Timber and how I cut many studs!!!!!

Поділитися
Вставка
  • Опубліковано 13 гру 2024

КОМЕНТАРІ • 52

  • @terencecottington4273
    @terencecottington4273 16 годин тому +8

    Always a pleasure watching a true craftsman at work. Looking forward to the next one...

  • @BespokewithOak-d5c
    @BespokewithOak-d5c 4 години тому +3

    Been following you for years Robin, (at first with skillbuilder) I find your work and presentation content inspiring. Over the last 3 years I have built my own house and just finishing an oak framed garden room extension. You and the likes of Carl Rogers and Leo from Samson boat builder have given me the confidence and courage to fulfil my dream. Keep it up, we still have so much to learn.

    • @ukconstruction
      @ukconstruction  3 години тому +1

      Thank you for your message I am happy to be considered alongside Carl and Leo!! thats cool!!

  • @nickdawson9270
    @nickdawson9270 15 годин тому +2

    Impressive productivity too! Taking the saw to the wood rather than the wood to the saw clearly makes a big difference to getting through the work. Thank you.

  • @Mark-gf7yw
    @Mark-gf7yw 15 годин тому +5

    The bond is shocking on that brickwork 😳

  • @stephengibbon2002
    @stephengibbon2002 4 години тому +1

    Not all drivers are like Richard a good driver makes your job easier top man Richard 👍

  • @SteveStevieboy
    @SteveStevieboy 13 годин тому +2

    Like the way you work Robin,nice simple jigs that make your work very accurate! Been watching your videos for a few years now and I find myself using rods and jigs a lot more . Thanks for producing these informative videos and really looking forward to seeing this build coming to life👍👍👍

    • @FiscalWoofer
      @FiscalWoofer 4 години тому +1

      I always run, story sticks for this or simple jig for lots of cuts it saves hrs perhaps days. Worked with another carpenter recently, he said mate you have done anything yet it’s too slow…1hr later I’m finished and he is still measuring with crap everywhere! It also keeps things organised!

    • @ukconstruction
      @ukconstruction  3 години тому +2

      Nice one!!!!!

  • @antonoat
    @antonoat 14 годин тому +1

    What a pleasure to see professionals at work, don't ever underestimate the skill set these guys have, making it look easy is the icing on the cake! Robin life would be so much easier if all builders worked to your standards, perhaps one day they will! Cheers. PS What a huge difference cordless tools make, so much safer too!

  • @dmc7324
    @dmc7324 16 годин тому +1

    Done a few timber framed buildings and I think as a joiner they are so satisfying to build.

  • @larbi3568
    @larbi3568 14 годин тому +3

    im a diyer and have learnt so much from watching all your videos,thank you!!

  • @cannontrodder
    @cannontrodder 13 годин тому +3

    No matter what job I do, if there’s something I have to repeat, I will consider making a jig like you did to repeat those cuts. The simpler you make it, the less energy you spend on it and when you are less tired things go well and are safer.

  • @woodworkingphoto8083
    @woodworkingphoto8083 18 годин тому +2

    Your videos are so well produced Robin.

  • @conorcullen1
    @conorcullen1 15 годин тому +1

    You're an inspiration Robin. Looking forward to the next one

  • @johnchincotta1qwdb15
    @johnchincotta1qwdb15 15 годин тому +1

    Hi Robin,superb job Always attention to detail,

  • @khansk36
    @khansk36 13 годин тому

    Luv ur percision and techniques
    Thanks 4 sharing its like watching an artist at work

  • @samposton9101
    @samposton9101 13 годин тому

    Super work Robin, thanks for sharing

  • @curtisclark1292
    @curtisclark1292 15 годин тому +1

    Great series so far robin!

  • @bearhauscubly
    @bearhauscubly 18 годин тому +1

    Lovely job you are on! I took inspiration from your pack cutting years ago with a little metal angle at the end. Having the side pieces in will be an improvement we need to add.

  • @kevinlawes591
    @kevinlawes591 18 годин тому +1

    Looking fantastic mate 👍🏻👍🏻

  • @noelkenny7504
    @noelkenny7504 17 годин тому

    Another great video of a great craftsman at work

  • @garyhollywell2112
    @garyhollywell2112 16 годин тому

    Brilliant as ever really looking forward to watching the whole series and it will be great to see Ed back in action (has he grown any taller!!)! Thank you Robin as always for just simply brilliant content.

    • @ukconstruction
      @ukconstruction  3 години тому

      Thanks Gary!!! yes Ed seems even taller now!! its been great having him back!!

  • @nigelscott1922
    @nigelscott1922 16 годин тому

    Love your videos. You obviously only work for well off clients, the sort I dream of.

