Few Critiques: 1. Shape matters. The more angular a force the more it can turn it's rotational kinetic energy into a linear force on the opponent. You need a shape actually suited to provide big hits, unlike CobaltDragoon which is too round to do it. 2. Heavier = Better. Don't try to balance it like that. Yes, heavier can make you go slightly slower, but in overall force it is completely counteracted by mass having a direct influence on the force. The reason why heavies move less is because they add to the force of friction slowing the beyblade down. But from what we all know about rubber tips, friction is actually GOOD for attack. Long story short, more friction means you can transfer that rotational energy into the opponent better. 3. Spin Speeds are not influenced by weight distribution. The only thing weight distribution will do is determine momentum, which is always better to be higher. On the X-rail, the only thing that influences speed is the gear ratio and spin speeds, neither of which are influenced by weight distribution. In truth, the only thing a high-weight distribution will do is give you more momentum to 'use up' in an X-Dash, meaning you'll have more momentum to work with when getting off (aka higher spin speeds). That's part of why RhinoHorn just dies after a single X-Dash. There was some talk of Inward Weight Distribution increasing initial spin speeds, but that's kinda a farce. Truth is, IWD just makes it EASIER to spin something, and OWD means you have to put more effort into spinning it. They both have a cap though, so if you have a strong enough launch it'll be the same regardless. 4. Bit choice is weird. You don't need more hits, you just need to hit ONCE with maximum force for the premise of this video. Accel, Level, and Rubber Accel are the best so you get as much acceleration on the X-Line as possible for that one big hit. Yeah, conserving stamina is 'better', but when you aim to maximize force it doesn't matter if you win or lose. In terms of Blades, consider SharkEdge, WhaleWave, PhoenixWing, and DranBuster. They all have good weights and shapes, so just see which one hits the hardest I guess. In terms of Bits, Accel, Rubber Accel, and Level. Level conserves stamina while having MAXIMUM X-Dash capabilities, Accel is kinda a baseline, and Rubber Accel is optimal if you manage to launch well enough to get the immediate X-Dash. Try them all out on whatever Blade you decide. As for Ratchet, 7-60 or 7-70 is best, you want max weight for more force, the height you choose depends on what you find makes the blade hit hardest.
Dragoon is also real off balance though, it has more metal on two of its four blades, shifting its weight to one half the body and moving the centre of gravity outside of the bey itself in most combos. Just look at the 4 metal holes in its underside, two are mostly filled in whereas the other two are hollow. Cobalt drake is also the same in this.
Yeahhhh dragoon don't got the best stamina too, which is why a tip like elevate really makes it a viable meta blade. I was never too fond of the dragoon point combo, but alas the allure of left spin has led me here.
Yaknow After watching this video AND Reading the comments 1 Very very VERY Important piece to this Equation that everyone is leaving out is that If you want MAXIMUM Speed for Full Force Gear Flat is Literally designed to shove A lot of power from an Extreme dash and yet (from what I've read) Literally No one mentioned it not even the guy with the super huge Paragraph. just thought I would mention it cause Me personally when I think of the Fastest Bits Gear Flat is at the top
I've got a question. I was thinking ... since Unicorn Sting has two different opposite blades, it feels kinda like Deathscyther from Beyblade burst. Can we somehow: 1. Replicate and or make a better version of Deathscyther using Unicorn Sting 2. Make a great counterattack Bey using that blade, a 1-60 or a balanced ratchet, and a bit like Hexa?
I think using a slightly lighter combo would allow the bey to hit the x rail more often as when it hits the orher bey its more likely to knock out to outer ridges. If you're using a heavier bey, you should experiment with a taller ratchet. 5-80 or something might work better?
@@MBBCMonashBeybladeBattlingClub I'm fairly new to the X scene so I'm not too in the know but from a logical standpoint I feel like there is a point of diminishing returns with bey's. You can be atk/Def/stamina oriented but there is a point where the changes make less and less difference. Based on that theory, as you've already provided an optimal blade and bit; a ratchet that focuses on a other area might provide more overall benefit to the bey. I might be completely off though! Also, I didn't say it the first comment but I completely get the aim was to get the most force and it's a great video, my comment was more geared to the battles at the end. I'm going to go through the rest of your stuff as it's a great format. Please keep up the good video content and provide updates if you do test out the different ratchets!
