I'm having problems. Motion won't stop when using G31.1, only G31 will work. Maybe you will find a solution. After some googling it seems pockeys57cnc doesn't support multiple probes.
Czesc. Jak po czasie sprawdza się ta sonda? Będzie część druga z instalacji? Pracuję okazyjnie na maszynie na Piko i zastanawiam się czy taka sonda zda egzamin.
I don't think pokeys supports any more than 1 probe or using g31.1, I have not seen any updated plugins or firmware that supports 4 probes, if I am wrong please post a link for it.
Hi, its good to see videos on the pokeys57cnc. I am about to install a probe just like yours and have been wondering, because its a three wire, how the signal wire should be connected to the board. Should i use the 5v ( from pendant connector ) and ground from pokeys and then simply connect the signal wire from probe to pin 19 ?? i really dont want to blow up my board. thanks.
Do you know if something needs to be set up in the mach? I have an identical probe, and I will also need to measure the corner
Hi is part 2 posted?
Hello! Nice work. Looking forward to the next video, just doing this myself and trying to figure out the scripting in mach 4 using 2 probes.
Thank you. It will be shortly out I'm on quick holiday 🙂.
I'm having problems. Motion won't stop when using G31.1, only G31 will work. Maybe you will find a solution. After some googling it seems pockeys57cnc doesn't support multiple probes.
@@Abrinkmark hi it dose on software what was not publicly realised. I will let know what to use in upcoming video.
...no more 2nd part ??
what brand probe is that?
No Name
Czesc. Jak po czasie sprawdza się ta sonda? Będzie część druga z instalacji? Pracuję okazyjnie na maszynie na Piko i zastanawiam się czy taka sonda zda egzamin.
Would love more info!
I don't think pokeys supports any more than 1 probe or using g31.1, I have not seen any updated plugins or firmware that supports 4 probes, if I am wrong please post a link for it.
I am still waiting for part 2
Hi, its good to see videos on the pokeys57cnc. I am about to install a probe just like yours and have been wondering, because its a three wire, how the signal wire should be connected to the board. Should i use the 5v ( from pendant connector ) and ground from pokeys and then simply connect the signal wire from probe to pin 19 ?? i really dont want to blow up my board. thanks.
It's s pity there is no answer to your question....did you solve the problem with the signal wire?
Also curious!
he shows you at the end of the video how to connect it!