J35A8 swapped 7th gen Accord
Вставка
- Опубліковано 12 чер 2018
- 7th gen Accord with blown j30 #128Automotive
Swapped in a J35A8 from an 07 Acura Rl
Using the stock transmission
Custom made bell housing brackets and some minor modifications and it fits great
Working on the suspension but excited to see how it runs ..
Stock engine puts out 240hp and 212tq at the crank
J35A8 puts out 290hp and 256tq when it’s all done I’ll
Post a dyno video - Комедії
Info on custom bracket to bolt up to j35a8 mofor with j30 6 speed transmission
Hoping the injector wire pins are the same, just the different mentioned clips?
Im going full bolt-on j35a8 in the summer and i didnt wanna convert more than injector connectors so i bought the whole powerterrain (engine+transmission)
what did you have to do for the custom brackets? i have an 8th gen accord probably going to do this swap as my motor is as good as blown. i also heard it bolts up directly but not 100% sure
Are you using stock j30 ecu?
did you swap the engine wire harness or did wiring or everything plug and play with accord wire harness
Shanki Knott
The wiring harness is virtually the same. The injector clips are different and we wanted to run the type s Injectors so we de pinned the harness and transferred over the clips.
128 Automotive so tranny bolts on or have to change bell housing ? and I seen you did Odyssey swap did you change the bell housing ?
Shanki Knott The bell housing from the J 35a8 To the J 30 is different I had to make my own custom brackets to adapt the engine to the transmission
128 Automotive so can use j35 bell housing to bolt up though or tranny ?
Sorry I had to edit my comment if youre doing a j35 from a Honda Odyssey (j35a6). The engine to transmission is a direct line up
Info about braket pls
they were custom made i never replicated more than 1 set
@@reybermudez6646 you should. There's alot people asking for something like that
@@reybermudez6646 :(