My belovéd Granny died on 19 November 1982. The family were not asked about the interior upholstery, so she was buried in a powder-blue arrangement. I remember this until today in 2023.....The blue colour was superb, and much better than deathly white! ❤
Why do the coffins come unfinished? And why is it the funeral directors responsibility to finish them?? Is that a cultural or traditional practice? Here in America we purchase caskets ready made and all of the personalizations are manufactured prior to arrival… Always been curious about this.
If you are being buried, why would you really want to bother about water getting into the coffin? Are you likely to wake up 4ft under the earth and tell the world "theres a leak in my coffin"??? DOES ANYONE REALLY CARE??? YOU ARE DEAD !!!
I've just sent off an application to work in making coffins - fingers crossed I get an interview. I think this would be a very interesting and important industry to be a part of.
Thank goodness I’ve built my own solid oak coffin, I’m in my 70’s so could be moving in soon. No way would I wish to be laid in chipboard coffin. Probably ok if you want a cremation, I’m going in ground so want something a bit more substantial.
Can you explain how lead lined coffins are made and sealed? Like the one the Queen is in. DO they use a torch to seal the lead sheeting? Must be heavy.
Your Country’s Funeral workers and Directors definitely do more of the work than the US does. Seems like this wouldn’t be as less costly and more fit for cremation. I think many American would fall right though ot snap the four handles. US wood casket usually average abou 200+ or - pounds empty.. Yikes were are an overweight Country
what a mess, that must be the worst trimmed coffin i've ever seen, would you like to be shown how to trim one properly. And yes the handles are ornamental, but they also guarantee them upto 20-25 stone in weight aswell.
Thanks your comments are very welcome you are more then welcome to come and trim a coffin i must admit it not my best work thanks for the note about the handles but the one we use are only ornamental i know you can get load bearing handles i am sorry iv our little video has upset you we just trying to get our custmers better informond on solid v foil coffin choice grant
@@countyfunerals I dont see why, as long as you prove to them that you have permission and say its for educational purposes. Institute of human anatomy on here does with preserved ones
Why would anyone want to see a dead body lying in its coffin??? Thats sort of gross - do you expect the woman to look fabulous or the guy to look handsome?? GET A LIFE.
Not once of all the years I was a funeral director would I allow a cardboard box be allowed for a pillow. That’s a total disgrace and your coffin trim and side sheets are awful and the breast plate should be 21 inches from the top edge of the lid. If you can’t get it right then get out of the trade. I started my career back in the 60s before this chipboard and mdf rubbish came on stream and where coffins were made to measure out of solid wood. Not this factory built rubbish that is supplied today
Not bad...I am building my own coffin (yes my own one!!)., I am using 12mm plywood, outside is painted rich cedar wood sheen.
Thank you my dad's funeral was last week just wondering behind the seance thank you 😔
My belovéd Granny died on 19 November 1982. The family were not asked about the interior upholstery, so she was buried in a powder-blue arrangement. I remember this until today in 2023.....The blue colour was superb, and much better than deathly white! ❤
Great video! This makes me miss being an FSO! I used to enjoy lining coffins and putting those nails around the sides.. the finishing touches.
Why do the coffins come unfinished? And why is it the funeral directors responsibility to finish them?? Is that a cultural or traditional practice? Here in America we purchase caskets ready made and all of the personalizations are manufactured prior to arrival… Always been curious about this.
Mantap keren banget 🙏🙏🙏👍 Tengkiu Selamat Siang
plastic sheet does it stop water getting in?
If you are being buried, why would you really want to bother about water getting into the coffin? Are you likely to wake up 4ft under the earth and tell the world "theres a leak in my coffin"???
DOES ANYONE REALLY CARE??? YOU ARE DEAD !!!
