Fitting A New Steering Pump & VCDS Coding To My Copart Salvage Audi A1
Вставка
- Опубліковано 10 вер 2024
- Fitting A New Steering Pump & VCDS Coding To My Copart Salvage Audi A1
I Cant believe how far the project has come along from when we first started.
The end is finally insight & I can't wait. Just tying up a few loose ends
The Project is slowly breaking me I needed a break to recover but I'm back & ready to crack on & get this project finished.
This is where all your hard work either pays off or not.
Finally, the project car is starting to take some shape.
The cost of Audi A1 parts is ridiculous & slowing down the project. Let's see how far I can get today?
I'm investing in the project. After all, this is what the channel is all about saving those cars from the scrap yard.
Full strip-down of the front end of my Audi A1 Copart Uk Salvage Rebuild Project.
Ryobi 18v Impact Wrench bit.ly/32LFcnK
HalfordsAdvanced Socket set bit.ly/2RJiSoo
Sealey bottle pump amzn.to/2ZNTl1C
Wire Connecters amzn.to/3jleyaw
Automotive Tape amzn.to/3b6lmGj
This is Probably The Worse Car I've Bought From Copart UK. New Car For The Channel Category S Audi A1 TFSI.
This series will follow me on the journey through buying damaged salvage repairable Cars from an auction. Then restoring back to their former glory.
Flipping them to make a profit to buy more higher-end cars. Follow my dream of owning a supercar.
FOLLOW ME
Instagram: / reviving_salvage
Facebook: / reviving.salvage
#Audi A1 #Salvage #copart
Thank You For All Your Support, I really appreciate it
It worked! 2012 Seat Ibiza 1,6 TDI.
Power Steering pump replaced by previous owner but never coded to the car, which is why the power steering light was on. The pump must have been from a car with the g250 sensor (right connector on pump)
I’m glad it worked buddy
Great job! Practical Mechanics that take the dealers out of the equation - keep up the great work!
Thanks very much fella I really appreciate it 👍.
Mate go into options on vcds you can adjust the screen size so we can see it better thanks.
Sorry im new to VCDS I will try & and record it better next time thanks for watching 👀
With regards to your open circuit - check the earthing locations making sure there's no rust etc, if that's all clear with the engine running unplug the connectors and using a multi meter test the plug pins to see if the current is flowing and at what amount, then keep the positive connected to the plug and the negative to the body if you get the same reading on all affected sensors then that points to something else, the only other thing you could try and that would be to snip the earth wire and make a new one to a known good earthing point just to rule that out, should the last bit fix your issue then your earth wire has damage and isn't conducting the known correct values
Thanks very much for your advice I will definitely have a look 👀 tomorrow & see if I can fix it.
My A1's thick red has full volts and brown has good ground but the 3 wires and only one of them has current in it rest 2 do not. After front crash my steering is rock hard
Super helpful 👌 ❤
Thanks mate just copied your code and it worked perfect I don't know how but looks all has same code😊👍👍
Happy days I’m glad I could help
Have you checked the o2 sensor heating circuit itself on the sensor itself with a multimeter for continuity ,usually the two white wires on most sensors is the heater wires
I often get Earth faults on lambda sensors especially after a front smash. Just replace the sensors. They can easily get damaged but nothing visible.
I would love to change them fella but they are £100+ each 😪 I haven't used a multimeter yet going to try that first hopefully I can spot a easy repair... thanks for watching buddy I really appreciate it 👍.
@@RevivingSalvage I’ve never bought a new one. Can’t speak for VAG ones, but Fiat 500 secondhand ones are plentiful on eBay.
Why is it whinning like that when u changed the pump ? Is it normal to whine when u are turning the steering wheel? Is your steering heavy ?
If you make some cups I’ll buy one just for how much this video helped me brother! Love the vibe! Keep up the art! 💚
thanks very much I'm glad I could help. That's what's it all about
Well done fella Nice job 👏👏
Thanks very much 👍
Interesting content that. Black art with the vcrs. Keep up the good work.