Also I believe when discussing height Vs aerodynamics there are some nuances. I'm no science expert but more mass tends to decrease acceleration. Therefore, if you're running a quick win bey it would be more beneficial to be light however a heavier bey that manages to get running would likely have a stronger X dash if it manages to get on the rail thanks to the additional weight. I haven't done the testing but I believe the taller ratchets are heavier?
I love your videos and science you've been putting behind your builds. It especially helps since I just found out two weeks from today my card shop will be hosting a bey tournament. So far I've locked in Wizard Rod 9-60B and Phoenix Wing 3-60R. Need to figure out if I want to bring a Dragoon or Wolf build. 🤔
Problem with this: Acceleration is not the same as Velocity (Acceleration = change in Velocity). How can you be sure that the moment your Bey leaves the Xtreme Line that it's going at its highest Acceleration and not in a state of deceleration?
Can you please make combos for the "bsf bays" Like Horn rhino Yell kong Tusk Mammoth Savage bear Etc Please i now whit the correcto parts this beys can make a Lot of damage to the "meta" Please
I just got my impact drake and cobalt dragoon yesterday, and remembered I was gonna put taper on it, so currently, I tried 9-60 taper on dragoon,and damn it hits good against whale wave 5-60 low rush, what other attack CDragoon combos would you recommend? Also, I'm using 1-60 Level on my impact, is it viable?
@MBBCMonashBeybladeBattlingClub the thing is, I don't have Elevate 😭😭 and ngl I want to use an attack combo on cobalt for fun (ive bought 4 whale wave random boosters, and for the first 2, i got the black whale wave, then the other 2, the white waves, AND THEY ARE THE SAME MOLD NUMBERS)
@MBBCMonashBeybladeBattlingClub the best launch for Me for my Impact Drake combo is to angle launch it slightly, (I'm currently using the hold launcher for it) and to relax first before launching
You decided on BevenomGlue (CobaltDragoon 5-70 T [replacing 5-70 with 7-60)?!! That was my partner bey until I evolved it into BevenomStinger (CobaltDragoon 7-60 R)
Amazing vid brother, i feel like im alone with beyblade, collected them all as a kid had all the stadiums even imported ones from hong kong, i was wondering where do you get your beys from? Once again amazing vidate.
You have to focus more on mass than acceleration, as acceleration is harder to achieve because of that squared time component. For that reason, you should have used 80 rachets.
Haha thanks for the feedback 🙏 what you said all makes sense. However leaning into the weight side really didn't offer much in terms of entertainment, such as the available blades, also the heaviest beyblade combo in X is genuinely bad. Also 80 ratchets on an attack beyblade aren't the best. It would have been a cool experiment to lean into the weight side I agree, but I am trying to make usable combos with these videos
Busy with highschool, forgotten the peakness of beyblade. So we never actually played any burst. One of us was a massive mfb fan and inspired us all to get some mfb beys then that evolved into a channel and eventually getting into X.
While it may not get hard hits, I personally use CD 7-70 Glide as it consistently beats WR and SW in a spin finish, but it will barely get a over finish or extreme
I think a lot of people never got to watch the movie due to it being primarily released in japan Also the moment you said heavy and speed phoenix wing came into mind remembering what burn fujiwara wanted
![How I QUALIFIED For One of the BIGGEST Beyblade X Tournament in the US! [AzBXT] #ベイブレードX](http://i.ytimg.com/vi/tAgHpmprtBg/mqdefault.jpg)
![How I QUALIFIED For One of the BIGGEST Beyblade X Tournament in the US! [AzBXT] #ベイブレードX](/img/tr.png)
forgive the sock 🙏
Timestamps:
00:00 - Introduction
00:28 - Research & Development
03:52 - Testing: Wizard Rod
05:26 - Testing: Leon Crest
06:35 - Testing: Phoenix Wing
07:58 - Testing: Whale Wave
09:18 - Conclusion
Yep in a couple of days people here will be running this combo. Just like Rhino Horn 3-60 L.
Thanks for the kind words!
Few Critiques:
1. Shape matters. The more angular a force the more it can turn it's rotational kinetic energy into a linear force on the opponent. You need a shape actually suited to provide big hits, unlike CobaltDragoon which is too round to do it.
2. Heavier = Better. Don't try to balance it like that. Yes, heavier can make you go slightly slower, but in overall force it is completely counteracted by mass having a direct influence on the force. The reason why heavies move less is because they add to the force of friction slowing the beyblade down. But from what we all know about rubber tips, friction is actually GOOD for attack. Long story short, more friction means you can transfer that rotational energy into the opponent better.
