For countries outside of the USA who can no longer purchase for shipping to their country due to EU regulations, Medicube products are available with *FREE shipping* to countries around the world tjtutorials.com/get-medicube-age-r-devices-with-free-worldwide-shipping/ A minimal purchase amount of approx. $70 USD is required for free shipping, wit express delivery options, discounts, and regular price drops. Plus, using the links or promo code *TJTUTOR1ALS* on my website automatically deducts a further 10% of the advertised price! AMAZING! For THE USA, Canada, and Brazil, you can still order direct from Medicube US.
You are probably the best person to answer this question if this produce hair loss. Does it decrease the amount of your facial hair or it grows back? I read the burning smell is due to the removal of face fuzz but it does not indicate it removes hair. Does it cause receding hairline or thinning of eyebrows?
Thankyou, all the other modes made sense except for airshot mode. I was so lost on how to use this mode. the instructuions never said whether or not it needs to hover ot touch the skin lolol
Thank you for the thorough. review. I appreciate it a lot. My product came today and I couldn’t be happier. My concern, however is when I tried using the air mode it’s a bit painful and yes you are right there’s that little burnt smell. And I only used level one for it but that needlelike thing is a bit painful and any suggestions for the pain?
It can, but you don't want the whole tip flat on the skin. Touch it to the skin, then raise one side a few millimetres so only one edge is touching. Then start moving it.
Thanks for your question! 😊 For airshot mode, no cream is needed since the device is positioned 1-2mm above the skin and doesn't require direct contact or gliding. How are you finding the treatment so far?
The Booster Pro helps enhance the microcurrent effects and boosts product penetration, which can complement the results from microneedling. However, it’s not as effective as traditional microneedling for deep collagen stimulation. It’s more about improving the overall effectiveness of your routine, rather than replacing the need for microneedling.
@@angelascott4073 this is definitely my favourite device by far. I still use my ZIIP alongside it, but it's not absolutely necessary as the Booster Pro has got microcurrent built in.
@angelascott4073 I have. I actually have a video in progress with it. 😊 It's basically RF and EMS (which are great) while the booster pro is Electroporation, Microcurrent, EMS, and electric microneedling. They are quite different devices with different functions.
Hello! I just bought this device after watching your videos. I was wondering how I should use it with my tretinoin cream because i use that everynight.
Hi. I to use tret on my upper cheeks (mainly to control acne flare-ups there). The way I do it is to use the device first, then apply my tret immediately after finishing. I've also done it where I apply the tret and wait an hour before using the booster Pro. Both work well, but it depends if I have an hour to spare to wait for the tret to soak in before using the booster.
Hello! Just bought this. I know you said you’re just “hovering above the skin” but it looks like you are still touching your skin…is there supposed to be any skin contact when doing this step? I have rewatched this part of the video so many times, even zoomed in and it does look like you are touching your skin…help! 😂 thanks!!!!❤
Thanks for the question! 😊 Yes, I do use it on my hands to keep them looking smooth and youthful! As for the back, not so much - my arms aren't quite that flexible either! 😂 But if you have someone to help or can reach certain areas comfortably, it could be worth a try! Do you have any spots you’re thinking about treating?
Awesome video, these devices are so interesting. Your skin is looking great btw. You look very tan in comparison to usual. As someone super pale can you give me your secret lol, are you using a fake tan product? I’ve tried using them in the past but they are always orange on me. Great video as usual!
I got concerned when I tried this on my eyelids because I noticed the light is very bright. It reminded me of the IPL I get on my eyelids for treating my meibomian gland dysfunction. I get lenses inserted in my eyes prior to treatment to protect the eyes from the light. Do you know if the light is safe for our eyes and vision?
I don't think you're supposed to use it on your eyelids? If you watch the tutorial videos by medicube themselves they never use the device on the models eyelids
@@melissadenise4138 you can use the Booster mode on the eyelids. They even demonstrate in one of the their video tutorials for the Booster-H. They recommend using the lower levels for the eyelids.
I've done some research on AirShot mode. I contacted the company and they said NOT to use it on areas that have facial hair because it can remove hair. Can you or anyone comment on this? I have a beard and I'm really worried to use this or any other of the modes. Does anyone know if the other modes also remove hair?
For countries outside of the USA who can no longer purchase for shipping to their country due to EU regulations, Medicube products are available with *FREE shipping* to countries around the world tjtutorials.com/get-medicube-age-r-devices-with-free-worldwide-shipping/
A minimal purchase amount of approx. $70 USD is required for free shipping, wit express delivery options, discounts, and regular price drops. Plus, using the links or promo code *TJTUTOR1ALS* on my website automatically deducts a further 10% of the advertised price! AMAZING!
For THE USA, Canada, and Brazil, you can still order direct from Medicube US.
You are probably the best person to answer this question if this produce hair loss. Does it decrease the amount of your facial hair or it grows back? I read the burning smell is due to the removal of face fuzz but it does not indicate it removes hair. Does it cause receding hairline or thinning of eyebrows?
Hi. It definitely removes fine peach fuzz hairs. I've not noticed and loss on the brows or thicker hairs.
Can we use it on hair for hair to regrow like micro needling?
Thank you so much for doing this very helpful video ❤❤❤❤❤
Thankyou, all the other modes made sense except for airshot mode. I was so lost on how to use this mode. the instructuions never said whether or not it needs to hover ot touch the skin lolol
Thank you for the thorough. review. I appreciate it a lot. My product came today and I couldn’t be happier. My concern, however is when I tried using the air mode it’s a bit painful and yes you are right there’s that little burnt smell. And I only used level one for it but that needlelike thing is a bit painful and any suggestions for the pain?