Thanks very much 👍
****OPEN CIRCUIT FAULT***Hi mate check fuse sc2 on fuse carrier ST3 RED its a + feed to the o2 heater circiut and j496 relay. It should be located on the dash side panel when you open the drivers door
Thanks very much 👍 I've saved it ... it was a blown fuse ... top man ..
@@RevivingSalvageSo Glad you sorted it pal faults like those can drive you mad.
Great video (if you're not in a hurry}. Thank you.
Glad to hear 👍
Well done , finishing line insight, great content .........
Thanks very much 👍 won't be long now...
Changed a few of these and never long coded just clear codes
Had exact same issue didn’t know it was coded sorted with your video 👍🏽
Good job, enjoyed that
Thanks very much 👍
Thanks mate
You safeme !! thanks a lot. ❤
I have a red warning light «steering defective» after changing the pump on my A8 D4. Pump work fine tho… i did not note the old soft code… what do I do now??
If you still have the old one perhaps you could plug it back in and make a note of the code, if not then you might need to get someone to code it into the car for you,
Great content well done
Thanks very much 👍
Why is it whinning when u installed a new steering pump? Is it normal to whine like that when you are turning steering wheel? Is steering heavy with this new pump?
Thanks for the video!
Glad you enjoyed 😉
@@RevivingSalvage It was very helpful! We have changed that to my friend in his Seat Cordoba 👍
Hi mate I’ve just bought vcds waiting for it to come, do you need to use module security code for coding or just for adaption ?
Question, so exchanging this thing will not work without coding it????
It will probably work but you will have a amber warning light on the dash for a steering fault, it needs to be coded to the car
Sir my polo 1.9 TDI 2005 model has the same pump but one of my connectors on the side the wire broke off pretty bad to a point I cannot mend it together, what is that name of that part and where can I buy a replacement part
I've got vw polo 2014 the truning signals all and the. BRaking lights don't work in diagnosis it comes up that the turn signal and braking lights there is short in sercuite I remove the lights chek them and the fusis it's OK but nothing get fix is there solution
There are three wiring plugs on the pump, but you only connected two ?
There's only two on my Audi a1 the third has a blanking plug that goes on it
Howzit. Battling with a pump for Polo6 GTI. Got the car without pump. Question how many connectors should the pump have? And coding code?
The pump should have 3 connections standard with the polo pumps same as Audi a1
Hi pal where did you get VCDS from?
Hi buddy I bought it from the proper website www.google.com/url?sa=t&source=web&rct=j&url=www.ross-tech.com/vag-com/&ved=2ahUKEwjk0-b1-PDsAhV8QhUIHeEYCxUQFjAAegQIMBAB&usg=AOvVaw3jHqpzmpF7vdkFlbMEbZah
I hope that helps
@@RevivingSalvage How much did you end up paying in pounds and is there a limit of cars you can use it on?
Presumably if you get a pump from the same spec (engine or trim) the coding would be the same?
Hi mate, excellent job. Can you please help me and advise how did you diagnose that the pump is faulty ? I have a1 and its steering is hard as rock and light on the dash. I dunno if the pump is working or not after the crash. Pls advise
Sounds like it's not working... there is a fuse under the bonnet for the steering pump check that first... this normally blows before replacing anything.
I need that done to my Audi a1 it’s still showing my steering light too. Would you be interested in doing it ? I wouldn’t mind paying
I would love to help fella but unfortunately I'm limited to how many times I can use VCDS & I only work on my own cars coz if anything goes wrong then I wouldn't want to be held responsible sorry fella
Hi mate I have a 2007 polo I changed the power steering pump but I currently get error code 01309 and it does not work does it need to be coded ?
same problem
Yes it needs to be coded for it to work correctly
the code is meant to be 11250, how come you used 11251?
they are coded to the car and they are all different, I've had people use the code from my car and its worked for them. Yours might be slightly different
@@RevivingSalvagemy apologies good sir, i was meant to delete this comment but i forgot to, after watching this video last night, i did some digging on the net and came to know that 11250 is mostly used on vw and 11251 is used mostly on Audi's but the biggest difference was the last number of the code, which is connected to the "steering rack type"..0 = 1N2 (Which is for my VW Polo 6R) and the 1 = 1N4 which is used on this specific Audi model.
