have everything getting shitty. Just an observation.
This seems like a very stupid design. Better to have a spindle on a shaft and a sealed bearing, instead of a single assembly. That way you can use a puller to pull the spindle off the shaft. Atleast theyre not terribly expensive, but far more expensive than a bearing by itself. I truly hate new cars.
lol that whole thing was rusty u stil put it bak
oh shit...