Just want to make one quick note: somewhere around the middle/end of March, the wire was swapped from Kevlar wire to DX-WIRE UL (www.dx-wire.de/dx-wire-antennendraehte-litzen/dx-wire-ul/) Vectran Wire. This still allows for great strength antenna wire, but I was able to reduce the cost of the kit by purchasing this wire. I'm always interested in suggestions for future wire use in different kits. ****Kits are currently not available until appx June 2024****
Good job Sean. I would probably use another screw and wing nut for the antenna wire instead of soldering. Makes it easier to repair in the field when the wire breaks.
Great suggestion, actually. I am out of kits now. I should have more supply in the next week. However, because of the amount I ordered, I got a discount, which should allow me to add the extra set of hardware in, for the choice of the builder.. Take care.
Bought it, built it, tuned it, used it on a POTA got the longest contact in my logbook of almost 10,000 miles! My FT710 can tune on 10m. No tuner needed across all of the other 3 bands! It is my new go to for POTA. I put the feed point on a 15 foot mast and stake the end in the ground. AWESOME! W2UWK 73
I love hearing stuff like this! Nice and thanks for sharing! Yesterday, I took a tech out and his first contact with the antenna was (if I recall correctly) France and Spain. Too easy. It's the winders, I added some 10dB mixture to them :D
This is absolutely the best EFHW out there!! I just printed the winder, and I love it. I did change things as an experiment using a autotransformer winding, and trying a variable capacitor instead of fixed. I'll try tuning the capacitor for the best match. Very nice video on how to put this thing together. Thank you!!
Nice build demo. Wouldn't it be better to place the ground lug between the hex nut and lock washer, and then screw the bolt tight, thereby squeezing the ground lug between the bottom of the hex nut and lock washer? Then the wing nut will fit tight against the top of the hex nut for connecting the counterpoise. Just a thought. 73 Ken -- WBØOCV
22 gauge. It's been good for 100w on ft8 digital for an hour at a time. I'm thinking about beefing it up to 18. That will definitely beef it up more. What are your thoughts
Just bought one of these and will build it this weekend. Apologies for the stupid q, but if I have continuity between the inner and outer post of the So239 wouldn't that mean the antenna is shorted?
Hey there! I hope you enjoy the build! @Mike-M0MSM made a pretty good video here - ua-cam.com/video/mVlFHi2qpWo/v-deo.html . Or perhaps his description is easy enough, as well: From Mike's video - "Why is it showing a Short Circuit. 49:1 Transformer EFHW Well that's because it is. Let me explain, if you use a multi-tester to check continuity it will show a short circuit, in the same way that a voltage transformer does. With the 49:1 both ends of the wire are connected to the coax, one to the centre the other to the braid or shield. and if you were to connect it to a DC power source it would indeed go short, heat up and blow/pop or melt depending on the energy used. However, the 49:1 is used in an AC circuit and therefore it is not a sort, it acts as a inductor, inducing current into the secondary windings and as such transforming the 50 Ohms Load from the transceiver into the 2800 Ohms needed by the antenna and vice versa." I hope this is helpful for clarity, and good luck with the build, I hope it goes well for you!
Looks like you’re using the “new” 2463251002 torriod. Not the 140 or 240 43 mix. Just bought several to try. Seen some videos where it gives you about 10-15% more efficiency especially at the higher frequencies. Hadn’t seen a kit come with one yet.