3. Spin Speeds are not influenced by weight distribution. The only thing weight distribution will do is determine momentum, which is always better to be higher. On the X-rail, the only thing that influences speed is the gear ratio and spin speeds, neither of which are influenced by weight distribution. In truth, the only thing a high-weight distribution will do is give you more momentum to 'use up' in an X-Dash, meaning you'll have more momentum to work with when getting off (aka higher spin speeds). That's part of why RhinoHorn just dies after a single X-Dash. There was some talk of Inward Weight Distribution increasing initial spin speeds, but that's kinda a farce. Truth is, IWD just makes it EASIER to spin something, and OWD means you have to put more effort into spinning it. They both have a cap though, so if you have a strong enough launch it'll be the same regardless.
4. Bit choice is weird. You don't need more hits, you just need to hit ONCE with maximum force for the premise of this video. Accel, Level, and Rubber Accel are the best so you get as much acceleration on the X-Line as possible for that one big hit. Yeah, conserving stamina is 'better', but when you aim to maximize force it doesn't matter if you win or lose.
In terms of Blades, consider SharkEdge, WhaleWave, PhoenixWing, and DranBuster. They all have good weights and shapes, so just see which one hits the hardest I guess.
In terms of Bits, Accel, Rubber Accel, and Level. Level conserves stamina while having MAXIMUM X-Dash capabilities, Accel is kinda a baseline, and Rubber Accel is optimal if you manage to launch well enough to get the immediate X-Dash. Try them all out on whatever Blade you decide.
As for Ratchet, 7-60 or 7-70 is best, you want max weight for more force, the height you choose depends on what you find makes the blade hit hardest.
Thanks for your response, we'll keep it in mind for next time 💪
holy yap
Mate I feel like I would’ve done a lot better in school if learning was like this 😭
We all do 😭
Every math department should have a full set of Bey parts. Today's project, BB tournament. All need to build a Bey, write a report on it, then battle.
Or college🤷♂️
I really appreciate the science you guys do. Here's a 5 to support the content!
Hahaha thanks for all the support 🙏🙏 more great content coming soon!
This channel is such a mood. Got inspired by your knife shinobi videos that i tested it with my rhino horn. Looking forward to more of your vids :)
Thanks for the support 🙏 glad to know you're giving combos a try, hope you have fun with them! More content coming soon
this video is what a college exam at a beyblade college looks like
Pop quiz coming up 😂
Dragoon is also real off balance though, it has more metal on two of its four blades, shifting its weight to one half the body and moving the centre of gravity outside of the bey itself in most combos. Just look at the 4 metal holes in its underside, two are mostly filled in whereas the other two are hollow.
Cobalt drake is also the same in this.
Yeahhhh dragoon don't got the best stamina too, which is why a tip like elevate really makes it a viable meta blade. I was never too fond of the dragoon point combo, but alas the allure of left spin has led me here.
y'all one of the best beyblade x channels at the moment!
Thank you🙏🏾
Yaknow After watching this video AND Reading the comments 1 Very very VERY Important piece to this Equation that everyone is leaving out is that If you want MAXIMUM Speed for Full Force Gear Flat is Literally designed to shove A lot of power from an Extreme dash and yet (from what I've read) Literally No one mentioned it not even the guy with the super huge Paragraph. just thought I would mention it cause Me personally when I think of the Fastest Bits Gear Flat is at the top
Thanks for the info! Definitely will be considering it for next time 🙏
I NEED a video dedicated to Leon Crest 7-70BS
You see, I'm bit of a theorycrafter myself (half lie)
Hahah it's was pretty good, our respect for Leon crest going up 💪
@@MBBCMonashBeybladeBattlingClub yo bro real quick
What if spike isn't actually bad 🤔
I really wanted to see the dagger test 😢
Guess I have to test myself 😂
Oh well hopefully we can do a part 2 one day!
Make the longest spinning beyblade
Will be hard to dethrone wizard rod but good idea!
You 2 guys have something special!Keep your creativity fresh and you guy’s are going to Blow TF up! Great video my dudes✌🏽
Thanks for the support 🙏, more videos coming soon! Also, we're big fans of your channel, we love your content!
@MBBCMonashBeybladeBattlingClub Thanks my dudes!🙏🏾
My favorite competitive Beyblade X Combo 😮
Haha thank you, It's not the best but it still hits hard 😅
I've got a question. I was thinking ... since Unicorn Sting has two different opposite blades, it feels kinda like Deathscyther from Beyblade burst. Can we somehow:
1. Replicate and or make a better version of Deathscyther using Unicorn Sting
2. Make a great counterattack Bey using that blade, a 1-60 or a balanced ratchet, and a bit like Hexa?
Hmmm sounds like a good idea, will think about it. Unicorn sting is one of my favourite X beys so might have a go
Wait...2:53 you try to put a left spin to a right spin launcher😅
Oops hehe 🤫
I really like this channel.