Are coffin handles purely decorative or are they used in the lifting process? I say yes they are, my friend says no they are not used!
knew most of it, great teacher !!!! thanks
What type of lid closures are those? What should I be searching for to find them.
bell tops from coffin factroy
I've just sent off an application to work in making coffins - fingers crossed I get an interview. I think this would be a very interesting and important industry to be a part of.
did you get the job ?
Thank goodness I’ve built my own solid oak coffin, I’m in my 70’s so could be moving in soon. No way would I wish to be laid in chipboard coffin. Probably ok if you want a cremation, I’m going in ground so want something a bit more substantial.
good for you love to see a pic
What colour have you painted the exterior?
Can you explain how lead lined coffins are made and sealed? Like the one the Queen is in. DO they use a torch to seal the lead sheeting? Must be heavy.
this be a good ider for a vido i get this done soon
Can you do a video regarding lead lined coffins? thank you
this is a good idea i will do one soon
Lead lined - is that to stop the dead body from making a phone call???
What is the measurements pls
How Many Coffins do you keep on hand for funerals before you receive the death call?
we have about 30 in stock at all times
Thanks
How much would a coffin like this be
our veneered coffins are £95
solid wood £250. prices as of 15/04/2021
@@countyfuneralsAre there options available for pre-need shipping to the United States?
Thanks for the video.
You are welcome!
Comfy?! Have your clients ever complained?
nope
Your Country’s Funeral workers and Directors definitely do more of the work than the US does. Seems like this wouldn’t be
as less costly and more fit for cremation. I think many American would fall right though ot snap the four handles. US wood casket usually average abou 200+ or - pounds empty.. Yikes were are an overweight Country
I’ve spent more on Halloween props than this actual coffin costs.
❤
😊😢
what a mess, that must be the worst trimmed coffin i've ever seen, would you like to be shown how to trim one properly.
And yes the handles are ornamental, but they also guarantee them upto 20-25 stone in weight aswell.
Thanks your comments are very welcome you are more then welcome to come and trim a coffin
i must admit it not my best work thanks for the note about the handles but the one we use are only ornamental i know you can get load bearing handles
i am sorry iv our little video has upset you we just trying to get our custmers better informond on solid v foil coffin choice
grant
Why bother with trimming - would you not simply just put a sleeping bag in the coffin?? It does not need to be fancy - its going in the ground!!
Would you let us see a body and get permission from a family
it is not aloud on you tube
@@countyfunerals I dont see why, as long as you prove to them that you have permission and say its for educational purposes. Institute of human anatomy on here does with preserved ones
Why would anyone want to see a dead body lying in its coffin??? Thats sort of gross - do you expect the woman to look fabulous or the guy to look handsome?? GET A LIFE.
He who's head is in heaven,need not fear to put his feet into the grave
Good saying.......but be very careful about been presumptuous re your spiritual standing.......
I really don't like those six-sided anthropoid coffins and much prefer the look of the rectangular caskets.
are you from the usa ?
@@countyfunerals No, I'm from the UK.
My coffin is a toe pincher and looks fabulous...
There in the ground why do thy need all that
A wise comment !!
0”9
Not once of all the years I was a funeral director would I allow a cardboard box be allowed for a pillow. That’s a total disgrace and your coffin trim and side sheets are awful and the breast plate should be 21 inches from the top edge of the lid. If you can’t get it right then get out of the trade. I started my career back in the 60s before this chipboard and mdf rubbish came on stream and where coffins were made to measure out of solid wood. Not this factory built rubbish that is supplied today
thanks for you comment hope your kepping well
You should see my coffin - 12mm plywood and its just as good looking as any other one.
Wood handles so a stave away from simulation and symbolicism ?.. Depopulate
I need a REAL pillow and the bottom slightly wider, just so my knees are not touching. The religious symbol will be brass.
You want a real pillow??? why - you wont know any diference when you are buried??
@@steviemacmuttley Won't know till we get there now will we?
why do you guys over there make things very cheap-looking?
Can i get your email?
grant@countyfunerals.co.uk. thanks