very nice, personally i would’ve preheated the engine, out carb back to factory settings, and let the engine idle for a minute before revving. then tune from there for more smoother low end and higher top end
It's a novarossi .21, they have great parts support but I don't know if their current listed piston sleeve kits match the late 90s models, don't have the part # committed to memory.
Did you put after run oil in it before shelving it, and if so, what kind? I used hobbico's with mine, and the engines were sludged up after only 12 years in storage, wouldn't start.
after run oil is a myth so you buy these stupid tiny bottle with liquid gold to prevent engine sludging, seizing and rust.. most engines sludge up, seize and rust AFTER run oil. use DW40 or engine transmission fluid OR even better use 2 stroke oil like i do. every after run oil i have tryed (and ive tried almost all of them) leave a sticky substance as if it came from the factory like new, but it isnt new.. after run oil mixes with burnt fuel, nitro and other by products that where produced in the combustion cycle but doesn't break it down, it 'seals' them. and so what happens is, this stupid little bottle of gold makes it worse. WD40 is a water displacement not a lube, it is also an oil thinner, so what happens is, your engine wont seize or sludge up however it is NOT a protection against rust. 2 stroke oil is an alround great performing 'after run' oil, it keeps the engine healthy and clean, prevents most rust, the downside is that the next startup after storage can take a little longer but it usually fires up without hiccups.
I ran the fuel out and put this stuff called duralube in the engine...then a sealed ziplock bag and stuck it in the closet. Looked just like the day, I put it there lol I put fresh fuel down the carb and let it started up 👍
Serpent king of RC, what a memory
Had an Impact when I was about 17 (27 yrs ago 😩) feckin awesome piece of kit, that engine note brings back memories
Au top !!!!
I can smell this video, an it smells gooddd!
That is not a serpent vector, but a serpent excel spec 95!.
very nice, personally i would’ve preheated the engine, out carb back to factory settings, and let the engine idle for a minute before revving. then tune from there for more smoother low end and higher top end
Wow I love it
It's a SERPENT EXCEL, no VECTOR... 😉
Yea, I had Vector. It is not purple upper deck and the shocks is not like that. it should be Excel
@@smashrc123 Hello, IT IS (not should be 😉... ) an Excel Serpent (9000 series).
@@kikiautorcman787B yea. Correct.
Definitely look’s like an excel! I have the 993 excel but with carbon upper plate, still have the original purple one too
@@needmoreboost6369 Yes, it's an Excel Serpent... 😉‼️💯🔥🛢️🏁🏎️🤓🇨🇵
Awesome car. I have a Serpent Vector NT but mine is a little different looking than yours.
Nice
That thing sounds like its doing all it can too stay on LOL
😍
hate those cross screws.
Too rich in The low speed. You can tell it obviously when The sound is like The engine is drowning.
Igual ao meu
Bom dia amigo encontro esse pneu pra vomprar
Nice what motor is that can you still get pistions for it
It's a novarossi .21, they have great parts support but I don't know if their current listed piston sleeve kits match the late 90s models, don't have the part # committed to memory.
Savage
engine mega tls !!! and its not excel serpent ?
Hi bro
Did you put after run oil in it before shelving it, and if so, what kind? I used hobbico's with mine, and the engines were sludged up after only 12 years in storage, wouldn't start.
after run oil is a myth so you buy these stupid tiny bottle with liquid gold to prevent engine sludging, seizing and rust.. most engines sludge up, seize and rust AFTER run oil.
use DW40 or engine transmission fluid OR even better use 2 stroke oil like i do.
every after run oil i have tryed (and ive tried almost all of them) leave a sticky substance as if it came from the factory like new, but it isnt new..
after run oil mixes with burnt fuel, nitro and other by products that where produced in the combustion cycle but doesn't break it down, it 'seals' them.
and so what happens is, this stupid little bottle of gold makes it worse.
WD40 is a water displacement not a lube, it is also an oil thinner, so what happens is, your engine wont seize or sludge up however it is NOT a protection against rust.
2 stroke oil is an alround great performing 'after run' oil, it keeps the engine healthy and clean, prevents most rust, the downside is that the next startup after storage can take a little longer but it usually fires up without hiccups.
I ran the fuel out and put this stuff called duralube in the engine...then a sealed ziplock bag and stuck it in the closet.
Looked just like the day, I put it there lol
I put fresh fuel down the carb and let it started up 👍
Comprar
its a excel form 1992 not a vector
That is a Serpent Mk2, not a Vector.
Excel Mk2
fucking loud tho
Actually it's too lean on the top, all good though I love those cars!
No air filter, poor engine.
That’s a excel not a vector
Not Vector.
Excele !!