Wash Your Ride Like A Pro! - Big Mouth Max Release Foam Cannon: bit.ly/3Y2HF8f - Total Extract Tire and Rubber Cleaner: bit.ly/44VVasC - HydroSpeed: bit.ly/44WSxGP - HydroShield: bit.ly/44CfOOJ
I'm in s.e. texas. It's over 100 degrees here. If I foam the whole vehicle by the time I get my mitt, the foam will be all gone. And the vehicle will be dry to the touch. I have to do it in sections and keep the vehicle wet while I'm doing the rest of the vehicle.
@@CarlosReyes-xm7rp guys I can't even pull it into the garage. It would be dry and spotty. Lol. Unreal. If I had some kinda cover it would be a lot bette.
All of you complaining about heat down south, its hot everywhere this time if year. Its all about your technique/process AND products you use. All the complaints about water spots clearly didn't hear the part about using the detail/wax/ceramic sprays to use after the wash to solve that AND add protection to make it easier next time. Learn to listen and read the label/instructions. Would solve a lot of your problems and take a lot of hate off of Chemical Guys products. Fault is always the user and not the product!!!!
So....if i were to apply a polish, glaze, sealant, and wax....i wouldn't want to use the ceramic detailer after a wash correct? I would pull it into a garage and use a drying agent....right?
I did a co-workers car last week with your products and it came out amazing. I got it in bad shape with baked on water spots on the rear bumper and just very dirty. Wish I could show you guys.
@@ChemicalGuys you can use my car if you want 😆 , it’s a black 2023 Sonata N-Line night edition. I don’t have access to a garage so some great tips and suggestions to wax and buff outside would be great!
Hey! This wand is included with the PM2000 ProFlow Pressure Washer. www.chemicalguys.com/proflow-pm2000-performance-electric-pressure-washer/EQP408.html
@@ChemicalGuys ... I don't think you get it Chemical Guys. Texas resident here. It's never cool to the touch in Texas. It's 105+ in the day, 90 degrees at night. Hahaha
Hey Chemical Guys, are you using deionized water where after the car is baked under the sun, no water spots?!?! Your washing this car at one of your Detail Garage, so it’s easy to assume that you are…
As a person that's been detailing cars since the early 90's, you should never ever wash a car in the sun!!! It damages the paint, any real detailer or true car guru knows this!!!
Hi when you are looking them up look for alike and there logo will be right there just tap it and you can do it that way or and if you just write one in the comment section right then they will get back with you.
Wash Your Ride Like A Pro!
- Big Mouth Max Release Foam Cannon:
bit.ly/3Y2HF8f
- Total Extract Tire and Rubber Cleaner:
bit.ly/44VVasC
- HydroSpeed:
bit.ly/44WSxGP
- HydroShield:
bit.ly/44CfOOJ
I'm in s.e. texas. It's over 100 degrees here. If I foam the whole vehicle by the time I get my mitt, the foam will be all gone. And the vehicle will be dry to the touch. I have to do it in sections and keep the vehicle wet while I'm doing the rest of the vehicle.
I'm in TN. Simular problem so I hear ya. Had to wash and quickly pull into garage to dry off and wax
ive had to have my little nephew keep the truck wet while i wipe down the foam lmfao cleaning in the summer sucks
@@CarlosReyes-xm7rp guys I can't even pull it into the garage. It would be dry and spotty. Lol. Unreal. If I had some kinda cover it would be a lot bette.
I'm in AZ it's been over 115 degrees for 26 days straight with no rain since March 🥵
These videos are cute. For people who are actually hustling in the real heat. We know this ain't right
All of you complaining about heat down south, its hot everywhere this time if year. Its all about your technique/process AND products you use. All the complaints about water spots clearly didn't hear the part about using the detail/wax/ceramic sprays to use after the wash to solve that AND add protection to make it easier next time. Learn to listen and read the label/instructions. Would solve a lot of your problems and take a lot of hate off of Chemical Guys products. Fault is always the user and not the product!!!!