Hello. I just followed the link to the etsy store and all the parts are layed out to build your own: NO wire in these kits. . Please remember, USPS Ground Advantage can be slow. I have no control over that. If you wish, purchase priority mail. Build Instructions are now available at www.hamradiodude.com/Build_Instructions_v1.0.pdf (Build instructions may be slightly different than the build video due to changing parts / upgrades during the process between the video and Instructions) Build Video - ua-cam.com/video/Y-ojVTQbszw/v-deo.html EFHW KIT WITHOUT Heavy Duty Wire. This End Fed Half Wave Kit includes the following: - One SO239 wire, 3D printed in ASA, a great material with UV Protection and higher warp temperatures. - Appx 5.5 Feet - of 18 Gauge Magnet Wire . This should leave you plenty of extra. 1 - 100pf / 3kv capacitor 1 - SO239 Connector 1 - 1934-1079-ND Toroid . This is really about 3 times the mass as a T140-43. 1 - 1"x8" Cinch Elastic Cable to hold wire 2 - zip ties 1 set of Stainless Steel Hardware (#8 size) 1 Dude Coil (This helps bring 20, 15 and 10 into a better resonance). Heavy Duty wire is expensive. This kit saves 30 USD by not including the wire, so you can buy some cheap wire or use what you have around the home. This kit is something you build. I prefer a 49:1 winding with a crossover at turn 8. This is ham radio, feel free to experiment. ... So to answer the question, 18AWG BNTECHGO
Just want to make one quick note: somewhere around the middle/end of March, the wire was swapped from Kevlar wire to DX-WIRE UL (www.dx-wire.de/dx-wire-antennendraehte-litzen/dx-wire-ul/) Vectran Wire. This still allows for great strength antenna wire, but I was able to reduce the cost of the kit by purchasing this wire. I'm always interested in suggestions for future wire use in different kits. ****Kits are currently not available until appx June 2024****
Good job Sean. I would probably use another screw and wing nut for the antenna wire instead of soldering. Makes it easier to repair in the field when the wire breaks.
You could definitely. It considered my mind also. Hardware is cheap at the store. Also could be made into a fan dipole the same way. Cheers.
Great suggestion, actually. I am out of kits now. I should have more supply in the next week. However, because of the amount I ordered, I got a discount, which should allow me to add the extra set of hardware in, for the choice of the builder.. Take care.
Built this last week and tuned it while I was activating US-2988. Great antenna!
Bought it, built it, tuned it, used it on a POTA got the longest contact in my logbook of almost 10,000 miles! My FT710 can tune on 10m. No tuner needed across all of the other 3 bands! It is my new go to for POTA. I put the feed point on a 15 foot mast and stake the end in the ground. AWESOME! W2UWK 73
I love hearing stuff like this! Nice and thanks for sharing! Yesterday, I took a tech out and his first contact with the antenna was (if I recall correctly) France and Spain. Too easy. It's the winders, I added some 10dB mixture to them :D
This is absolutely the best EFHW out there!! I just printed the winder, and I love it. I did change things as an experiment using a autotransformer winding, and trying a variable capacitor instead of fixed. I'll try tuning the capacitor for the best match. Very nice video on how to put this thing together. Thank you!!
Such kind words, thank you. I would love to know which variable capacitor you use?! I think that would be fun!
I found that cutting board from dollar store is good for making parts for the enclosure. Good for winding antenna wire or mounting board for toroid.
Finished my build, can't wait to put the antenna into action. Thanks for a great video!
NICE! Lets go POTA.
Great job Sean! Keep it up and do what you do!
Thanks! Will do! take care, aloha.
I can't wait, just bought one.. thanks, and keep em coming.
Well up in the air but liking that it is kevlar
Thanks!
Thank You!
Well done and nicely presented. Thank you.
Nice build demo. Wouldn't it be better to place the ground lug between the hex nut and lock washer, and then screw the bolt tight, thereby squeezing the ground lug between the bottom of the hex nut and lock washer? Then the wing nut will fit tight against the top of the hex nut for connecting the counterpoise. Just a thought. 73 Ken -- WBØOCV
Once you fit the fork connector in there, there's no issue.. cheers
I just re read this. Yes that'll work! Thanks
Looks like a nice kit 👍
Se agradece citar medidas en "metros" 73 desde la Republica Argentina.
Gonna test mine today.
Awesome. Feel free to shoot me an email with any questions. Thanks and enjoy
Does the sticker include spicy ketchup? Nice build guide, Dude.
when will this be back in stock? I have checked multiple times. 73 NS9T
10 weeks or so. There is a delay on the toroid's and no companies have them, unfortunately (Except the ones that mark them up). Thanks!