  • @Kevin-cy9cv
    @Kevin-cy9cv 17 годин тому

    Neat and accurate, looks good

  • @danthechippie4439
    @danthechippie4439 2 години тому

    Hi Robin, good tip with the block you screwed on, i though you use your milwalkee rear handled saw for first fix?

  • @nickdawson9270
    @nickdawson9270 15 годин тому

    Impressive mech handling!

  • @markdyballuk
    @markdyballuk 17 годин тому +1

    so good Robin, you're a lovely fella too. positivity mate all the way

  • @pettofficial.
    @pettofficial. Годину тому

    Great job, I like a quick jig for repetitive cuts, just wondering why you're not cutting the timbers from the left hand side, rather than reaching your left hand over to hold it and right cutting underneath your arm, looks a bit awkward?

  • @jackmidd123
    @jackmidd123 3 години тому

    What do you call that type of wall? If you were asking someone to quote for building it. A wall that you timber frame on top of.

  • @supertedm5
    @supertedm5 15 годин тому +10

    I wouldn’t normally say anything negative but my god that brickwork is shocking

    • @woodbutcher
      @woodbutcher 4 години тому +1

      Why?

    • @Keverz16
      @Keverz16 Годину тому

      How? 😂

    • @mickeytherye
      @mickeytherye Годину тому +1

      There’s only one face side to a nine inch wall, you must be commenting on the inside.

    • @heriothandyman3148
      @heriothandyman3148 46 хвилин тому +1

      Internal. Never going to be seen , bricks aren’t perfect, uniformed size.
      No single-skin wall would ever be perfect on both sides.

    • @mickeytherye
      @mickeytherye 27 хвилин тому

      A quick going over with a brush head wouldn’t of gone a miss on the inner skin, top brickwork thou looks mint, nice to see a bit of Flemish bond👌

  • @happiestoutside
    @happiestoutside 45 хвилин тому

    Great method for templating/jigging your studs, Rob 👍 Do you find it's worth cutting the end off square to start with to reduce chance of inconsistencies or happy with how it's sawn generally for first fix construction?

    • @ukconstruction
      @ukconstruction  32 хвилини тому +1

      These ends are almost perfect and by using the stop on the template across the full timber end width it will never be too long or short

  • @RG-Factotum
    @RG-Factotum 16 годин тому +1

    Robin, do you square one the ends of the 6 X 2 before cutting to length? I ask because I found that the timber on delivery does not always have true square ends - it can vary by a couple of degrees, throwing off the studwork in bigger walls. Having been out of the trade for years and then returning, it was noticeable that the guys took it for granted that timber deliveries had square ends and they would just cut studs without checking the end they measured from.
    Well done on giving carpentry and joinery a good public persona.

  • @DWR82
    @DWR82 4 години тому

    They should've got your brickies in

  • @spotoncarpentry
    @spotoncarpentry 16 годин тому

    Hi Robin. I love watching your videos... thanks for sharing you stuff, it's great. One thing came to mind when watching you cut the studs to length....my Makita cordless saw is the other way round, i.e. the blade is on the left side. So if you had my saw using this method you wouldn't have to stick your left hand over the saw to hold the template stud, it would be to your left. I know it's only a minor thing but if you're cutting loads this would make it slightly easier. And this has just made me think now why some saws are left blade and some right ? Do they make one of each side for all models ? i don't think so.. That's a video idea for you there !!!

  • @magneticranners
    @magneticranners 17 годин тому +1

    Hi Robin. Are you available for private self build projects other than what you do on UA-cam etc?

  • @El-Goolps
    @El-Goolps 13 годин тому

    Is there a preference for doing it on the left end overhand instead of the right side?

    • @nickhaley4663
      @nickhaley4663 12 годин тому +1

      I think that’s just because the saw has the clearance on the right,

    • @nickhaley4663
      @nickhaley4663 4 години тому

      Now, if he used his Milwaukee rear handle saw he could do it on the right 😄

  • @RichieRich845
    @RichieRich845 14 годин тому

    👍

  • @Finny14754
    @Finny14754 3 години тому

    Now I’m an electrician and as everyone knows , we ALWAYS leave sites SPOTLESS. Not once has anyone ever found even a trace that a sparky has been onsite.

  • @aaronbell8527
    @aaronbell8527 18 годин тому +2

    Good set up but why don’t you cut from the other side so you don’t have to cross you’re hands
    And be more
    Comfortable

    • @vandyFixer
      @vandyFixer 17 годин тому +3

      It is hard to tell from the video but to get the depth of cut with that saw the motor might foul the guide board 2x6 in that orientation.

    • @chrisdavies6633
      @chrisdavies6633 16 годин тому

      Hi robin where have your apprentices gone

    • @tracer1127
      @tracer1127 12 годин тому

      I thought that just looking at the highlighted clip