@@Melissathursday hi. Any update? How did you deal with the pain?
I just want to clairify what you mean when you say that you hover it above the skin. Does that mean that it doesn't touch the skin at all?
It can, but you don't want the whole tip flat on the skin. Touch it to the skin, then raise one side a few millimetres so only one edge is touching. Then start moving it.
@@TJTutorials Got it. Thank you so much!
Hi TJ, thank you very much for the very informative video, how come it only flashes at the start then the flash stopped? thanks
And this is the best series of how to hide this!
I just got the device and can’t even do level 1 of the air shot because it’s so painful 😢 I’m too scared to try further. Any suggestions?
Is that Numbuzin 3 essence?
did you use any cream on your skin with the instrument for glide? thanks
Thanks for your question! 😊 For airshot mode, no cream is needed since the device is positioned 1-2mm above the skin and doesn't require direct contact or gliding. How are you finding the treatment so far?
May I ask do you use toner before the airshot mode or after ?
curious, if you're already microneedling/nanoneedling at home, would this actually provide any benefit, or would it just be redundant?
The Booster Pro helps enhance the microcurrent effects and boosts product penetration, which can complement the results from microneedling. However, it’s not as effective as traditional microneedling for deep collagen stimulation. It’s more about improving the overall effectiveness of your routine, rather than replacing the need for microneedling.
TJ what do you of the Lyma Laser? Have you done a review on it?
Many thanks .i appreciate.
Hi. I haven't done a review on it yet (I'm still saving to buy one) but fear not, I will get one done soon.
@@TJTutorials thank you for getting back to me. I have just got one a few weeks ago. It’s not a quick fix. I am 74 so it has its work cut out. lol
Do you prefer this or the Amiro Age pro and do you still need Ziip
@@angelascott4073 this is definitely my favourite device by far. I still use my ZIIP alongside it, but it's not absolutely necessary as the Booster Pro has got microcurrent built in.
Have you tried the Amiro
Thanks
@angelascott4073 I have. I actually have a video in progress with it. 😊 It's basically RF and EMS (which are great) while the booster pro is Electroporation, Microcurrent, EMS, and electric microneedling. They are quite different devices with different functions.
Does the air shot mode work like a microneedle pen or roller??
Exactly like that, only minus the needles 😊
What about for ppl who have Botox? Are all the options safe and won’t decrease the results of Botox?
@@FrenchTipsAndFrenchies I have Botox and zero issues.
@ thank you! Your tutorials have been so helpful 🫶🏽
How often do you use this?
I use this mode twice a week. 😊
Hello! I just bought this device after watching your videos. I was wondering how I should use it with my tretinoin cream because i use that everynight.
Hi. I to use tret on my upper cheeks (mainly to control acne flare-ups there). The way I do it is to use the device first, then apply my tret immediately after finishing. I've also done it where I apply the tret and wait an hour before using the booster Pro. Both work well, but it depends if I have an hour to spare to wait for the tret to soak in before using the booster.
@@TJTutorials thank you so much for your reply! Love your videos :)
Hello! Just bought this. I know you said you’re just “hovering above the skin” but it looks like you are still touching your skin…is there supposed to be any skin contact when doing this step? I have rewatched this part of the video so many times, even zoomed in and it does look like you are touching your skin…help! 😂 thanks!!!!❤
Hi. Yes, it's partially touching the skin (just one side at around a 45 degree angle)
what should we apply just after this mode ?
Great question! After this mode, you should apply your preferred serums and moisturizers to lock in hydration and maximize the benefits. 🌿
Do you use it on hands and feet? and back ?
Thanks for the question! 😊 Yes, I do use it on my hands to keep them looking smooth and youthful! As for the back, not so much - my arms aren't quite that flexible either! 😂 But if you have someone to help or can reach certain areas comfortably, it could be worth a try! Do you have any spots you’re thinking about treating?
Awesome video, these devices are so interesting. Your skin is looking great btw. You look very tan in comparison to usual. As someone super pale can you give me your secret lol, are you using a fake tan product? I’ve tried using them in the past but they are always orange on me. Great video as usual!
Thank you 😊 I've been using Bondi Sands Medium. First tan I've found that's not orange on me too. Haha
I got concerned when I tried this on my eyelids because I noticed the light is very bright. It reminded me of the IPL I get on my eyelids for treating my meibomian gland dysfunction. I get lenses inserted in my eyes prior to treatment to protect the eyes from the light. Do you know if the light is safe for our eyes and vision?
I don't think you're supposed to use it on your eyelids? If you watch the tutorial videos by medicube themselves they never use the device on the models eyelids
@@melissadenise4138 you can use the Booster mode on the eyelids. They even demonstrate in one of the their video tutorials for the Booster-H. They recommend using the lower levels for the eyelids.
@@melissadenise4138 6:20 TJ demonstrates using the microcurrent mode on the eyelids here. He lowers it to level one for the eyelids.
How is this different from the Booster mode??
No app in Italy😢
The company has said they are looking at a global App release in the very near future and are currently working on it. 😁
App is not really doing anything you have all the controls in the device I find app very confusing and distracting lol
I find the app super helpful, especially for looking back at my treatment record 😁 Each to their own though.
I've done some research on AirShot mode. I contacted the company and they said NOT to use it on areas that have facial hair because it can remove hair. Can you or anyone comment on this? I have a beard and I'm really worried to use this or any other of the modes. Does anyone know if the other modes also remove hair?
Hi. It definitely removes peach fuzz hairs, but I've gone over my brows and side burns and the thicker hairs aren't removed. :)
Do you use this mode on clean dry skin? Or can you use certain products?
I use this on clean and dry skin, then apply products immediately after I'm done with it. 😁