Hi. So do I need to follow these steps to replace my faulty air vent. Also do I need to buy the entire piece you removed which includes the air vent or can I simply replace the air vent unit only? Grateful for your help.
Hi Paul - you can buy the inner vent bit separate - around £50 + vat - may be cheaper to buy the whole part from ebay Here is the detail www.dropbox.com/s/e4qppkrm85n116f/air%20vents.JPG?dl=0
Hi, thank you for the helpening video. One question, is it necessary remove the lower dash, where goes the shift gear, to get the upper dash removed?? thank you!
Can anyone point me to directions on re-installation of the dash components? I can get the pieces aligned with the top and the tabs, but never the bottom plastic bit. I'm afraid to push it too forcibly.
Can you change the centre console / stereo / sat-nav / air-con etc of an LR3 and update it with the LR4 version ?
Hi. So do I need to follow these steps to replace my faulty air vent. Also do I need to buy the entire piece you removed which includes the air vent or can I simply replace the air vent unit only?
Grateful for your help.
Hi Paul - you can buy the inner vent bit separate - around £50 + vat - may be cheaper to buy the whole part from ebay
Here is the detail
www.dropbox.com/s/e4qppkrm85n116f/air%20vents.JPG?dl=0
Hi, thank you for the helpening video.
One question, is it necessary remove the lower dash, where goes the shift gear, to get the upper dash removed?? thank you!
Hey guys, any chance of a response regarding this. I’m also interested. Cheers
How about a video on how to get to blend actuators
How do I remove the speedometer on the L462?
Hiya fellas , absolutely love these videos wondering how possible would it be to put that equipment you've just removed into an LR3
Hi - not sure how much is reverse compatible... not a lot i suspect !
Hello Mate, wondering how to replace the centre dashbaord of mine with a newer one with more spec.Any ideas which mechanics can help?
Link to part deus seems to be missing from the video =(
Can anyone point me to directions on re-installation of the dash components? I can get the pieces aligned with the top and the tabs, but never the bottom plastic bit. I'm afraid to push it too forcibly.
You will have to loosen the gear shift console, slide it back a little to allow the bottom of the vertical piece to go into position.