1967 Chrysler 6hp Motor Running 6702

Поділитися
Вставка
  • Опубліковано 12 гру 2024
  • My freshly repaired 1967 Chrysler 6hp motor running.
    Not running really well right now, but I will be further tuning it and it should be better.

КОМЕНТАРІ • 5

  • @markyzrmb
    @markyzrmb  14 років тому

    Thanks for the tip griggsb, I actually cleaned and tuned the carb last year and now it runs like a champ. Yes it was running a tad lean, it's running a bit richer now so the stumble is gone.

  • @markyzrmb
    @markyzrmb  13 років тому

    @duckmantips The model number is 6702. On the front of mine there is an adjustment knob that is marked "idle". The choke is on one side of the starter pull and the idle adjustment is on the other. If you don't have this knob you'll have to find the idle adjustment screw on the carb itself, it should be on the bottom and marked.

  • @markyzrmb
    @markyzrmb  14 років тому

    Note the descirption "not running well right now". And yes, after some tuning, and a new impeller, it purrs like a kitten.

  • @griggsb
    @griggsb 14 років тому

    Try turning idle adjustment screw to the left a bit. Sounds like it is a little bit lean. That's what causes that stumble. Good luck.

  • @Paulsmarinesalvage
    @Paulsmarinesalvage 15 років тому

    sounds like garbage. ever get it running right?