I feel i can compete in exhibitions/ contests/ or go pro
Haha thanks for the support, have fun blading!
I think using a slightly lighter combo would allow the bey to hit the x rail more often as when it hits the orher bey its more likely to knock out to outer ridges. If you're using a heavier bey, you should experiment with a taller ratchet. 5-80 or something might work better?
Yeahhh wouldn't hurt to try actually, my only fear is that 80 would make the bey too tall and just worsen the aerodynamics
@@MBBCMonashBeybladeBattlingClub I'm fairly new to the X scene so I'm not too in the know but from a logical standpoint I feel like there is a point of diminishing returns with bey's. You can be atk/Def/stamina oriented but there is a point where the changes make less and less difference. Based on that theory, as you've already provided an optimal blade and bit; a ratchet that focuses on a other area might provide more overall benefit to the bey. I might be completely off though! Also, I didn't say it the first comment but I completely get the aim was to get the most force and it's a great video, my comment was more geared to the battles at the end. I'm going to go through the rest of your stuff as it's a great format. Please keep up the good video content and provide updates if you do test out the different ratchets!
Also I believe when discussing height Vs aerodynamics there are some nuances. I'm no science expert but more mass tends to decrease acceleration. Therefore, if you're running a quick win bey it would be more beneficial to be light however a heavier bey that manages to get running would likely have a stronger X dash if it manages to get on the rail thanks to the additional weight. I haven't done the testing but I believe the taller ratchets are heavier?
The gyroscopic effect makes the beys stable so stamina types would be almost immediately crossed out on my list
Yeah makes sense
bro has been popping off
Thanks for the support 🙏 more great beyblade X content on the way!
Dragoon is gonna be insane when that left spin winder drops in April
So true, definitely excited
I love your videos and science you've been putting behind your builds. It especially helps since I just found out two weeks from today my card shop will be hosting a bey tournament. So far I've locked in Wizard Rod 9-60B and Phoenix Wing 3-60R. Need to figure out if I want to bring a Dragoon or Wolf build. 🤔
Hey thanks for the support, more content coming soon! I definitely would suggest dragoon
What parts would you use if you had dran dagger?
Most likely the same parts
And this guy keeps making Op beyblades
Haha thanks for the support, more coming soon 🙏
Problem with this: Acceleration is not the same as Velocity (Acceleration = change in Velocity). How can you be sure that the moment your Bey leaves the Xtreme Line that it's going at its highest Acceleration and not in a state of deceleration?
Haha thanks for the feedback! Will definitely look out for it for the future 💪
Impact drake is gonna be insane, highly disappointed no watermelons were involved!
For the impact drake video watermelons will be harmed
next video: how I made a custom gun shaped launcher for beyblade x so I can turn them into hazardous projectiles
Sounds like an INSANE idea, reminds me of storm Capricorn stuff
Bro where was the watermelon? I wanted to see it penetrate a watermelon
Our thumbnail creator was having too much fun with this one 😭😭
@@MBBCMonashBeybladeBattlingClub
We are owed a fruit destroying video get to work🍉
@@christianguest63 hehe fine fine
cool vid✨
Thanks glad you enjoyed!
Love your content 🎉
I'll try it assembled like this and tag you friend 😊
Haha thanks for the support 🙏 hope you like it! More content to come friend 💪
yk shit gets real when u gotta bring out ap calculus
The only application for it
Honestly, I would like to see a Sol homage in Beyblade X.
would be incredibly cooll
Can you please make combos for the "bsf bays"
Like
Horn rhino
Yell kong
Tusk Mammoth
Savage bear
Etc
Please i now whit the correcto parts this beys can make a Lot of damage to the "meta"
Please
We've made a combo for knife shinobi check it out!
@MBBCMonashBeybladeBattlingClub yes
But i dont think thats going work
On savage bear or horn rhino
They are bigger
Please bro
I just got my impact drake and cobalt dragoon yesterday, and remembered I was gonna put taper on it, so currently, I tried 9-60 taper on dragoon,and damn it hits good against whale wave 5-60 low rush, what other attack CDragoon combos would you recommend? Also, I'm using 1-60 Level on my impact, is it viable?