@@HAMRADIODUDE anxiently awaiting...thanx
Maybe you mentioned in video, but I missed it. What gauge of magnet wire are you using there?
22 gauge. It's been good for 100w on ft8 digital for an hour at a time. I'm thinking about beefing it up to 18. That will definitely beef it up more. What are your thoughts
I just picked up some 18. I think I used 16 on another build a while back. Wasn't too hard to wrap.
Do you sell these fully assembles: I am partially blind and will never be able do do this correctly
I can do that. Reach out to me and I'll be happy to figure out all the details. Thanks.
Just bought one of these and will build it this weekend. Apologies for the stupid q, but if I have continuity between the inner and outer post of the So239 wouldn't that mean the antenna is shorted?
Hey there! I hope you enjoy the build! @Mike-M0MSM made a pretty good video here - ua-cam.com/video/mVlFHi2qpWo/v-deo.html . Or perhaps his description is easy enough, as well: From Mike's video -
"Why is it showing a Short Circuit. 49:1 Transformer EFHW Well that's because it is.
Let me explain, if you use a multi-tester to check continuity it will show a short circuit, in the same way that a voltage transformer does. With the 49:1 both ends of the wire are connected to the coax, one to the centre the other to the braid or shield. and if you were to connect it to a DC power source it would indeed go short, heat up and blow/pop or melt depending on the energy used. However, the 49:1 is used in an AC circuit and therefore it is not a sort, it acts as a inductor, inducing current into the secondary windings and as such transforming the 50 Ohms Load from the transceiver into the 2800 Ohms needed by the antenna and vice versa."
I hope this is helpful for clarity, and good luck with the build, I hope it goes well for you!
@@HAMRADIODUDE Yep that clears it up thanks :)
The cooling fan is sucking out the air or blowing in? I'm confused about the direction it should be on my go box. Please help!!!
Is this in reference to something on this video? If so, please link me a time stamp. Thanks.
I just got this kit and didn't receive the capacitor with it. What size cap do I need to buy .
@kenfloyd5507 hi, if you reach out to me on Etsy I can get you the correct capacitor
Looks like you’re using the “new” 2463251002 torriod. Not the 140 or 240 43 mix. Just bought several to try. Seen some videos where it gives you about 10-15% more efficiency especially at the higher frequencies. Hadn’t seen a kit come with one yet.
What size is the capacitor that came with the kit?
100pf / 3000kv, Cheers!
What size magnet wire
Hello. I just followed the link to the etsy store and all the parts are layed out to build your own:
NO wire in these kits. . Please remember, USPS Ground Advantage can be slow. I have no control over that. If you wish, purchase priority mail.
Build Instructions are now available at www.hamradiodude.com/Build_Instructions_v1.0.pdf (Build instructions may be slightly different than the build video due to changing parts / upgrades during the process between the video and Instructions)
Build Video - ua-cam.com/video/Y-ojVTQbszw/v-deo.html
EFHW KIT WITHOUT Heavy Duty Wire.
This End Fed Half Wave Kit includes the following:
- One SO239 wire, 3D printed in ASA, a great material with UV Protection and higher warp temperatures.
- Appx 5.5 Feet - of 18 Gauge Magnet Wire . This should leave you plenty of extra.
1 - 100pf / 3kv capacitor
1 - SO239 Connector
1 - 1934-1079-ND Toroid . This is really about 3 times the mass as a T140-43.
1 - 1"x8" Cinch Elastic Cable to hold wire
2 - zip ties
1 set of Stainless Steel Hardware (#8 size)
1 Dude Coil (This helps bring 20, 15 and 10 into a better resonance).
Heavy Duty wire is expensive. This kit saves 30 USD by not including the wire, so you can buy some cheap wire or use what you have around the home.
This kit is something you build. I prefer a 49:1 winding with a crossover at turn 8. This is ham radio, feel free to experiment.
...
So to answer the question, 18AWG BNTECHGO
i need one!
Looks like there is about 3 kits left this morning. There will be a delay after that while I await a new shipment of wire.
What toroid is that?
1934-1079-ND
Resonant over random everyday for me.
wego