the original designer of gtil happens to be a filipino and the product is being mass produced in china. If you have questions, you can contact him through his youtube channel or fb group which he is the admin.
I am in the Philippines can you tell me his channel or a name or something please. I have a 2000 watt unit that died yesterday or the name of the fb group?
Check the display battery! most of the time even if it is for memory only it takes te display out if it becomes dead short damaged. It has to do with the way it's connected to the same power line for recharge most of the time inappropriately. If you check it and found 0 Voltage or to low almost 0 Voltage it's damage and preventing the display to get the voltage it needs to work, in this case you just have to replace the battery (you will need the numbers on it to find a replacement so don't throw it away) some times device's can keep working without it in place (without memory) the same as the times the batteries stop's keeping charge in it.
Hi! I will try that, I did measure the voltage on it (of camera) and it was low, only 1v. But I did not test the inverter without memory battery. Thank you for a very good idia!!
Interesting video, question what is the maximum input current that the inverter can withstand, I read the manual but I couldn't find it, only the Watts and volts
Hi, sorry for my late reply, I bought it from AliExpress. A New LCD Display for SUN-1000GTIL2-LCD SUN-2000GTIL2-LCD MPPT 1000W 2000W Solar Grid Tie Inverter Replace star.aliexpress.com/share/share.htm?image=A706bb71d9daf48308fe2de9d2d2bddfaS.jpg&businessType=ProductDetail&title=SEK%20377.80%20%7C%20A%20New%20LCD%20Display%20for%20SUN-1000GTIL2-LCD%20SUN-2000GTIL2-LCD%20MPPT%201000W%202000W%20Solar%20Grid%20Tie%20Inverter%20Replace&platform=AE&redirectUrl=https%3A%2F%2Fwww.aliexpress.com%2Fitem%2F1005001948860732.html%3F%26srcSns%3Dsns_Copy%26tid%3Dwhite_backgroup_101%26mb%3DQDvJmB7yNDkwB5z%26businessType%3DProductDetail%26spreadType%3DsocialShare
Hi erm I hope that you can get back to me so on the same inverter two resistors blew up on the underneath of the circuit board and I cannot find anywhere what the two are so I can fix myself please could you let me know what ones they are that are next to the other two r030 resistors. Thank you
Hi. If it is exporting energy the fans will run when the load is high, but if you only have low loads the fan will be mostly of. Sorry, no idea what’s wrong.
I'm on the third one of these pieces of junk myself. It seems a LOT of people will get a few months of use out of them before they burn out.
Mine is still fine but I haven’t used it for over a year now.
I have 2 running 4 1/2 years. It's set to max at 700watts.
The distance between where we live and China where it all comes from makes it always hard. you´re on the right track, good luck!!
Yes you are so right. Thank you😃
the original designer of gtil happens to be a filipino and the product is being mass produced in china. If you have questions, you can contact him through his youtube channel or fb group which he is the admin.
Wow, Thanks for the info.
I am in the Philippines can you tell me his channel or a name or something please. I have a 2000 watt unit that died yesterday or the name of the fb group?
Check the display battery!
most of the time even if it is for memory only it takes te display out if it becomes dead short damaged.
It has to do with the way it's connected to the same power line for recharge most of the time inappropriately.
If you check it and found 0 Voltage or to low almost 0 Voltage it's damage and preventing the display to get the voltage it needs to work, in this case you just have to replace the battery (you will need the numbers on it to find a replacement so don't throw it away) some times device's can keep working without it in place (without memory) the same as the times the batteries stop's keeping charge in it.
Hi! I will try that, I did measure the voltage on it (of camera) and it was low, only 1v. But I did not test the inverter without memory battery. Thank you for a very good idia!!
Hello. Can you provide the coordinates of the person who mentions the Filipino in their comment?
youtube channel name
Did this work in the end ?
Interesting video, question what is the maximum input current that the inverter can withstand, I read the manual but I couldn't find it, only the Watts and volts
Hi, thank you☺️
40amps at 50v
Yes👍⚡ 🔌💡
Nice job! Can you tell what voltage input electrolytic capacitors are rated?
Thank you sir.
Sadly not now. It’s all put together again.
@@flyingtools Thanks anyway!
I got it! 100V...just got mine on the wall today..I think a great idea is to have an extra fan for cooling...
Extra cooling is always 👍🏻
My friend.Did you find the display?? and where from ???Thank you very much
Hi, sorry for my late reply, I bought it from AliExpress.
A New LCD Display for SUN-1000GTIL2-LCD SUN-2000GTIL2-LCD MPPT 1000W 2000W Solar Grid Tie Inverter Replace
star.aliexpress.com/share/share.htm?image=A706bb71d9daf48308fe2de9d2d2bddfaS.jpg&businessType=ProductDetail&title=SEK%20377.80%20%7C%20A%20New%20LCD%20Display%20for%20SUN-1000GTIL2-LCD%20SUN-2000GTIL2-LCD%20MPPT%201000W%202000W%20Solar%20Grid%20Tie%20Inverter%20Replace&platform=AE&redirectUrl=https%3A%2F%2Fwww.aliexpress.com%2Fitem%2F1005001948860732.html%3F%26srcSns%3Dsns_Copy%26tid%3Dwhite_backgroup_101%26mb%3DQDvJmB7yNDkwB5z%26businessType%3DProductDetail%26spreadType%3DsocialShare
Hi erm I hope that you can get back to me so on the same inverter two resistors blew up on the underneath of the circuit board and I cannot find anywhere what the two are so I can fix myself please could you let me know what ones they are that are next to the other two r030 resistors. Thank you
Hi. I’m sorry but I do not use or have this anymore. I really wish that I could help you. Hope you can fix it in som way.
How to open the assembly (fac) settings which pops up after the first start? settings got saved badly?
Sadly, I have not been able to do that.
hello, I have a Sun2000 grill and the fan works non-stop, what is the problem
Hi.
If it is exporting energy the fans will run when the load is high, but if you only have low loads the fan will be mostly of.
Sorry, no idea what’s wrong.
any luck finding replacement parts?
Yes, i bought it from AliExpress
Do you know how to factory reset the inverter to reset the kwh records
I think that someone wrote that in a comment, but I can not remember how anymore.
I have a 2000 watt unit it died after like 2 years I am in the Philippines and repair is not a good option.
It shows grid as being like 3.0 volts and it produces zero, nothing from pv
Oh, really sad to hear.