I had used the wet paper towel trick for cleaning the print heads and even though I had successfully done it before this time I made a mess of it. The paper was jamming with Error 34 and I could not see where the problem was. After seeing your video I took a much closer look and found a 5 mm blob of dried, hard paper towel in the works underneath! I finally extracted it with long tweezers and now the MFC-295CN is working again. Thanks for taking the time to make the video!.
Good Day!!! same unit po ayaw mag continues print, pang isahan nalang siya pwede. Na reset na rin pero ganun pa rin, kinakain ang pang page 2 pag tuloy tuloy. Thanks sa reply 😊
Hi po boss okey n sya wla ng paper jam error/cannot print 35 Dahil wla ng error try kung okey na kaso pag Ng print ko ulit again nag pepaper jam ulit.😢 Anu po kyang problem po?
Hey I did this to my printer but it had no paper or dust obstructing the printer do you think it may be a broken sensor?? The message showing is the same "Print Unable 30"
kuya sana manotice po, baka alam niyo po pano masolve ung hindi naman po siya nakabold sa msword, tapos po pag priniprint po is nagiging bold po, thank you po! Brother mfc-j200 po
Sir pwede po patulong tray not detected. please put the paper try. bigla nlng po nagnotice kasalukuyan po ang printing kalahati lng ang naprint😭 .same unit po. Thank you Sir
I had used the wet paper towel trick for cleaning the print heads and even though I had successfully done it before this time I made a mess of it. The paper was jamming with Error 34 and I could not see where the problem was. After seeing your video I took a much closer look and found a 5 mm blob of dried, hard paper towel in the works underneath! I finally extracted it with long tweezers and now the MFC-295CN is working again. Thanks for taking the time to make the video!.
tysm i was panicking because I'm using the printer to work but fortunately i could solve it thanks to you
You're Welcome
It's our pleasure to help
We are grateful for your support
Por fin quedó!! Ya estaba buscando técnicos jeje gracias!!
Thanks for the clarification, it solved the problem!
You're Welcome
It's our pleasure to help
We are grateful for your support
Well done lads. Thanks for sharing, so helpfull.
You're Welcome
It's our pleasure to help
We are grateful for your support
Good Day!!!
same unit po ayaw mag continues print, pang isahan nalang siya pwede. Na reset na rin pero ganun pa rin, kinakain ang pang page 2 pag tuloy tuloy. Thanks sa reply 😊
Check nyo po Yung paper tray at saka pickup Rubber sa ilalim baka kailangan ng palitan
@@Tech-aidSupport29san nakakabili ng pickup rubber ?
Ask kolang po kung paano ayusin Pag unable to print 40 po Sana po mapansin Nyo msg ko salamat po
Trimh kasih bang, msalh sudh teratasi 🙏🙏
You're Welcome nurulfajriani944.
It's our pleasure to help.
We are grateful for your support.
Hi po boss okey n sya wla ng paper jam error/cannot print 35
Dahil wla ng error try kung okey na kaso
pag Ng print ko ulit again nag pepaper jam ulit.😢
Anu po kyang problem po?
Sir kapag po ba nagpriprint kayo sa photo paper bakat yung shark teeth?
Hindi naman po ma'am pero pwede naman po yan tanggalin
ty for sharing this video 😊
You're Welcome
It's our pleasure to help
We are grateful for your support
Hey I did this to my printer but it had no paper or dust obstructing the printer do you think it may be a broken sensor?? The message showing is the same "Print Unable 30"
Yes maybe
it works thanks！
You're Welcome
sir paano po pag yung error ito "Cannot print 50" ??
Tqsm
kuya sana manotice po, baka alam niyo po pano masolve ung hindi naman po siya nakabold sa msword, tapos po pag priniprint po is nagiging bold po, thank you po! Brother mfc-j200 po
Try nyo po mag cleaning minsan nyan printhead problem na po yan
Sir pwede po patulong tray not detected. please put the paper try. bigla nlng po nagnotice kasalukuyan po ang printing kalahati lng ang naprint😭 .same unit po. Thank you Sir
Try to clean the paper tray sensor
@@Tech-aidSupport29 hello Sir saang part po? Thank you Sir
sir paano po pag "Cannot print 50" yung error?
Mau coba dulu..
Sir pwedi Po patulong ung unit kopo refill y can't print pero Ng ni refel Kona ayaw padin mag print magbyad Po Ako thru gcash po
Confirm ink level nyo lang po sir
kalau diatas gmn om
Paper jam pero wala nmn papel nalinis na..sana ma notice mo lods
Check nyo po Yung paper sensor or try mong palitan ng bagong sensor
@@Tech-aidSupport29kailangan pa dalhin sa repair shop para gawin ito?
@@Tech-aidSupport29saka saan makikita ang paper sensor?
How to fix not printing duplex? The printer cannot pull back the bondpaper back for the back print
Check your print settings and duplex tray
Cannot print 32 paano masolve ang problim sir
Print Unable 32 Head Capping Unable Problem. Step 1. Remove foreign object step 2. Clean CR encoder strip
I got that when i sleep
Can’t get stack copies off sleep dcpl2540dw
Cannot print 40