@@RevivingSalvagebrilliant that code worked for me 👍
had new pump on my vw. Fox can’t get yellow steering light of any ideas 👍
How do I know what steering pump is used for my car any websites?
I have vw polo pump changed but works intermittently. The old pump was taken away and how would you code new pump because i believe that is the reason why it is not working
Did you find a result for this I’ve got the same issue my power steering works but gets heavy when steering too quick
you know what is the coding for the seat toledo 2013??
I think the coding is different for each car so unsure. But not 100% thanks for watching 👀
Hi mate, random question, which cable do you use to connect your pc to car
Cheers
Great video, can you please share the link where you got the pump
The pump was bought from ebay
Hi there great video. One question though, is the whirring sound normal on the replacement steering? I here the same on my Audi A1 as well
Thanks in advance.
I've changed mine & it does have a slight noise but nothing like it was.
Check the fluid level would be my advice first & see if it helps 😉
Thanks for watching 👀
@@RevivingSalvage yeah the fluid was quite low when i bought it so had to top it off. Does the new pump you placed still makes a sound when you turn the steering wheel? Please advise thanks
It does but not very loud unless your full lock
Vcds free download?
Hey, nice video, I own an Audi A1 2012 and have been experiencing a heavy steering wheel for some time now specially at low speeds. The mechanic diagnosed it as pump failure and replaced it, but the issue is not really resolved and no one has a clue what it could be. Do you have any idea or could it be a coding issue? they have coded the sensor to value 6
Sorry only now saw this, it sounds like the pump hasn't been coded to the car and the mechanic has just changed the pump. Did you manage to solve the problem?
@@RevivingSalvage thanks alot for your reply. No the issue is still not solved, I have been driving just like that. Do you mean the code which you showed in the video? for example the code for light vehicle? do we only need to use VCDS software?
@@mukulbandodkar2335hi mate has it been solved now? I got the same problem please let me know what the issue and fix was please
Had new pump on my vwfox can’t get yellow steering light off any ideas 👍👍
If you had a new one it might need coding to the car? The car doesn't recognise the new pump. Or if the battery has been taken off then that would make the light come on aswell & just need to do a wheel detection where you turn the front wheels full lock one way then the other so the computer knows where the wheels are positioned. Hope that helps
Hiya pal, fitted second hand pump to my mk2 skoda fabia. (Same pump and system) light wont go off and power steering works now but seems lazy? Do i need it coded with a vag diagnostic/laptop? Thanks in advance 👌
For the light to go out it will need to be coded. It might also make a difference to the performance of the pump.
@@RevivingSalvage ahh okay, scanned it and it comes up with a 01309 code.. no coms with steering module.... How would i go about coding it? (I still have the old pump)
If you plug in the old pump and note down the code ... use that code to overwrite the new pump ... that should work
@@RevivingSalvage vag software?
That what I used...for mine to work
Hi , did see you change that power steering pump ...
My question is , you seemed to struggle too fit the pump ?? .
Wouldn't it have been easier, to have taken off the wheel .?? Give you more room .?? .
Yeah your probably right lol... sometimes you cut corners to make it quicker but its twice as hard...
Thanks for watching 👀
Happy day's 👍🍺
Whats happening with it now??
All I can say is thank you for your advise you really helped me solve the electrical issues Cheers buddy
@@RevivingSalvage Glad to be of service
Your pump isn't new, so the procedure to code it is different.
If anyone can help who has VW info