Obviously cobalt dragoon 1-60/5-60/9-60 elevate, and then you can also use level. Have to test out level on impact but sounds pretty good
@MBBCMonashBeybladeBattlingClub the thing is, I don't have Elevate 😭😭 and ngl I want to use an attack combo on cobalt for fun (ive bought 4 whale wave random boosters, and for the first 2, i got the black whale wave, then the other 2, the white waves, AND THEY ARE THE SAME MOLD NUMBERS)
@MBBCMonashBeybladeBattlingClub the best launch for Me for my Impact Drake combo is to angle launch it slightly, (I'm currently using the hold launcher for it) and to relax first before launching
Can you make the most the ultimate unbreakable beyblade?
We can give it a try!
You decided on BevenomGlue (CobaltDragoon 5-70 T [replacing 5-70 with 7-60)?!!
That was my partner bey until I evolved it into BevenomStinger (CobaltDragoon 7-60 R)
We are a slave to statistics 😔
In my testing, the level bit has had some of the best speed with x dashes.
Yup! Check our our knife shinobi video to see the power 😏
Probably because the 16 teeth bits have the shortest gear ratios which equal better acceleration since the bey acts like a driven gear
@@itz_bahamut3822 yeah, like accel, it doesn’t skip gears on the Xtreme line like other bits
Theory: Gingka Hagane is Tyson Granger's protege.
Real
How does bro have samurai saber but not dran dagger😭
Hehehehe priorities 🤫
Didnt buy it since if you can get the rush bit from somewhere else the drandagger layer is mid unless you are a collector
Amazing vid brother, i feel like im alone with beyblade, collected them all as a kid had all the stadiums even imported ones from hong kong, i was wondering where do you get your beys from? Once again amazing vidate.
Thank you🙏🏾
We usually get X beys from SURUGAYA and Amazon.
For MFB beys either eBay/fb lots or 818 beyblade store on Aliexpress
You have to focus more on mass than acceleration, as acceleration is harder to achieve because of that squared time component. For that reason, you should have used 80 rachets.
Haha thanks for the feedback 🙏 what you said all makes sense. However leaning into the weight side really didn't offer much in terms of entertainment, such as the available blades, also the heaviest beyblade combo in X is genuinely bad. Also 80 ratchets on an attack beyblade aren't the best. It would have been a cool experiment to lean into the weight side I agree, but I am trying to make usable combos with these videos
@MBBCMonashBeybladeBattlingClub are we making usable combos or are we trying to destroy meteors? Haha just kidding. Great content nonetheless
@@CesarRodriguez-ht9oi oh ur right. we are trying to destroy meteors 🙈🙈 cant let the authorities know tho
we need fastest bey vs strongest bey
Fr would be epic battle
I want Fastest Beyblade vs hardest hitter
Sounds peak
2:00 TyrannoBeat doesn't have an imbalance
It does but it can actually be circumvented by 2-60 (yes! Tyranno Beat is the only blade to use 2-60 well)
@MBBCMonashBeybladeBattlingClub i use 2-60 on it
It’s so HARD
Fr
Metal fight gen was top notch
Was absolutely peak and unmatched
cobalt dragoon. doesnt work exactly because it is a spin equalisation bey..
Yeah waiting for a better left spin release
where were u when burst was out😅😅😂😂😂
Busy with highschool, forgotten the peakness of beyblade. So we never actually played any burst. One of us was a massive mfb fan and inspired us all to get some mfb beys then that evolved into a channel and eventually getting into X.
@MBBCMonashBeybladeBattlingClub im glad ur making videos like these! finally someone who can able to understand the science and beys s little better
Rule of thumb: If it doesn’t beat rod, it doesn’t work.
While it may not get hard hits, I personally use CD 7-70 Glide as it consistently beats WR and SW in a spin finish, but it will barely get a over finish or extreme
Yeahhhh that's why elevate the best on dragoon
@@MBBCMonashBeybladeBattlingClub No 7-70 glide is go test it
Fwack these are entertaining
Thanks for the support 🙏, more coming soon!
I think a lot of people never got to watch the movie due to it being primarily released in japan
Also the moment you said heavy and speed phoenix wing came into mind remembering what burn fujiwara wanted
Made me laugh, metal fight is filled with insane moments 😭 (what makes it peak)
@@MBBCMonashBeybladeBattlingClub i know, especially when moses canonically split the sea with a bey
🤓
🫡🫡🫡
@zankye
The goat