Awesome video! I’m so glad yall made a video about washing outdoors in the sun !!
Glad you liked it!!
Simple keep the vehicle cool with wetting it or washing sections at a time.
Happy detailing!
So....if i were to apply a polish, glaze, sealant, and wax....i wouldn't want to use the ceramic detailer after a wash correct? I would pull it into a garage and use a drying agent....right?
What do you recommend using for the black plastic trim panels ?
I did a co-workers car last week with your products and it came out amazing. I got it in bad shape with baked on water spots on the rear bumper and just very dirty. Wish I could show you guys.
Is there a possibility of water marks if you use DI water?
Do you use the drying towel for door jambs as well? Didn’t see you open any doors and there would be a load of water waiting in there.
Killer video!!
Glad you enjoyed the video!!
Wish you were in Orlando and you could make a video doing paint correction on my Tesla, I’m worried I’ll make it worse somehow if I try myself haha
Green tip is okay to use? I only have used white
Absolutely!
The real question is this hard or soft water?
Awesome video! Is there one on how to wax and buff outside?
Great suggestion!
@@ChemicalGuys you can use my car if you want 😆 , it’s a black 2023 Sonata N-Line night edition. I don’t have access to a garage so some great tips and suggestions to wax and buff outside would be great!
what about water spots????
Where’d you get that wand from?
Hey! This wand is included with the PM2000 ProFlow Pressure Washer.
www.chemicalguys.com/proflow-pm2000-performance-electric-pressure-washer/EQP408.html
What presser washer do you guess use ?
Hey! Check out the PM2000 ProFlow Pressure Washer!
www.chemicalguys.com/proflow-pm2000-performance-electric-pressure-washer/EQP408.html
It would have been good to show how to wash on a hot day. No way you can do a whole car in real heat like that.
This guy is awesome, more videos please ! 🔥
Glad you enjoyed the video!!
Living in texas, I can never dry my black truck without streak marks..
Hey! Try washing when the surface is cool to the touch to reduce streaks and water spots.
@@ChemicalGuys ... I don't think you get it Chemical Guys. Texas resident here. It's never cool to the touch in Texas. It's 105+ in the day, 90 degrees at night. Hahaha
Hey Chemical Guys, are you using deionized water where after the car is baked under the sun, no water spots?!?!
Your washing this car at one of your Detail Garage, so it’s easy to assume that you are…
Good job
Happy detailing!
@@ChemicalGuys
Thank you
Will you do a winter wash /going into fall /winer?.
@@ChemicalGuys you to and what are you coming up with next 🤔 👀
@@ChemicalGuys oh p.s. what would you recommend from 1-12 from start too finish 🤔 I have some to rents with but one to twelve thank you.
that car needs a polish saw lotta swirl marks
Thanks so much for watching!
As a person that's been detailing cars since the early 90's, you should never ever wash a car in the sun!!! It damages the paint, any real detailer or true car guru knows this!!!
Not bad a lot of rookie mistakes need Joey and Henry for backup and please take your time talking (too fast) overall not bad
Thanks so much for watching!
👍🏼👍🏼👍🏼👍🏼👍🏼👌🏼😎
🤩
Bro...Great video but don't ever do the sounds effects again. LOL...was funny!
😄😄
👍👍👍👍👍👍👍
Happy detailing!
Elon likes to clean his wheels with Diablo, while playing Diablo, while on Spaces. 🥴
Happy detailing!
Does anyone how to contact chemical guys now? I’ve tried to contact them on Facebook Instagram, but I never get a reply. and I’m the biggest fan.
Hey! Please contact our Customer Service team for assistance.
www.chemicalguys.com/sfcc-contact-us.html
@@ChemicalGuys ok thank you
Hi when you are looking them up look for alike and there logo will be right there just tap it and you can do it that way or and if you just write one in the comment section right then they will get back with you.